I have glued back a bit of the insulation that was sagging a couple of times. I found single pack contact cement to be ineffective but two pack neoprene contact cement to work, so far. Another option

Charlie The copper strap you are fitting to the keel bolt. You may find a green and yellow wire attached to the engine/C drive which is currently doing nothing. This should be attached to the top end

Good day all. I am currently in the process of replacing the steel backing plates for the gas strut brackets. It is time to reassemble everything, and I am looking for a recommendation on what type of

Hi Ben- I’m currently dealing with this exact problem. My Super Maramu is in a boatyard having the rust removed from the keel, but my bonding system is non-existent. I purchased a copper bar exactly

Thanks Ian, much appreciated.

HonStu, thanks for coming back so quickly. We’re doing a full paint job on the hull (well getting a pro to do that for us) and also the cockpit and possibly even decks - time and brain fatigue

Dear all, Perhaps some of us had not sufficient time and patience to watch the video through the end: at a certain point the speaker more or less says “beautiful ? No, it’s only a fake and I’ll

Hi group sometimes good news can be shared :-) just received the new sails (main and mizzen, pro radial) from QSAILS. They arrived just in time and look great. We ordered in February, agreed deadline

RAL 1013 is the colour of the deck and masts on the SM an SN - oyster white. I don’t know a RAL colour for the hull white. Ian

I fear you will usually be disappointed with trying to “rub out” the faded spots on an Amel deck. The way these were made was the “brown” gel coat was brushed into the mold by hand, and then

Thanks, I will try it. Richard

Richard, I have seen acid or products with acid like On-OFF cause this to the colored Gelcoat faux teak. I think if that is the cause there is no reversing unless you can remove just the top surface

I have some spots where the color is gone from the faux deck, almost like drops of bleach hit it. Is there any stain that can be applied to restore the look? RichardDallett Mamba A54/68

It is a ploy to get clicks and generate advertising revenue, nothing more. They don't show you the cable running under the grass to power it. This video has been debunked many

These are just to collect views, somehow people catch on to these and generate views to the makers and makers get ad money. Sorry to ruin your hopes 🙂 -- Fair winds Ruslan Osmonov Phanthom, A54

Hi Sarah & Trev: The color is RAL 1013. It’s often called Oyster White but goes by other names as well. I hope this helps. Definitely try a test area first. Imay not match the other off-white on

good day to you, maramu owner did & do the cleaning once a year; set of scraper & brush on long wooden handle - I remove all suction hoses & replace. I also have the M32 socket welded on a steel tube

Thanks Richard, our boat's in Greece, when I read your message, this image flashed in my mind!! 🤣 Rachael & Robin Courtenay Pérdika SM232 Leros, Greece

My A 55 #63 from end 2017. I repainted all hatches this year plus different zones on masts . Envoyé de mon iPhone

Classic local corrosion . To be treated locally Envoyé de mon iPhone