Fred I had to do it for real this season. I just picked up a piece of 10mm rope lying in the locker, sat down in front of the genoa furler and popped it in place and pulled. I didn’t have too long a

Bill K, Am I understanding correctly that your motor/manual claims it is safe to operate your engine up to 5150 RPM in neutral at wide open throttle? I was just playing around with mine the other

Hi Stefano, I have twin Racors and have used both 5 and 10 micron without a problem. Engineers have told me that 5 is unnecessary and would put a strain on the pump but I think other Amel users have

Thanks, Dieter, I haven't see this gadget before--I had always assumed that a tacho would be accurate. My mechanic comes soon. His first thoughts are that it could be the fuel pump rather than the

Dear SM owners, my lady is hull 185 with Volvo engine. She was born in 1997 with single fuel filter and I will upgrade with a double Racor filter. I received different offer, different option like

Hi Fred, this is the rope you use to lift the outboard engine from its support on the guard rail: Run both shackled ends of the rope through the open pulleys at mizzen boom end, and tie the loop of

Bill, You are correct.We purchased them from Amel. They are not always in stock. I had to check a fewtimes. Very easy to remove the old ones and replace. With bestregards, Mark

Hi Fred, That's the factory supplied line for hoisting your dinghy outboard. The spliced eye attaches to the lifting halyard on the port side of the mizzen. Then the two legs with the shackles go over

Seckin, Try SAV"at"amel.fr. I remember someone recently saying that they bought some from Amel. Best, CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School http://www.amelschool.com 720

Dear All; I wonder how can I find the AMEL font in the side of mu supermaramu? I need to renew the old stickers. Thanks in advance Seckin Barlas S/Y Hayat

Hi, here is what I did in order to control the installed tachometer: I bought this instrument https://www.conrad.de/de/drehzahlmesser-voltcraft-dt-10l-werksstandard-ohne-zertifikat-122624.html

Hi, Amel smartness has no limit ! I would like to open a new chapter of this game for our experts if they can help at identifying this rope. There are 2 shackles and quite special design so I

Hi Mark, I did it recently and after sales at Amel were really cooperative. You can write at sav(at)amel.com and ask for Maud but tell her that Maxime did the purchasing for us and is updated about

Thanks , Bill , It’s a brand new tacho , 300 hours . ( maybe made in China ! ) Ian

Duane My S2G is only getting "orders"... or in NMEA terms, it is only a listener, not a talker. Best - Daniel

Ian and Judy, I am really glad to hear that you feel you are making progress with solving your engine problem. I think that we are certainly lucky to have knowledgeable and helpful people like

Hi Mark, I believe that David Vogle on Perigee just replaced his. So you might want to reach out to him. It looked like the model you posted. He did have the luxury of having his stick down for new

According to my shop manual the maximum no-load speed is coded into the "setting code" on the injection pump. The manual says: The setting code on my engine is 2643H058BE/1/5150 which would

Eric, Believe it or not, the ball bearing in the Antal Main Boom Car are 1/4 inch (0.25 inch) in OD. Quite odd for an Italian made part! I had to replace the shackle on the car due to a crack so