Hi Eric, My understanding is the interior finish of the fresh water tank / keel stub is simply the same gelcoat that is used everywhere else on the finished surfaces of the boat (exterior hull,

Thank you Alexander. Any modification required to install this unit? Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099

Thanks Scott. Any modifications needed to install? Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099

Thank you Vladan. Looks like you and Arno bought from the same company. Did it fit in the space without any modifications? Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099

Thanks Arno. Will look into it. How did you receive the unit. Did you have it shipped or pickup? Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099

I have the same. It does have tracking motors, but due to the flat antenna technology, it does not have to constantly search in order to keep a signal tracking on a specific focal point. All you have

Hi Peggy. No that is not the drain hole. The hole is in the bottom surface underneath. It is about 1/3 from the front. The hole can get clogged with shell fish and mud and not be obvious to the eye.

Thanks for the suggestions everyone. I'm checking with Advance Yacht Systems whether they can do the work. Cheers Joerg

CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com Bio & References Create your own email signature

Hi Eric, I'm not sure that Vetus still stock the switches--I couldn't find them on their catalog. However, they are available from Herth + Buss, the manufacturers, from their Elparts section. Also on

Hello all, Is this where the drain hole is supposed to be. I have two zinc on the opposite side of the rudder. I am wonder if the drain hole got filled in by the previous owner. Peggy Bearfoot

Hi Amelians, We have found some flaking and cracks in the fresh water tank coating on our SM 158. The coating is coming loose from the polyester in some places. . Can anyone advise what coating to use

Joerg, I think there is a special way of custom declaration when you send a part for repair between the countries ( Non- EU / EU ) and also for sending repaired back to you, so you don´t have to

Similar to Bruno’s suggestion, if you know anyone in Northern Ireland you could sent the panel to them and get them to act as go between, forwarding it to Spain and re forwarding the returned panel

Typically what happens with these things is the circulation pump starts leaking and after a while iy shorts out. Also the heating element can short out when it gets old. Go to www.klarstein.de to see

Scott Standard RV antena like pic without any motors change José Alegria A55#003MERIT josealegr@... Mobile: + 351 91 866 30 37

Hi Mohammad and Aty, My Dometic dishwasher couldn’t stop washing cycle, was trying to pump out water non stop. While dismantling it ( not so easy job ) I decided not to fix Dometic and to

We replaced ours with a Candy CDCP 6/E https://www.tradeinn.com/techinn/en/candy-cdcp-6-dishwasher-6-cutlery/138353584/p Great little dishwasher that we use at least once daily for the last 4+ years.

Do you all have the standard antenna or the "in motion" antenna? I assume none of you paid $10k USD for the maritime version? :) -- Scott 2007 A54 #69 SV Tengah http://www.svtengah.com