Hello friends, Seems , that I am really a unlucky guy and CLIMMA is not as bad as my experience. Thank you ALL for your willingness to share YOUR experience. Now I have to reflect........ Fair

Thanks Pat! It does always help to check the Perkins parts. When available, and a match, they are almost always cheaper... Bill Kinney SM160, Harmonie Annapolis, MD, USA

Thanks Bill R., It does look like all the VDO temperatures sensors are electrically identical, and all I have to do is be sure the threads match the thermostat housing. Interestingly, the 1/2"MPT

Bill Kinney, I think what you need is a VDO Isolated Ground sensor. I believe that almost any diesel engine isolated ground sensor will work. Take a look at this:

Colin, In the following, I assume that you have an unmodified Amel OEM 66b (standard) or 88b (optional) fresh water pump. Square D is worldwide and commonly used on water-well pumps throughout the

Bill, just noticed that they have it for the TMD22 as well ,same price. I believe they ship from UK , but I still received my parts within a week. Pat SM#123

Bill, Parts4Engines have the two wire sender for the M80T , should be the same , for $16.68 . Pat SM Shenanigans

I’m in contact with a 3-D printing company in Annapolis. I’ll send one to them as soon as I get back to the boat in 2 weeks, and let you know what they say. Kent Robertson S/V

Does anyone have a part number/source for the two wire temperature sensor on the TMD22? Not the high temperature alarm switch, I need the sender for the temperature gauge? The "standard" Volvo part

Hello Martin; It is unfortunate that you are having so many issues with your Climma. Ours also has been working without any issues in the past 3 years that we have owned her. Respectfully; Mohammad

Peter: See this link to the photos section of this forum for details and specifications on this

Hello Peter, I just did this job a couple of months ago with the boat in the water. It was not as difficult or unpleasant as I had expected. The valve you need can be purchased on Amazon

Looks like a job for somebody with a 3D printer... Bill Kinney SM160, Harmonie Annapolis, MD, USA

Last I heard (18 months ago) there were back in stock at Amel. That's when we got ours. I had heard described people who had replacements made of painted wood. A not unreasonable alternative.

You should also check the “sensor” part of the pressure switch. Unscrew it from the rest of the pump and look down the short pipe where the water presses on the switch. We replaced ours but I

Hi Miles, and Hi to Carol, May the Fourth be with you all! I will look into the possibility of having some made. I will get back to the group when I find something out. Kent S/V Kristy SM 243

After 4 years, the stern bumper on my SM was lost at sea. She was in rough shape and lived a long life. Wondering if anyone had one they wanted to get rid of or had any luck getting a new one from

Greetings all, Last weekend we needed to close the holding tanks for an overnight anchorage close to shore, and the forward tank valve would not budge. After multiple days of penetrating fluid

Maybe it’s the newer units on Trippin 2008 54 #101 no problem with heat or AC we are the 3rd owners original equipment So sorry for your difficulties Courtney

Martin, I can relate my experience and opinion on the air conditioning on my 54. I am not interested in entering into a debate but offer my opinion only. Four years ago I replaced the