|
Re: How much anchor chain?
Bill,
I am writing this to clarify something in your recent post about anchor scope. I am sure you know this, but there wasn't enough detail in your post that newbies will certainly need.
10 meters
Bill,
I am writing this to clarify something in your recent post about anchor scope. I am sure you know this, but there wasn't enough detail in your post that newbies will certainly need.
10 meters
|
By
yahoogroups@...
·
#38701
·
|
|
Re: 'Cristec Devolteur'
Hello Woody,
this was a special request from the new owner. He wanted to charge his batteries with voltage up to 32V, but did not want to feed his appliances with 32V (while charging), so, this DC/DC
Hello Woody,
this was a special request from the new owner. He wanted to charge his batteries with voltage up to 32V, but did not want to feed his appliances with 32V (while charging), so, this DC/DC
|
By
Olivier Beaute
·
#38700
·
|
|
Re: [Amel Yacht Owners] Re: How much anchor chain?
thanks very much for the swift responses to this question
I agree 100m chain would be my preference.....
I reread Beth Leonaids Blue Water Cruising last night - the section on anchoring
Their 40ft
thanks very much for the swift responses to this question
I agree 100m chain would be my preference.....
I reread Beth Leonaids Blue Water Cruising last night - the section on anchoring
Their 40ft
|
By
smiles bernard
·
#38699
·
|
|
Re: [Amel Yacht Owners] Bowthruster spinning
Oops! I’m bad. Too much time in the sun latey.
With bestregards,
Mark
Skipper
Sailing Vessel- Cream Puff
www.creampuff.us
From:amelyachtowners@... [mailto:amelyachtowners@...]
Oops! I’m bad. Too much time in the sun latey.
With bestregards,
Mark
Skipper
Sailing Vessel- Cream Puff
www.creampuff.us
From:amelyachtowners@... [mailto:amelyachtowners@...]
|
By
Mark Erdos
·
#38698
·
|
|
Re: [Amel Yacht Owners] Re: How much anchor chain?
I agree Alan
Danny
By
Danny and Yvonne SIMMS
·
#38697
·
|
|
Re: [Amel Yacht Owners] Re: How much anchor chain?
H Miles,
We have 100m of 10mm chain and 100 meters of rode attached.. Thinking of priorities when you are anchored on a sudden lee shore after a 180 degree wind shift in a gale its pretty easy to
H Miles,
We have 100m of 10mm chain and 100 meters of rode attached.. Thinking of priorities when you are anchored on a sudden lee shore after a 180 degree wind shift in a gale its pretty easy to
|
By
Danny and Yvonne SIMMS
·
#38696
·
|
|
Re: [Amel Yacht Owners] Baby on Board and where to go in the Bahamas -
Thanks Trevor. It would be very interesting to meet you. We will be on the hardstand at Rebak from March 31st to April 10th.
Thanks Trevor. It would be very interesting to meet you. We will be on the hardstand at Rebak from March 31st to April 10th.
|
By
Warren Traill <trailz@...>
·
#38695
·
|
|
Re: [Amel Yacht Owners] Baby on Board and where to go in the Bahamas -
Hello Warren,
Just checked out today and plan on departing tomorrow for Langkawi. We should be down there in a couple days. I’ll keep an eye out for you and look forward to meeting up.
Email is:
Hello Warren,
Just checked out today and plan on departing tomorrow for Langkawi. We should be down there in a couple days. I’ll keep an eye out for you and look forward to meeting up.
Email is:
|
By
tfortner1975
·
#38694
·
|
|
Re: [Amel Yacht Owners] Baby on Board and where to go in the Bahamas -
Hi Trevor. We are on our Sharki #15. We’ve been cruising West coast Thailand/Langkawi for some time. We are also considering the east rally and will be at Rebak next week. Are you guys in that
Hi Trevor. We are on our Sharki #15. We’ve been cruising West coast Thailand/Langkawi for some time. We are also considering the east rally and will be at Rebak next week. Are you guys in that
|
By
Warren Traill <trailz@...>
·
#38693
·
|
|
Re: [Amel Yacht Owners] Bowthruster spinning
Hi Paul, you need to put the thruster in the down position, unbolt the motor and lift it up to replace the flex coupling, two bolts come out with a standard Allen key but the bolt behind the motor
Hi Paul, you need to put the thruster in the down position, unbolt the motor and lift it up to replace the flex coupling, two bolts come out with a standard Allen key but the bolt behind the motor
|
By
Bob Grey
·
#38692
·
|
|
Re: How much anchor chain?
We had 70m of 10mm when we bought Elyse, which wasn't enough.
