|
Amel 54007: Gear Box Part Number
Dear All
The gearbox of the boom on my Amel 54 is broken. Can anyone provide me with the part and fabrication numbers?
Thank you very much
Kurt and Junita
SY Hemera
Flag Malta
MMSI 215000349
Current
Dear All
The gearbox of the boom on my Amel 54 is broken. Can anyone provide me with the part and fabrication numbers?
Thank you very much
Kurt and Junita
SY Hemera
Flag Malta
MMSI 215000349
Current
|
By
kurt.wetzel@...
·
#39988
·
|
|
Re: Two questions
In the NMEA 2000 scheme there is a DRAIN wire and a SHIELD.
The recommendation is that both should be connected to GROUND at ONE POINT ONLY.
Problems have been caused it seems by earth loops where the
In the NMEA 2000 scheme there is a DRAIN wire and a SHIELD.
The recommendation is that both should be connected to GROUND at ONE POINT ONLY.
Problems have been caused it seems by earth loops where the
|
By
Alan Leslie
·
#39987
·
|
|
Re: Two questions
Hi Paul, we changed all electronics to raymarine 4 years ago. I removed the ground after having strange behaviour of the system, is running fine now since 4 years without ground. Was in contact with
Hi Paul, we changed all electronics to raymarine 4 years ago. I removed the ground after having strange behaviour of the system, is running fine now since 4 years without ground. Was in contact with
|
By
Herbert Lackner
·
#39986
·
|
|
Re: [Amel Yacht Owners] Two questions
Thank you for confirming 12v
Paul
Thank you for confirming 12v
Paul
|
By
Paul Osterberg
·
#39985
·
|
|
Re: [Amel Yacht Owners] Two questions
Hi Paul,
All Raymarine/Autohelm drive clutches are 12v. I’m guessing they give you the 12/24 option on the course computer in case you are using a non Ray drive.
Regards,
Steve Davis
Aloha SM
Hi Paul,
All Raymarine/Autohelm drive clutches are 12v. I’m guessing they give you the 12/24 option on the course computer in case you are using a non Ray drive.
Regards,
Steve Davis
Aloha SM
|
By
Stephen Davis
·
#39984
·
|
|
Two questions
We we are in the process of substituting the old B&G instruments with Raymarine instruments.
The new NMEA 2000 backbone system should be grounded. You who have NMEA 2000 how did you ground your
We we are in the process of substituting the old B&G instruments with Raymarine instruments.
The new NMEA 2000 backbone system should be grounded. You who have NMEA 2000 how did you ground your
|
By
Paul Osterberg
·
#39983
·
|
|
Re: [Amel Yacht Owners] Re: Wood trim around Vee berth windows
Hi Kent,
I used a high quality single pot spar varnish to do those trims around the overhead hatches. Looks good and matches the original.
Regards
Danny
SM 299 Ocean Pearl
Hi Kent,
I used a high quality single pot spar varnish to do those trims around the overhead hatches. Looks good and matches the original.
Regards
Danny
SM 299 Ocean Pearl
|
By
Danny and Yvonne SIMMS
·
#39982
·
|
|
Re: Wood trim around Vee berth windows
I finally got the wood trim off of the cabin sides around the porch lights. They were just stuck with copious amounts of what appears to be clear silicone. I am in the process of taking all of the old
I finally got the wood trim off of the cabin sides around the porch lights. They were just stuck with copious amounts of what appears to be clear silicone. I am in the process of taking all of the old
|
By
karkauai
·
#39981
·
|
|
Re: [Amel Yacht Owners] SM 2000 hull 283 delamination on deck
Hi Joel
Thank you for your prompt reply and guidance.
There are very few Amels in NZ. I don't think the Surveyor had ever seen an Amel before.......
In this case, I've learnt that it's a bit more
Hi Joel
Thank you for your prompt reply and guidance.
There are very few Amels in NZ. I don't think the Surveyor had ever seen an Amel before.......
In this case, I've learnt that it's a bit more
|
By
johnericmorton@...
·
#39980
·
|
|
Re: [Amel Yacht Owners] SM 2000 hull 283 delamination on deck
Hello Mr. Morton
Were you able to ascertain if the surveyor has surveyed other Amel boats or was this his first Amel inspection? I suspect the later.
