I have these screws here (in the yellow mark) Regards Marian

Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does

I asked them soecificalky about this. This was the response: ================= Dear Arno, thank you for your email and pointed out the incorrect information on the website. We will arrange to make

This is the best rigger in Europe, although there are other good ones. https://preparetocastoff.blogspot.com/p/nicky-rigging-marine-services.html Bill CW Bill Rouse Amel Owners Yacht School +1

Good morning! I have discovered one of my floorboard hatches is broken and needs replacing. I emailed Maude a couple days ago and am awaiting a reply. In the meantime I thought I’d check with the

QUICK UPDATE, BAMER just sent an Email apologizing for the delay and indicated they are prepared to send new motors & brakes to AUSTRALIA. Very positive development and I will keep you

Hi Martin & Anke, try to get in touch with Sonja Kessler ( amel.med@... ) Amel mediterrané. She is the local representative from Amel in Hyères and very helpful. In any cases for us med cruisers.

Hi all, We want to replace the upper shrouds, middle shrouds and lower shrouds of the main mast . Is there a recommended rigger on the French or Spanish Mediterranean coast? All the necessary

Slavko, I think it is all about the bulbs. The actual light fitting does not care. If you use LED bulbs then get 10-32v. Nick S/Y Amelia AML 54-019 Leros

Thanks Ralph. Nick

I just got delivered Aqua Signal 34 LED Tricolor plus anchor navigation light. Regarding voltage it is written 12/24V. I can not find the max voltage for this lamp. Should I convert 24V to 12V to be

Hi Nick, the battery for the MFDBB (Navent 3d Black Box) is a CR 3032 but you don't have to change it since it has no use Here the feedback from Furono support: That is a common button cell battery

Mark, This sounds a lot like a bad or weak battery. One thing to try: Start the engine and let it run for about 15 minutes. Be sure you are charging the 12v starter

Hi Ruslan, I found NauticLed are ok quality. I installed some of them year ago and they still work. https://www.nauticled.com/ Best Regards, Vladan A54 #157 SV PAME Get Outlook for iOS

Have you ever used AlexSeal? https://www.alexseal.com/ It is a two part paint offered by chemists who used to work for Aksonobel - who produce Awlgrip. I have no affiliation with AlexSeal and have

Hi, can someone suggest good quality G4 LED lights that you been happy with? In the past month I replaced 4 lights, so now researching and looking for something that would last claimed thousands of

Check MauriPro, Wichard soft shackle with SST dogbone: https://www.mauriprosailing.com/us/SRCH.html -- Mark & Debbie Mueller former Brass Ring A54

Mark, As Bill said, most of us have Onan's so we won't have any Norhern Lights specific knowledge or experience to assist you. However, there are some common generator starting issues including a

Alexander, Jose Venegas of Ipanema SM2000 Hull #278 posted his bowthruster power consumption data here: https://amelyachtowners.groups.io/g/main/message/63102 The peak current draw was about 450A and

Google Lens Search: CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com View My Training Calendar