|
Re: Northern Lights Generator wont start
Mark,
As Bill said, most of us have Onan's so we won't have any Norhern Lights specific knowledge or experience to assist you. However, there are some common generator starting issues including a
Mark,
As Bill said, most of us have Onan's so we won't have any Norhern Lights specific knowledge or experience to assist you. However, there are some common generator starting issues including a
|
By
Mark McGovern
·
#64867
·
|
|
Re: Bowthruster Power and a Fuse/Disruptor
Alexander,
Jose Venegas of Ipanema SM2000 Hull #278 posted his bowthruster power consumption data here: https://amelyachtowners.groups.io/g/main/message/63102
The peak current draw was about 450A and
Alexander,
Jose Venegas of Ipanema SM2000 Hull #278 posted his bowthruster power consumption data here: https://amelyachtowners.groups.io/g/main/message/63102
The peak current draw was about 450A and
|
By
Mark McGovern
·
#64866
·
|
|
Re: Continious soft shackle
Google Lens Search:
CW Bill Rouse Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
www.AmelOwnersYachtSchool.com
View My Training Calendar
Google Lens Search:
CW Bill Rouse Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
www.AmelOwnersYachtSchool.com
View My Training Calendar
|
By
CW Bill Rouse
·
#64865
·
|
|
Re: Continious soft shackle
They are also available in Martinique from Amel Caribe
They are also available in Martinique from Amel Caribe
|
By
Courtney Gorman
·
#64864
·
|
|
Bowthruster Power and a Fuse/Disruptor
Dear fellow Amelians,
Does anyone know power characteristics (kW or Amps) of Super Maramu 2000’s (2004 onwards) bowthruster and whether it has any fuse or disruptor, apart from the one on the 24V
Dear fellow Amelians,
Does anyone know power characteristics (kW or Amps) of Super Maramu 2000’s (2004 onwards) bowthruster and whether it has any fuse or disruptor, apart from the one on the 24V
|
By
Alex Lomakin
·
#64863
·
|
|
Re: Continious soft shackle
Very easy to make.
search YouTube for “Dyneema Loop”
There are a few good videos. My favorite is by a guy with a British accent, from Bottom Up - Boats.
Very easy to make.
search YouTube for “Dyneema Loop”
There are a few good videos. My favorite is by a guy with a British accent, from Bottom Up - Boats.
|
By
Matt Salatino
·
#64862
·
|
|
Re: Continious soft shackle
hi Eric,
Hope all is well. I have purchased a couple of these continuous soft shackles from local West Marine rigger (her name at the Kemah location store is Tania) for about $25 for 3mm dynema
hi Eric,
Hope all is well. I have purchased a couple of these continuous soft shackles from local West Marine rigger (her name at the Kemah location store is Tania) for about $25 for 3mm dynema
|
By
David Dickman
·
#64861
·
|
|
Re: Continious soft shackle
Eric,
Would you happen to know the various rope diameters for the A54? I recall that the one used for the main sheet is a larger diameter than the others.
I’m away from by boat at present
Eric,
Would you happen to know the various rope diameters for the A54? I recall that the one used for the main sheet is a larger diameter than the others.
I’m away from by boat at present
|
By
Paul Dowd and Sharon Brown
·
#64860
·
|
|
Re: Continious soft shackle
Doug,
Thanks very much for that a good link.
Peter Forbes
Carango Amel 54 #035
Lymington UK
0044 7836 209730
Doug,
Thanks very much for that a good link.
Peter Forbes
Carango Amel 54 #035
Lymington UK
0044 7836 209730
|
By
Peter Forbes
·
#64859
·
|
|
Re: FIRE EXTINGUISHER USCG CERTIFIDE SM2K #430
Thank you Mohammad,
Update here, I was able to get them refilled and hydro tested finally. The problem they had was taking the valves off. These fittings are not the normal ones this company was
Thank you Mohammad,
Update here, I was able to get them refilled and hydro tested finally. The problem they had was taking the valves off. These fittings are not the normal ones this company was
|
By
Chip Beaman
·
#64858
·
|
|
Re: FIRE EXTINGUISHER USCG CERTIFIDE SM2K #430
Hi,
We just serviced all fire extinguishers in Corfu including the manual and automatic engine room canisters. Did not run into any issues.
