A much kinder approach to this, rather than sledgehammers and jury-rigged blocking, and what any machine shop professional would highly recommend, is to simply remove the entire boom and use a

Hi Bill, when I purchased Crusader (2) In 2003 I asked Olivier for a spare tray. He said that trays were no longer available, but gave me his last spare which I have now used. In my double sink

Thank you Lars and Eric for your input. I did change the solenoid some time ago. There was a temporary improvement but not a complete solution. I will take the stop button apart when I can find time

Thank you Lars and Eric for your input. I did change the solenoid some time ago. There was a temporary improvement but not a complete solution. I will take the stop button apart when I can find time

I am thinking of getting some Kato davits for Popeye Maramu #91. Kato have replied to my inquiry stating they have not had Kato davits installed on a Maramu so do not have instalation details on

When we replaced these sheets we made them two metres longer as the original lenth was inadequate when the other sheet was poled out. Following that terrble tale of someones arm being wrenched off I

Hello Tom, Having just been through this problem I have a few pointers. If a bolt has sheared off take the box to a machine shop and get them to drill it out and insert a Helicoil which will be better

What I meant to describe is the plastic insert trey for the sink...we use it to stack dishes to dry. It is labeled with "CER MAT" with a heart between the "CER" and the "MAT." Bill BeBe, #387

Does anyone know where we can buy a replacement for the plastic tray for the galley sink? It has "CER♡MAT" on each end of the tray. Best, Bill BeBe, SM2k, #387 Crete, Greek Islands

If you know where it is in SXM I will be there next week and take a look at it for you. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From:

Does anyone know this boat? http://www.yachtworld.com/boats/1981/Amel-Maramu-Ketch-2116025/Caribbean/St.-Maarten-St.-Martin Any comments about this 1981 Maramu? Thanks, Russ

I think I was reading too many of the recent posts on this site, but since I bought the boat a year ago and hadn't serviced the gearbox I decided this relatively cooler weekend (in Annapolis) was just

After sending my Icom model 802 back and forth to Icom we finally received it back with it working 100 percent at the factory. When installed it still did not work, so we changed the antenna lead

I was so happy to receive the new "optional exhaust elbow for my Yanmar 100 hp engine last week. It is a beautiful casting probably weighing 12 pounds. Unfortunately, when Amel turned the intercooler

Hi Paul & Sue, Regarding your 2nd question and the vibration, I've replaced the mounts (happened to be in LaRochelle at the time so got them from Amel) and, although I've got a Santorin, I believe

Try Vetus Marine. I believe they are called hydro dampers, type mitsteun. They are in the catalog, page 127 next to the motor mounts. They have a distributor in North Carolina. John "Moon Dog" SM

Hi Ric, I'm sure Richard can help out and there are many posts on this DB about changing the lip seals on these "C" drives. Coincidentally, I doing mine today and the top seal is also leaking. The

Hi Paul and Sue, I think they are standard units made by Silentbloc, try their website for more info and local agents. Regards, Anne and John, Bali Hai, SM319

Ric I am in Annapolis give me a call. Regards Richard Piller Cell 603 767 5330 "brokerage beyond your expectations" [Non-text portions of this message have been removed]

I have a 1990 Santorin with a perkins 50. The transfer case is getting seawater mixing with the oil resevoir and now is leaking at the seal near the bilge. I cant read who makes it in ends with