A fellow Amel owner here in GA loaned me one of his spare sensor and bingo! The sensor was the problem and now I'm looking for replacements. Maud on Friday said she would let me know on Monday if

JAMES, Capacitors are generic items and there is no reason to buy them from Climma. Check capacitors ratings. It should be written on the capacitors. Order online in any electronics supply

I also just bought a Clima 12 there. Amazing price. And great service. Porter Excuse the errors. Sent from my IPhone Www.fouribis.com

That is also where I bought mine. Sincerely, Alexandre --------------------------------------------

I installed an Aquabase watermaker in the engine room. The pump went on a small platform besides the battery compartment and the main unit is wall mounted at the port side of the engine room as far

In the USA Coastal Climate Control info@... Fair Winds Eric Kimberlite Amel Super Maramu #376

Hello everyone. Can anyone recommend a source for replacement capacitors for the Climma Compact 9 AC units on the SM2000? Thanks! James Soteria SM2000 #347

Thanks all for your various advice. I have the unit reassembled. As my milling machine is in Dublin I used my timber thicknesser, which I have here in France. I removed about 1.3mm and this gave

Hi there I have recently ordered a schenka watermaker. It comes in two parts. The pump and the Reverse Osmosis unit. The pump needs to be <2m from the skin fitting and the RO unit closeish and lowish

Sorry, but my last response was a mistake! I should not have pressed the send button. It seems I‘m getting too old for a fast reply. All the best Dieter Sharki #135 Fal-lera Von meinem iPhone

Sehr geehrter Herr Ertl, Vielen Dank für die Antwort, damit kann ich was anfangen. Und noch ein schönes Restwochenende. Mit freundlichen Grüßen Busch Von meinem iPhone gesendet Am 03.02.2018 um

Rob, Take a look at UHMW (ultra high molecular weight polyethylene). It is readily available and easy to work. It is commonly used for sliding applications industrially. One of its fairly rigorous

Dan, Thanks for the informative reply. I had tried to upload a spreadsheet with our SG readings in it, but Yahoo was acting up. I tried again in this reply, but it won't upload the attachment. The

Hi Duane, I also have the DEKA group 31 Marine Master batteries (DC31DT) , installed December 2016. I am not an expert, but can only relate my specific experience. After 6 mos on the hard in Trinidad

Thanks Eric, As often is the case you have a good suggestion. Delrin looks like a good suggestion. Nylon certainly appears not to be a good choice . The problem is probably aggravated by long

I had a similar problem with the bearings in the rudder shaft of my Tartan 37. I had new bearings made out of delrin and had no further problems , after sailing her over 15,000 miles. Fair

Thanks Hank, Yes you're right all the technical papers that I've found show equilibrium for the most common Nylons i.e. Nylon 6, Nylon 66 and Nylon 610 at 50%/60% humidity. The equilibrium is achieved

Yes, it is. Bill Kinney SM160, Harmonie Great Abaco Is, Bahamas

Nylon swells a little as it absorbs moisture, maybe a different kind of plastic like PE (poly ethylene) or better still HD (high density) PE would be better?

Hi Paul, It's hard to know what's Jonnuck in the advice from Périgny these days. So, if you wish, I'll ask when I'm up there tomorrow, repairing the passerelle. As an example nobody could advise