Hi Scott My experiences getting BOTTOM PAINT REPLACED at Riverside Drive Marina. (Whangarei). For environmental reasons blasting antifoul paint off was not allowed. So it was done by hand by Limbard

We leave approx. 1/4 tank of water, maybe less. The n affect about 200 ml of H2O2, just before leaving the boat. We wait a bit, then ruin each faucet for a minute, and flush our toilets (fresh water).

How much H²0² Matt? Does it keep the tanks from getting growth? Do you flush the tanks when you get back to the boat? Is it bad for the watermaker membranes? Thanks Kent SM 243 Keisty -- Kent &

Ben, Here are the instructions that Oliver B. kindly provided me. Best, James Alton SV Sueno Maramu #220 The reason for reducing the slack in the cables (in fact in the cables sheaths) is to reduce

Hi everyone, Can anyone explain to me how to tighten the steering cables in my maramu? I understand that the metal flaps need to be lifted in order for the nuts to be able to turn but what then? What

While on the subject of anchor wash, once we added the Marco pump (which has a pressure switch) we could also add a 3-way valve in the bow locker and connect a hose and nozzle into the system. We

We add Hydrogen Peroxide to our water tank when we’re leave the boat for any amount of time.

I need to apologise for stupid thing that have happened. After assembling yesterday afternoon I tested and it happened what I have written this morning. Today I did all again, alone, and when I got

Sorry you're having problems, Slavko. If the motor is spinning and the prop is not, it has to be in the drive train. Vertical shaft, 90° bevel gear, prop shaft, pin, hub, or nylon bolts. Have you

Great, Doug. Will follow your precise instructions. Gesendet von Yahoo Mail für iPhone Am Donnerstag, Juni 23, 2022, 3:54 PM schrieb Doug Smith via groups.io <dugsmith98@...>:

Yes Bill, installed by AMEL. Thank you very much, will check. Gesendet von Yahoo Mail für iPhone Am Donnerstag, Juni 23, 2022, 3:06 PM schrieb CW Bill Rouse <brouse@...>:

Thank you so much Roque.

IMHO DON'T leave ANYTHING on standby......not only could it cause a problem like this, but anything left on when you are not using it consumes electricity..... As for all that TV carry on, I have to

Hi Roland, Some years ago we replaced our anchor wash pump with a Jabsco Par Max 5 pump...I think they are now superseded.... BUT you don't need to hunt down the original pump Amel used....your boat

Hi Roland, Hopefully, you should be able to see required specs on the attached pictures. Good luck! Alex

I hope no rules are broken with this info. I just found out that new marina in Pula, Croatia is offering wery attractive deals for wintering and year-round contracts for 2022-2023. They will go up to

I am back with bow thruster problem. Yesterday, when back from 10 days sailing bow thruster worked on one side and just spining on the other side. I replced all parts with new ones that I got few

Hi Paul, We've done the AICW several times in our Santorin, going outside when favorable but having been inside for the entire route from southern Florida to Norfolk at one time or another. There are

Got it. the stng is perfect for this. CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com View My

Hi, For anyone looking to integrate old and new instruments, you should look at the Pitufino device : https://www.pitufa.at/pitufino/ It’s a versatile converter, translator and multiplexer of