Happy Sailing;
Mohammad and Aty
B&B
Hi,
We just serviced all fire extinguishers in Corfu including the manual and automatic engine room canisters. Did not run into any issues.
Happy Sailing;
Mohammad and Aty
B&B
|
By
Mohammad Shirloo
·
#64857
·
|
|
Re: Continious soft shackle
Hi Eric,
Amel has them. I added some to my order to Maud last time.
Happy Sialing;
Mohammad and Aty
B&B Kokomo
Amel 54 #099
Hi Eric,
Amel has them. I added some to my order to Maud last time.
Happy Sialing;
Mohammad and Aty
B&B Kokomo
Amel 54 #099
|
By
Mohammad Shirloo
·
#64856
·
|
|
Re: Replacing battery on Feruno Navnet 2
Hello,
I changed the battery on my Furuno GP 90. It is a lithium 2450. price 2 euro. But it is difficult to do because the battery is soldered inside the GPS. Removing the old one with a soldering
Hello,
I changed the battery on my Furuno GP 90. It is a lithium 2450. price 2 euro. But it is difficult to do because the battery is soldered inside the GPS. Removing the old one with a soldering
|
By
Dominique Sery <dominiquesery@...>
·
#64855
·
|
|
Re: Storage hot water system
search for my post about converting the elements to a 12/24 volt element. and rigging the bmv 712 with a battery protect from victron to create an solar dump load of you will. you will retain hot
search for my post about converting the elements to a 12/24 volt element. and rigging the bmv 712 with a battery protect from victron to create an solar dump load of you will. you will retain hot
|
By
Eric Meury
·
#64854
·
|
|
Re: Continious soft shackle
Hello,
Defender has some: https://www.defender.com/product.jsp?path=-1|2259973|2260013|2260028&id=4068021
They are pricey though so if you can make your own it's probably a much better deal.
-
Hello,
Defender has some: https://www.defender.com/product.jsp?path=-1|2259973|2260013|2260028&id=4068021
They are pricey though so if you can make your own it's probably a much better deal.
-
|
By
Justin Paulsen
·
#64853
·
|
|
Re: tb/Electric Furler for AMEL 54/AYOG
Morning David,
Update on my situation:
After we got the motor out of the housing of the Stay sail furler the marine electrician tested and concluded the (Italian made) motor was completely
Morning David,
Update on my situation:
After we got the motor out of the housing of the Stay sail furler the marine electrician tested and concluded the (Italian made) motor was completely
|
By
Teun BAAS
·
#64852
·
|
|
Re: Continious soft shackle
Eric,
They are pretty easy to make with some 1/4 “ dyneema. I searched for a while but couldn’t find anyone selling what I was trying to replace.
With the right fids, it takes about 15-20
Eric,
They are pretty easy to make with some 1/4 “ dyneema. I searched for a while but couldn’t find anyone selling what I was trying to replace.
With the right fids, it takes about 15-20
|
By
Doug Smith
·
#64851
·
|
|
Re: Sheaves for topping lift on the mizzen
You will need to get them made be a sheave maker. Google it.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
You will need to get them made be a sheave maker. Google it.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550
|
By
CW Bill Rouse
·
#64850
·
|
|
Re: Northern Lights Generator wont start
You probably will not get much help here. Northern Light generator was never used by Amel.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island,
You probably will not get much help here. Northern Light generator was never used by Amel.
Best,
CW Bill Rouse
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island,
|
By
CW Bill Rouse
·
#64849
·
|
|
Re: FIRE EXTINGUISHER USCG CERTIFIDE SM2K #430
Yes Eric, will shut down both engines and fans.
There is a override to let engines start afterwards. Manual cable release as well as heat.
Michael Nebo sm251
Yes Eric, will shut down both engines and fans.
There is a override to let engines start afterwards. Manual cable release as well as heat.
Michael Nebo sm251
|
By
Michael Winand
·
#64848
·
|