I am wondering where I can find the production number of our Mango.

Well Bill, it is also raining here in Boston and it will rain all weekend. Thanks for the pix and info. I will be checking my spares but the current project is to get rid of the shrink wrap.

Bonjour , Thank you for this detailed information. My valves have never been changed. Since I managed to re-open it, I will wait to be on the hard to do the job according to your operating

I am looking to replace the Frigiboat refrigerator for a 12V/110V system. Any suggestions? Thanks. Roy Duddy Duddy Law Offices 231 North Amherst Road Bedford, NH 03110 603-472-8500 603-472-7333

All, It is a rainy day in Malaysia so I thought I would investigate why the salt water supply to the heads is not as good as it should be. I documented the process and took photos as I removed each

Hi Bill, I have deleted some old files. I hope nobody is concerned about them. Thanks for the alert. Jose Luis GM

Hi Yves, Usually, if the ball valve looks like it is glassed over, it has not yet been replaced. If you look closely you should see that the material overlapping the valve is a relatively thin

To all. When we have had to replace the valves we used 2 pipe wrenches one to stop any damage to the mounting (turn as if to tighten the other with a longer handle to loosen) it's worked every time. I

Hi Bill, As i wrote you the inductive sensor IB 5076 is avelible from  ifm espana.  Price e 78,- delivery time 3-5 days e mail @ifm.com info.es  ore alex.cortes@... ( sales menager) tel 0034

Hi Bill, I placed the order which was confirmed to the branch in Melbourne. This was confirmed in writing. I rang them today inquiring when I would receive the purchase. I was told the part was not in

Bonjour John, The valve itself is definitely above the waterline and can be removed while the boat is in the water. The problem I am facing is that it is difficult to remove / unscrew from the

Barry, OK, I have the Product cut-sheet that you uploaded. I had previously downloaded the same cut-sheet from the IFM website. My purposes are to try to order a replacement. I also have been in

Files->Chain Counter Information->IB5076.PDF Regards, Barry

Barry, I do not see anything in the files section labeled "Chain Counter." Could you recheck and upload or email it to me at svbebe"at"gmail.com. Best, Bill s/v BeBe, SM2k, #387

bill, there is also a photo of the manifold posted eric sm 376

I can confirm what Bill reported. I called the US number and was given the same response. Part no longer available. John SM394

I don't think that is correct Bill, I received a reply from the manufacturer who sent me a brochure of the part which I have uploaded in the Files folder "Chain Counter". I have placed an order and

I would also like to replace the forward head holding tank drain pipe and service the seacock. Can the seacock and down pipe be safely removed whilst the boat is in the water. In other words is the

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /SM Brandt-Thomson Washer Tech Manual.pdf