Hello to all: To everyone on the Amel forum who has contributed to my Amel education, to the Amel factory team that built such a well conceived and well executed boat, and to Joel who has become my

Gary, I faced the same problem, I even wrote Davis Marine who makes the smaller sizes and they have no idea where to get it. Fair Winds Eric _____ From:

Eric: It has been a couple of years but I last purchased some of the larger size covers from Laurant in Amel Guadeloupe. They were no doubt sent from France. I bought about 20 pieces of each of

Has anyone installed a RayMarine AIS500? If so I have a couple of questions: 1. Did you have any trouble interfacing with your chart plotter, for instance I have a C80 at the helm. 2. Where did you

Mark: I purchased a exhaust elbow/water mixing injector Yanmar PN 129671-13551, for my Yanmar 4JH3-TE (Amel SM2000 Hull # 335, delivered July 2001) from Boatswain's Locker in Costa Mesa CA phone

Both our Yanmar and Onan wet exhaust mixer elbows are near the end of their lives. The prices for the OEM parts seem a bit high, even as boat parts go. Apparently, the previous owner of our boat

Merry Christmas you two, Bill will you send me an email address that I can talk to you in private. Please send to agav8ter (at) yahoo dot com. Thanks. I hope all is well with you and Judy. I

Thanks, Steve, That looks interesting. Cheers, Ian

I have been using first aid tape that you use to hold on gauze bandages. It is available in any pharmacy. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

I have been unable to locate the cloth-like tape Amel wrapped on hoses under worm clamps throughout my SM2K. I've been using electrical tape when replacing it, vaguely worried I may be doing

Ian We encountered the same concerns as we sail in Maine during the summer time and the spurs are too small and zinc repacement is constant. We ordered the following line cutter Shart Shark Cutter and

Hi y'all, We have had Spurs rope cutters on Pen Azen ( SM 302) for ten years. On a couple of occasions we have encountered fairly thick rope and the fixed blade has just snapped off. Spurs

Hi y'all, We have had Spurs rope cutters on Pen Azen ( SM 302) for ten years. On a couple of occasions we have encountered fairly thick rope and the fixed blade has just snapped off. Spurs

Eric, The slit was the width of the sawblade. The material is flexible enough to work with so you just need the one cut. We've had ours on for over a year and they still look fine. We came back

Dave, I was thinking of that, However how long does it hold up in the Caribbean sun? Did you cut a very small slit ? or what size,? What did you seize it with? Fair Winds Eric _____

Available at any hardware store.....PVC pipe I use a table saw to cut a slit. After installing I seize it every 500mm or so.

A couple of years ago we found the larger diameter plastic rigging covers in a chandlery in Le Marin, Martinique. I don't know today if they still have those larger diameters. But Amel-Caraibes

Steve, I store mine in the port cockpit locker all the way forward in the original bag. Next to it I have the chafe gear. I packed it in such a way that the bridle is on top and then I drop in

no where in the Caribbean and in the US, West marine and Defender says no too. I gave up. John "Moon Dog" SM248 To: amelyachtowners@... From: kimberlite@... Date: Thu, 16

Thanks Eric, Based on your earlier accounts and recommendations, I bought a Jordan series drogue before we left on the 2009 Caribbean 1500. Like the life raft, hoping we never have to use it, but