I have sold hundreds of second hand Amels and I
Hello Mr. Morton
Were you able to ascertain if the surveyor has surveyed other Amel boats or was this his first Amel inspection? I suspect the later.
I have sold hundreds of second hand Amels and I
|
By
amelforme
·
#39979
·
|
|
Re: [Amel Yacht Owners] SM 2000 hull 283 delamination on deck
Thank you
From: "Joel Potter jfpottercys@... [amelyachtowners]"
To: amelyachtowners@...
Sent: Friday, 1 June 2018 9:10 AM
Subject: Re: [Amel Yacht Owners] SM 2000 hull 283 delamination
Thank you
From: "Joel Potter jfpottercys@... [amelyachtowners]"
To: amelyachtowners@...
Sent: Friday, 1 June 2018 9:10 AM
Subject: Re: [Amel Yacht Owners] SM 2000 hull 283 delamination
|
By
Alin Misescu
·
#39978
·
|
|
Re: [Amel Yacht Owners] SM 2000 hull 283 delamination on deck
Hello and good luck with your Amel hunting. I sold that boat to it’s first owner who is a very dear friend. We were very discerning in the original outfitting.
I also sold it to its second owner
Hello and good luck with your Amel hunting. I sold that boat to it’s first owner who is a very dear friend. We were very discerning in the original outfitting.
I also sold it to its second owner
|
By
amelforme
·
#39977
·
|
|
Re: [Amel Yacht Owners] SM 2000 hull 283 delamination on deck
Hi Alin and Amel Owners
Just to clarify for other Amel Yacht Owners. We are selling Wanderer after six great years of proud ownership in NZ. When the sale goes through we plan to buy an Amel boat in
Hi Alin and Amel Owners
Just to clarify for other Amel Yacht Owners. We are selling Wanderer after six great years of proud ownership in NZ. When the sale goes through we plan to buy an Amel boat in
|
By
johnericmorton@...
·
#39976
·
|
|
Re: [Amel Yacht Owners] SM 2000 hull 283 delamination on deck
Hi. No she does not have a staysail. I will come back with a picture.
Thank you.
Hi. No she does not have a staysail. I will come back with a picture.
Thank you.
|
By
Alin Misescu
·
#39975
·
|
|
Re: [Amel Yacht Owners] SM 2000 hull 283 delamination on deck
Got confused with the vessel name! Thought Duane was selling his.
Alin, the best would be to take pictures showing the exact location.
Does this SM2K has (or had) a staysail?
Hope the final survey
Got confused with the vessel name! Thought Duane was selling his.
Alin, the best would be to take pictures showing the exact location.
Does this SM2K has (or had) a staysail?
Hope the final survey
|
By
Alexandre Uster von Baar
·
#39974
·
|
|
SM 2000 hull 283 delamination on deck
Hi everyone. This is my very first post here.
I am buying (hopefully) a SM hull 283, Wanderer in NZ. The surveyor found delamination in few spots on deck. 4 areas ranging from 10 to 20 square CM.
Hi everyone. This is my very first post here.
I am buying (hopefully) a SM hull 283, Wanderer in NZ. The surveyor found delamination in few spots on deck. 4 areas ranging from 10 to 20 square CM.
|
By
Alin Misescu
·
#39973
·
|
|
Re: [Amel Yacht Owners] Re: Travel on the US East Coast
By
Brent Cameron
·
#39972
·
|
|
Re: [Amel Yacht Owners] Re: Travel on the US East Coast
Thanks for taking this on Pat!
Duane
Thanks for taking this on Pat!
Duane
|
By
sailor63109@...
·
#39971
·
|
|
Chesapeake Rendezvous
I think we need to set a date for the rendezvous very soon , so plans can be made. If my wife was home I could give you the number interested to date,she is keeping the list. It is quite a few. So I
I think we need to set a date for the rendezvous very soon , so plans can be made. If my wife was home I could give you the number interested to date,she is keeping the list. It is quite a few. So I
|
By
Patrick McAneny
·
#39970
·
|
|
Re: [Amel Yacht Owners] Re: Travel on the US East Coast
Duane, I was just talking about that with my wife , Diane has a spread sheet with everyone and their available dates and intends to determine a date that appears best for most. I told her I wanted to
Duane, I was just talking about that with my wife , Diane has a spread sheet with everyone and their available dates and intends to determine a date that appears best for most. I told her I wanted to
|
By
Patrick McAneny
·
#39969
·
|