|
Re: bow locker water.
Bill beat me to the punch with mentioning the hawse pipe as a source of water ingress. The hawse pipe on my boat (Hull # 335) had chaffed and corroded through at the ceiling of the bow locker. The
Bill beat me to the punch with mentioning the hawse pipe as a source of water ingress. The hawse pipe on my boat (Hull # 335) had chaffed and corroded through at the ceiling of the bow locker. The
|
By
Gary Silver
·
#46405
·
|
|
New file uploaded to main@AmelYachtOwners.groups.io
Hello,
This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group.
File: Bow Thruster Height and Cable Adustment
Hello,
This email message is a notification to let you know that a file has been uploaded to the Files area of the main@AmelYachtOwners.groups.io group.
File: Bow Thruster Height and Cable Adustment
|
By
main@AmelYachtOwners.groups.io Notification <main+notification@...>
·
#46404
·
|
|
Re: Volvo TMD22 Exhaust Elbow
Mark,
What you bought on ebay is the same company that I mentioned to Ian. They started as a very small company, but had huge success with Cast Stainless Steel. You and I bought the Yanmar for about
Mark,
What you bought on ebay is the same company that I mentioned to Ian. They started as a very small company, but had huge success with Cast Stainless Steel. You and I bought the Yanmar for about
|
By
CW Bill Rouse
·
#46403
·
|
|
Re: Volvo TMD22 Exhaust Elbow
Ian,
You may want tospend a little bit of time searching eBay. I have Yanmar and found a stainlesssteel elbow on eBay that has worked perfectly. Good luck with the hunt.
With bestregards,
Ian,
You may want tospend a little bit of time searching eBay. I have Yanmar and found a stainlesssteel elbow on eBay that has worked perfectly. Good luck with the hunt.
With bestregards,
|
By
Mark Erdos
·
#46402
·
|
|
Re: Flag etiquette
I belong to the Royal Welsh Yacht Club and fly a blue ensign. It is perfectly fine to fly it from the stern.
It makes life easier to comply with British flag etiquette as I have to take it in at
I belong to the Royal Welsh Yacht Club and fly a blue ensign. It is perfectly fine to fly it from the stern.
It makes life easier to comply with British flag etiquette as I have to take it in at
|
By
Ian Park
·
#46401
·
|
|
Re: Volvo TMD22 Exhaust Elbow
Thx Craig, will check it out.
Ian & Margaret
S/V Loca Lola II
SM153
Exumas, Bahamas
Thx Craig, will check it out.
Ian & Margaret
S/V Loca Lola II
SM153
Exumas, Bahamas
|
By
Ian Townsend
·
#46400
·
|
|
Re: Volvo TMD22 Exhaust Elbow
Grrreat! Merci beaucoup Bill.
Ian & Margaret
S/V Loca Lola II
SM153
Exumas, Bahamas
Grrreat! Merci beaucoup Bill.
Ian & Margaret
S/V Loca Lola II
SM153
Exumas, Bahamas
|
By
Ian Townsend
·
#46399
·
|
|
Re: Flag etiquette
Dear Joerg,
Yes on Carango [Amel 54] I flew the ensign at the stern (but not on open Ocean) only anchored or on coastal sailing. And the Burgee on a huge in my case 1.5 meter pole which took the
Dear Joerg,
Yes on Carango [Amel 54] I flew the ensign at the stern (but not on open Ocean) only anchored or on coastal sailing. And the Burgee on a huge in my case 1.5 meter pole which took the
|
By
Peter Forbes
·
#46398
·
|
|
Re: Volvo TMD22 Exhaust Elbow
Ian,
Parts4Engines lists this at $270 in Aluminum (no VAT if shipped to US). Suspect custom SS will be $$. You might also try Trans Atlantic Diesel for a Perkins M80T.
Craig, SN68
Ian,
Parts4Engines lists this at $270 in Aluminum (no VAT if shipped to US). Suspect custom SS will be $$. You might also try Trans Atlantic Diesel for a Perkins M80T.
