Repairs with new resin to old usually are not very strong whether it is polyester or vinyl ester resin. For structural repairs especially, epoxy is not only stronger, but will adhere far better than

Hi all: Just a general question. Does anybody know what type of fiberglass resin Amel used in building their Super Maramu boats? Is it polyester resin or vinyl ester resin? Secondly, when doing

Hello Kent, Thanks for Your answer and for the congrats. I wrote the Type of engine in my Headline: It is the Perkins M80T, 59Kw.

Hi Mark, I can't tell you how to replace your bow roller but having anchored most of the year for the last eight years and having no grooves in my bow roller I can recommend that whenever you

Eric, that`s what I call a quick response: 11 mins! Yes, of course I have been to the ACE webpage and I read most of the available articles from the coast guard and so on. One article stated, that

I forgot to ask where is your boat located? Fair Winds Eric _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of Martin Komischke Sent:

Martin, There is an Amel 54 at my marina in St Martin. Please write me in about May 1 or 2 and I will have an answer to your question about rigging your Amel. Did you look at the drogue on ACE

Hi Eric,   may name is Martin and I am the owner of Amel 54 #149 "CHIARA". Full of respect I have read your article in Ocean Navigator. Amazing and congratulations on your excellent semanship! I

The primary bow roller on our Super Maramu 2000 has pretty large grooves worn into it and we would like to replace it. The spindle appears to welded into the pulpit on both sides. Does anyone have

Thanks. Regards Richard Piller "Yacht Brokerage Service above and beyond the expected" Walczak Yacht Brokerage Service LLC 2 Compromise St Annapolis, MD 21401 Cell 603 767

Richard, "Mainsheet Horse" = "Mainsheet Track" Hope this helps. Bill s/v BeBe, SM2k, #387 Currently Marmaris, Turkey

Hi please explain what you mean by "horse tracks" I'm not familiar with that term. Thanks PS I'm not able to down load photos from present position Regards Richard Piller "Yacht Brokerage Service

Please anyone has any idea?

Have you tried www.mailasail.com ? I plan to use it during my trip from La Rochelle to Greece Regards Dimitris From:

I am getting tired of buying a 500 minute sim chip and not using the time. I then have to buy another chip so my unused minutes won't expire. Does anyone have a good source or a better idea? Fair

Congratulations, Martin and Stenella. What engine do you have? As a general rule the diesels are meant to run at 60 to 70 % of max rpm under load. If you have a turbo charger you'll want to be able

Hallo, I´m a new owner of the SM #34. The ship is in the yard to get a refit. I want to mount the three-blade- turning-propeller from Gori. But I don´t know the correct size of the original

Amazing. Thank you Martin it was worth reading it. Regards Dimitris From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of luvkante Sent: Friday, April