We replaced it with 100m of 10mm ISO Maggi Aqua 4 chain in 2014.
Crusing in the Pacific that is only just enough.
When I replace it again,
We had 70m of 10mm when we bought Elyse, which wasn't enough.
We replaced it with 100m of 10mm ISO Maggi Aqua 4 chain in 2014.
Crusing in the Pacific that is only just enough.
When I replace it again,
|
By
Alan Leslie
·
#38691
·
|
|
Re: [Amel Yacht Owners] 'Cristec Devolteur'
Hi Woody,"Devolteur" means "step down" or "buck", so I'm going to guess it's a DC-DC converter of some kind. It seems to be made by this company. I don't see anything exactly like it on their
Hi Woody,"Devolteur" means "step down" or "buck", so I'm going to guess it's a DC-DC converter of some kind. It seems to be made by this company. I don't see anything exactly like it on their
|
By
Ryan Meador
·
#38690
·
|
|
Re: How much anchor chain?
Miles,
If I was equipping Harmonie from scratch, I'd likely go with 100m of chain, although I'd stay with the 10mm chain we have. But we bought her with 60m of chain spliced to 60m of line. So far,
Miles,
If I was equipping Harmonie from scratch, I'd likely go with 100m of chain, although I'd stay with the 10mm chain we have. But we bought her with 60m of chain spliced to 60m of line. So far,
|
By
greatketch@...
·
#38689
·
|
|
How much anchor chain?
Hi there
My older (not super) Maramu came to me with 50m 12mm chain
I plan to cruise the North Atlantic with a slim chance of also going further across the Pacific.
Ideally I’d like 100m chain but
Hi there
My older (not super) Maramu came to me with 50m 12mm chain
I plan to cruise the North Atlantic with a slim chance of also going further across the Pacific.
Ideally I’d like 100m chain but
|
By
smiles bernard
·
#38688
·
|
|
'Cristec Devolteur'
I can't seem to find any reference to this transformer - see picture - on the forums. Is it an add-on by a previous owner or an Amel original? If so.. erm, what exactly is it for as I can't seem to
I can't seem to find any reference to this transformer - see picture - on the forums. Is it an add-on by a previous owner or an Amel original? If so.. erm, what exactly is it for as I can't seem to
|
By
alanwood123@...
·
#38687
·
|
|
Some outdated replies
Hello Amelians,
you may receive some recent but outdated emails from me. My smart phone email was playing up and was not sending. Now it is corrected there is a burst of old emails going out. Sorry
Hello Amelians,
you may receive some recent but outdated emails from me. My smart phone email was playing up and was not sending. Now it is corrected there is a burst of old emails going out. Sorry
|
By
Danny and Yvonne SIMMS
·
#38686
·
|
|
Re: [Amel Yacht Owners] Bowthruster spinning
Oops! I’m bad. Too much time in the sun latey.
With bestregards,
Mark
Skipper
Sailing Vessel- Cream Puff
www.creampuff.us
From:amelyachtowners@... [mailto:amelyachtowners@...]
Oops! I’m bad. Too much time in the sun latey.
With bestregards,
Mark
Skipper
Sailing Vessel- Cream Puff
www.creampuff.us
From:amelyachtowners@... [mailto:amelyachtowners@...]
|
By
Mark Erdos
·
#38683
·
|
|
Re: [Amel Yacht Owners] Bowthruster spinning
You have to change the security pin of the propeller you can do it in the sea by a diver
Best Regards
Dimitris Krasopoulos
Mob:+306944302318
2018-03-22 20:33 GMT+02:00 Porter McRoberts
You have to change the security pin of the propeller you can do it in the sea by a diver
Best Regards
Dimitris Krasopoulos
Mob:+306944302318
2018-03-22 20:33 GMT+02:00 Porter McRoberts
|
By
Dimitris Krasopoulos
·
#38682
·
|
|
Re: [Amel Yacht Owners] New Bowthruster unit - cost and in-stock?
Sounds good, great there was virtually no other damage.
Kind Regards
Danny
Sounds good, great there was virtually no other damage.
Kind Regards
Danny
|
By
Danny and Yvonne SIMMS
·
#38681
·
|
|
Re: [Amel Yacht Owners] Bowthruster spinning
This happened on our boat at inspection. It was fixed without a haulout in LE Marin.
Just FYI
Porter
Ibis
54-152
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
This happened on our boat at inspection. It was fixed without a haulout in LE Marin.
Just FYI
Porter
Ibis
54-152
Excuse the errors.
Sent from my IPhone
Www.fouribis.com
|
By
Porter McRoberts
·
#38680
·
|