Thanks, Teun, I will communicate with Caterina. Louis

Hi Louis, Let me check with BAMAR and I will come back to you. Earlier BAMAR/Ms. CAMMAROTO sent mein trust a confidential video – to help me out. Although, for a while, I was not happy with

Hello Teun, I still have one BAMAR MEJ 2 installed on AMELIA II on the Genoa. This unit is now using the motor that was on the staysail system which I replaced last year by a manual furling system

Further (and hopefullyFINAL) update: BAMAR is sending 2 motors & brake sets to AUSTRALIA this week prior to their closing for the Summer Holidays this Friday (tomorrow). They offered a

Hi Christian, That is a bit confusing. Sorry I don't have the answer. I ended up sourcing the gaskets through a local chandlery. They charged 12.59NZD which is about 7.77euro per meter. So hopefully

Hopping on this one- Thanks for the info, Mike Do you know if the prices listed on their site are per meter? if so the hatch gasket pricing is confusing, as said 6.02 when click quantity, but has

Hi Lance, If they are tradition portlights, the seal is 8mm diameter round EPDM foam. Here's one website that can supply it:

I think you might have the Tradition Series. Start by downloading the following: Goiot Distributors.pdf Goiot Tradition Hatches Catalog.pdf CW Bill Rouse Amel Owners Yacht School +1 832-380-4970

I have these screws here (in the yellow mark) Regards Marian

Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does

I asked them soecificalky about this. This was the response: ================= Dear Arno, thank you for your email and pointed out the incorrect information on the website. We will arrange to make

This is the best rigger in Europe, although there are other good ones. https://preparetocastoff.blogspot.com/p/nicky-rigging-marine-services.html Bill CW Bill Rouse Amel Owners Yacht School +1

Good morning! I have discovered one of my floorboard hatches is broken and needs replacing. I emailed Maude a couple days ago and am awaiting a reply. In the meantime I thought I’d check with the

QUICK UPDATE, BAMER just sent an Email apologizing for the delay and indicated they are prepared to send new motors & brakes to AUSTRALIA. Very positive development and I will keep you

Hi Martin & Anke, try to get in touch with Sonja Kessler ( amel.med@... ) Amel mediterrané. She is the local representative from Amel in Hyères and very helpful. In any cases for us med cruisers.

Hi all, We want to replace the upper shrouds, middle shrouds and lower shrouds of the main mast . Is there a recommended rigger on the French or Spanish Mediterranean coast? All the necessary

Slavko, I think it is all about the bulbs. The actual light fitting does not care. If you use LED bulbs then get 10-32v. Nick S/Y Amelia AML 54-019 Leros

Thanks Ralph. Nick

I just got delivered Aqua Signal 34 LED Tricolor plus anchor navigation light. Regarding voltage it is written 12/24V. I can not find the max voltage for this lamp. Should I convert 24V to 12V to be

Hi Nick, the battery for the MFDBB (Navent 3d Black Box) is a CR 3032 but you don't have to change it since it has no use Here the feedback from Furono support: That is a common button cell battery