Dear, you have to adjust the steering compass ( Furuno PG-500/700 etc) . You will find the details in downloaded manual. Greetings to all Wolfgang Weber SY Elise Amel 54#162 La Rochelle

Shot in the dark Greg ... could there be a ferrous object lingering near the heading compass? Sent from my iPhone X -- Dean Gillies SV Stella *****,  Amel 54-154

Teun One possibility would be a broad lead Brisbane to waikawa bay marina near picton (10 to 12 days passage ) to clear customs and bio security Sail around Marlborough pelorus sounds then Nelson and

The Bay of Islands in the Far North is a safe and easy place to start. Opua is a port of entry. Cheers, Mike Longcor SV Trilogy SM23 NZ

Everything you need to know is on page 54 of the Online Amel Book, I gave you passwords that do not expire until Oct 22. Here is a snippet of that page, but there is much more: CW Bill Rouse Amel

There is no commercial source, you have to have them made. Any rigger or machine shop should be able to once you show them the problem and the photo. The Amel service group in Martinique does not

A V45 seal is very common and can be stretched to fit over the furler. Google it. Fair Winds Eric Kimberlite Amel Super Maramu #376

Morning, Due to a crucial part going AWOL (and, after ordering it yday from a different country, it is now expected to be available early next week) I have to change my original cruising plan and

Honestly I have no idea Envoyé de mon iPhone

Dear fellow Amel Owners Does anyone know the specification and where to buy 2 " sealing kits " (( maybe V45 protective coupling ?!....) for the main and mizen mast furlers of the Amel 55. I asked

I know that they make these at Caraibe Greement in Martinique. I will ask them if they can ship them and let you know. CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720

Please contact me on my cell for more details. Im in Los Angeles +1310-498-8121 or Whatsapp asc well Gili Lady Gaya A55 #68

Hello everybody How we can remove the fridge? We need access to the expansion valve and the cooling plate? See pictures Any ideas. Thanks for your help. Best regards Hans-Jörg Wildhagen S/Y Wasabi

Hello, we are servicing jib furling system on my Amel. After drilling old rivets we have to replace it with bolts as per attached photo. I have asked Amel if they have on stock. But they do not. Is

Hi Bill, Sorry to say, but it's not the case. Again, in stationary position, when rudder is in "0" position the screen shows spontaneous changes of the rudder position. It can change without any boat

Thank you Bill.

Matt, Here is a link to Furuno NAVpilot 700 711 720 Manual OME72720P https://www.furuno.com/files/Manual/28/upload/OME72720P_NAVpilot700_711_720.pdf CW Bill Rouse Amel Owners Yacht School +1

What you want to replace the car with is the Antal Purpose-Made Outhaul Car for SN, SM, &54 31x21 Track Go to this link to view and download the Amel Book Supplement on this:

I suggest that you use the Plastimo Pump described here: https://preparetocastoff.blogspot.com/p/files-requested-by-amel-yacht-owners_3.html CW Bill Rouse Amel Owners Yacht School +1 832-380-4970

Hello Andreas, We own Hull #72, and have the same winches you do. These winches are Lewmar Wavegrip, and were last manufactured in 1991. Amel must of had a stock of them, as they went on many if not