|
Re: Spanish Customs and Brexit
Joerg,
I think there is a special way of custom declaration when you send a part for repair between the countries ( Non- EU / EU ) and also for sending repaired back to you, so you don´t have to
Joerg,
I think there is a special way of custom declaration when you send a part for repair between the countries ( Non- EU / EU ) and also for sending repaired back to you, so you don´t have to
|
By
Wolfgang Weber
·
#66673
·
|
|
Re: Spanish Customs and Brexit
Similar to Bruno’s suggestion, if you know anyone in Northern Ireland you could sent the panel to them and get them to act as go between, forwarding it to Spain and re forwarding the returned panel
Similar to Bruno’s suggestion, if you know anyone in Northern Ireland you could sent the panel to them and get them to act as go between, forwarding it to Spain and re forwarding the returned panel
|
By
Richie Whyte
·
#66672
·
|
|
Re: A54 Dishwasher replacement
Typically what happens with these things is the circulation pump starts leaking and after a while iy shorts out. Also the heating element can short out when it gets old.
Go to www.klarstein.de to see
Typically what happens with these things is the circulation pump starts leaking and after a while iy shorts out. Also the heating element can short out when it gets old.
Go to www.klarstein.de to see
|
By
Arno Luijten
·
#66671
·
|
|
Re: Starlink -first impressions at Malta
Scott
Standard RV antena like pic without any motors change
José Alegria
A55#003MERIT
josealegr@...
Mobile: + 351 91 866 30 37
Scott
Standard RV antena like pic without any motors change
José Alegria
A55#003MERIT
josealegr@...
Mobile: + 351 91 866 30 37
|
By
Jose Alegria
·
#66670
·
|
|
Re: A54 Dishwasher replacement
Hi Mohammad and Aty,
My Dometic dishwasher couldn’t stop washing cycle, was trying to pump out water non stop. While dismantling it ( not so easy job ) I decided not to fix Dometic and to
Hi Mohammad and Aty,
My Dometic dishwasher couldn’t stop washing cycle, was trying to pump out water non stop. While dismantling it ( not so easy job ) I decided not to fix Dometic and to
|
By
Vladan SV PAME
·
#66669
·
|
|
Re: A54 Dishwasher replacement
We replaced ours with a Candy CDCP 6/E
https://www.tradeinn.com/techinn/en/candy-cdcp-6-dishwasher-6-cutlery/138353584/p
Great little dishwasher that we use at least once daily for the last 4+ years.
We replaced ours with a Candy CDCP 6/E
https://www.tradeinn.com/techinn/en/candy-cdcp-6-dishwasher-6-cutlery/138353584/p
Great little dishwasher that we use at least once daily for the last 4+ years.
|
By
Scott SV Tengah
·
#66668
·
|
|
Re: Starlink -first impressions at Malta
Do you all have the standard antenna or the "in motion" antenna?
I assume none of you paid $10k USD for the maritime version? :)
--
Scott
2007 A54 #69
SV Tengah
http://www.svtengah.com
Do you all have the standard antenna or the "in motion" antenna?
I assume none of you paid $10k USD for the maritime version? :)
--
Scott
2007 A54 #69
SV Tengah
http://www.svtengah.com
|
By
Scott SV Tengah
·
#66667
·
|
|
Re: A54 Dishwasher replacement
Dear Mahammad and Aty,
I have replaced it end 2021 with TEKA Dishwasher LP2 140 White for 452,23 € + 23% Portuguese VAT + shipping cost.
Very happy, much less noisy, more economic and
Dear Mahammad and Aty,
I have replaced it end 2021 with TEKA Dishwasher LP2 140 White for 452,23 € + 23% Portuguese VAT + shipping cost.
