hi Teun, Sorry for the late reply, just returned from a trip to Ireland (by plane). In March/April, I had Philippe LaConte and Gaetan at Caraibe Marine in Martinique replace all of my standing

Tha standard Vetus coupling will not work. Amel Machines it for our engines. You must purchase it from Amel. Fair Winds Eric Kimberlite Amel Super Maramu #376

Thanks Marian and Bill for good info re jib furling motor brushes. When back on the boat in August, will take more pics and continue research. Again, thanks all, Eric-- Eric C. Lichty ECLMARINE,

Tony page 236 of the Amel Book. Here is a snippet from that page: CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550

Thanks Bill, As not to bother the forum I will keep you informed via direct Emails on the options we are looking at (f.e: getting the OEM motor directly from Italian manufacturer; trying to find a

Bill, motor mounts on order. What are the modifications made by Amel? Tony

The coupler is modified by Amel, but a local machine shop could modify. It is probably cheaper and better to order from Amel. You'll want to change the 6 motor mounts at the same time. Best, CW Bill

Hi All: I’ve been following this conversation with great interest as I just replaced our membranes and had an issue with the end caps. They were in reasonable shape, but the caps on the non-product

Hi all, I'm looking for some guidance on a replacement Vetus coupler between transmission and C-Drive on SM#443. I am not looking just for the rubber donuts but a complete replacement of the coupler,

Hi Daniel, Take a look at the Boomkicker (https://www.boomkicker.com/). The Boomkicker is advertised for boats up to 38' but they are addressing specifically sloops. I installed their set for a 38'

I have a 12v System. Furlermotor (Same as yours on your Picture) and Lofrans Tigres motor are the same. You need the 24v Motor i think. Both are available. My Contact to Lofrans was +39 039 2001973.

Hello Amelians When i bought the Mango (1980), the mainsail topping lift was in a fixed position. It is still currently fixed. I could run a line through the boom and shackle it off to provide boom

Stefan, Thanks, but that company no longer has any stock CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550 www.AmelOwnersYachtSchool.com

Hi Bill, I may have send last time you asked this: http://www.jwarfieldelectric.com/shop/tf-15-drive-motor/ Nidec is a good stock holding distributor of LS too. Apologies if this info proves to be in

Teun. I Bcc'd David Dickmann who had Profurl or Facnor Furlers installed without the "needed" change of foils. although, I believe that for another reason the staysail foil was changed. He had this

Eric, Lofrans uses many different motors. Do you know which is the same as the genoa motor? CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas

Thanks Teun, I am with you when it comes to the prices charged for these furlers. It is outrageous, you have every reason to be angry. I am happy that I have the MEJ’s rather than the EJF’s. At

Am 2022-07-27 02:47, schrieb ERIC LICHTY & ROBYN ATKINSON:Hello Eric, i had similar Problems. These are old Bosch-Motors that are not supported any more. But Lofrans produces these motors now. for

Hi Nick, Below in blue Best Regards Teun July 28, 202220:32:00 From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>On Behalf Of Nick Newington via groups.io Sent:

Hi Teun, Understood. Sorry you must be bored with the usage question. I want mine to keep dry. Where do you think the water is getting in? The cable entry? The winch handle entry? The connection