Craig, SN68
|
By
Craig Briggs
·
#46397
·
|
|
Re: Volvo TMD22 Exhaust Elbow
Ian,
HDI is a "Yacht School Preferred Vendor" and makes One-Piece Casted (not machined) Stainless Steel Exhaust Elbows. Their "AD" model is what I believe you want. Their price is $455 less your Yacht
Ian,
HDI is a "Yacht School Preferred Vendor" and makes One-Piece Casted (not machined) Stainless Steel Exhaust Elbows. Their "AD" model is what I believe you want. Their price is $455 less your Yacht
|
By
CW Bill Rouse
·
#46396
·
|
|
Volvo TMD22 Exhaust Elbow
I want to replace the exhaust elbow on my Volvo TMD22. As usual, Volvo OEM price is very high. $1,050USD. There is an aftermarket supplier in the U.K. (Parts4Engines) listing a SS elbow for $500. Has
I want to replace the exhaust elbow on my Volvo TMD22. As usual, Volvo OEM price is very high. $1,050USD. There is an aftermarket supplier in the U.K. (Parts4Engines) listing a SS elbow for $500. Has
|
By
Ian Townsend
·
#46395
·
Edited
|
|
Re: Flag etiquette
Very helpful, Peter. So at anchor I must carry the ensign in the standard position for any Amel: at the aft rail. But while underway, I can carry it either in the same position or, alternatively, at
Very helpful, Peter. So at anchor I must carry the ensign in the standard position for any Amel: at the aft rail. But while underway, I can carry it either in the same position or, alternatively, at
|
By
Joerg Esdorn
·
#46394
·
|
|
Re: BOW THRUSTER SANTORIN OIL
Bernd,
Just fill it until you see the oil. Could be about the 3/10ths liter Bill notes. Btw, I usually hang mine upside down overnight to thoroughly drain the old oil.
Craig SN68 Sangaris
Bernd,
Just fill it until you see the oil. Could be about the 3/10ths liter Bill notes. Btw, I usually hang mine upside down overnight to thoroughly drain the old oil.
Craig SN68 Sangaris
|
By
Craig Briggs
·
#46392
·
|
|
Re: Flag etiquette
Great point, Davi. In addition to flying a courtesy flag, we always made it a point to pick up an inexpensive country flag on a stick at a local souvenir shop when we entered a new country and have it
Great point, Davi. In addition to flying a courtesy flag, we always made it a point to pick up an inexpensive country flag on a stick at a local souvenir shop when we entered a new country and have it
|
By
Craig Briggs
·
#46391
·
|
|
Re: Flag etiquette
I attach herewith a copy of the rules.
I think it looks as if rule 33 c applies. ILLUSTRATION 4A - the centre illustration.
Burgee should be at the top of the mast!
So for any Amel ketch it
I attach herewith a copy of the rules.
I think it looks as if rule 33 c applies. ILLUSTRATION 4A - the centre illustration.
Burgee should be at the top of the mast!
So for any Amel ketch it
|
By
Peter Forbes
·
#46390
·
|
|
Re: Flag etiquette
Peter,
I'm sure the RYS would call it " dress overall" !
Ian & Judy, Pen Azen, SM 302 Greece
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Peter Forbes
Peter,
I'm sure the RYS would call it " dress overall" !
Ian & Judy, Pen Azen, SM 302 Greece
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Peter Forbes
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#46389
·
|
|
Re: Flag etiquette
I will get out my copy of the ROYAL YACH SQUADRON instructions on this and send you a photocopy on this and how to ‘dress all over’ - should be able to do that on Friday.
best wishes
Peter
Peter
I will get out my copy of the ROYAL YACH SQUADRON instructions on this and send you a photocopy on this and how to ‘dress all over’ - should be able to do that on Friday.
best wishes
Peter
Peter
|
By
Peter Forbes
·
#46388
·
|
|
Re: Gaining Access to the upright Freezer in the Galley
Porter,
Yes I did that and I’m no expert craftsman. I can’t remember exactly how but it is all quite clear as you progress. I seem to remember that you do have to remove the cross bar of wood at
Porter,
Yes I did that and I’m no expert craftsman. I can’t remember exactly how but it is all quite clear as you progress. I seem to remember that you do have to remove the cross bar of wood at
|
By
Peter Forbes
·
#46387
·
|
|
Re: Flag etiquette
I don't know much about where to fly my own flag (it's off the stern on the Amel pole, about an inch per foot of boat as is about right, and in any case I don't care much as it is a convenience
I don't know much about where to fly my own flag (it's off the stern on the Amel pole, about an inch per foot of boat as is about right, and in any case I don't care much as it is a convenience
|
By
Davi Rozgonyi
·
#46386
·
|
|
Gaining Access to the upright Freezer in the Galley
Hello gents (and ladies)
I am wondering if anyone on the A-54 has been able to get access to the guts of the upright fridge/freezer in the galley. I think we’ve had a gas leak and need to re-braze
Hello gents (and ladies)
I am wondering if anyone on the A-54 has been able to get access to the guts of the upright fridge/freezer in the galley. I think we’ve had a gas leak and need to re-braze
|
By
Porter McRoberts
·
#46385
·
|