Very happy, much less noisy, more economic and
|
By
Alexander Hofmann
·
#66666
·
|
|
A54 Dishwasher replacement
Our Dometic dishwasher turned off in the middle of a wash cycle. All the lights went out and resetting the breaker had no effect. It was at the end of the season and we did not spend much time
Our Dometic dishwasher turned off in the middle of a wash cycle. All the lights went out and resetting the breaker had no effect. It was at the end of the season and we did not spend much time
|
By
Mohammad Shirloo
·
#66665
·
|
|
Re: Hollow Rudder
> On 29/11/2022, at 7:54 PM, Peggy Rotan via groups.io <pjrotan@...> wrote:
> This is Peggy with the Amel SM #36
>
> My boat is out of the water getting some bottom work done. I
> On 29/11/2022, at 7:54 PM, Peggy Rotan via groups.io <pjrotan@...> wrote:
> This is Peggy with the Amel SM #36
>
> My boat is out of the water getting some bottom work done. I
|
By
JOHN HAYES
·
#66664
·
|
|
Re: Hollow Rudder
Regarding the "screw head in the picture" Is that the screw that ultimately leads to a grounding strap? I think in Bill's manual (page 314) regarding rudder packing he talks about sealing that to
Regarding the "screw head in the picture" Is that the screw that ultimately leads to a grounding strap? I think in Bill's manual (page 314) regarding rudder packing he talks about sealing that to
|
By
rossirossix4
·
#66663
·
|
|
Re: Dometic CRX-140
We just replaced our frigo by a Dometic CRX 140 on our SM #194. I had to work out the wooden podest and turn it over, then it fits perfectly and builds up a recipient for the fridge with a small space
We just replaced our frigo by a Dometic CRX 140 on our SM #194. I had to work out the wooden podest and turn it over, then it fits perfectly and builds up a recipient for the fridge with a small space
|
By
Andreas Irion
·
#66662
·
|
|
Re: Dometic CRX-140
We just replaced our galley fridge with a vitrifrigo 130, remote compressor.
Can reuse the existing wooden frame under the old fridge.
Michael Nebo sm251
We just replaced our galley fridge with a vitrifrigo 130, remote compressor.
Can reuse the existing wooden frame under the old fridge.
Michael Nebo sm251
|
By
Michael Winand
·
#66661
·
|
|
Re: Dometic CRX-140
Hi Alan,
Bill’s point is quite valid. The reshuffled galley is the major place where the SM2Ks differ from the older stock. So this would be a problem point.
I won’t be on the boat until next
Hi Alan,
Bill’s point is quite valid. The reshuffled galley is the major place where the SM2Ks differ from the older stock. So this would be a problem point.
I won’t be on the boat until next
|
By
Tilo & Jeannette Peters
·
#66660
·
|
|
Re: Photos of Kimberlites Bowsprit
Hi,
I have been away sorry for the late response.
The hollow SS tubing in the photo is welded to a plate and is bolted down as in the photo attached.
There is a vertical piece of square rod welded
Hi,
I have been away sorry for the late response.
The hollow SS tubing in the photo is welded to a plate and is bolted down as in the photo attached.
There is a vertical piece of square rod welded
|
By
Eric Freedman
·
#66659
·
|
|
Re: Hull paint - color
Hi Herbert, we own a SM #12. The Deck colour ist bright ivory, the hull ad far as we found Out ist White 001 (both from international). I Just Made a small Spot of some White in the hull and was
Hi Herbert, we own a SM #12. The Deck colour ist bright ivory, the hull ad far as we found Out ist White 001 (both from international). I Just Made a small Spot of some White in the hull and was
|
By
Thomas Margraf
·
#66658
·
|
|
Re: Dometic CRX-140
Alan,
You are comparing a SM2k to an older SM. It might be a legitimate comparison, or not. Tilo's fridge is mounted near the stove, yours near the companionway.
Bill
CW Bill Rouse Amel Owners Yacht
Alan,
You are comparing a SM2k to an older SM. It might be a legitimate comparison, or not. Tilo's fridge is mounted near the stove, yours near the companionway.
Bill
CW Bill Rouse Amel Owners Yacht
|
By
CW Bill Rouse
·
#66657
·
|
|
Re: Spanish Customs and Brexit
YESD WE USED ADVANCE YACHT SYSTEMS IN ROMSEY NR SOUTHAMPTON.
Peter Forbes
Carango AMEL 54 035
Lymington UK
07836 209730
YESD WE USED ADVANCE YACHT SYSTEMS IN ROMSEY NR SOUTHAMPTON.
Peter Forbes
Carango AMEL 54 035
Lymington UK
07836 209730
|
By
Peter Forbes
·
#66656
·
|
|
Re: Dometic CRX-140
Hello Jeanette and Tilo,
I'm looking at replacing our frig also.
I'd be interested to see a picture of the Dometic CRX 140 in a Super Maramu
According to the manufacturer the product depth is 620
Hello Jeanette and Tilo,
I'm looking at replacing our frig also.
I'd be interested to see a picture of the Dometic CRX 140 in a Super Maramu
According to the manufacturer the product depth is 620
|
By
Alan Leslie
·
#66655
·
|
|
Re: Hollow Rudder
Hi Peggy, neither you nor John mentioned the drain hole in the bottom of the rudder. It gets all those unaware of the Amel method excited when they see water running or dripping out of the bottom. It
Hi Peggy, neither you nor John mentioned the drain hole in the bottom of the rudder. It gets all those unaware of the Amel method excited when they see water running or dripping out of the bottom. It
|
By
Danny and Yvonne SIMMS
·
#66654
·
|