Miles, If no one provides it soon, I can get you the measurement when we get back aboard Air Ops in about two weeks. In the meantime I can tell you that we have stored our Aquapro 10’ inflatable

HiPorter; Ouragent based out of Florida has provided us with a more competitive option than you have received through Lloyds of London. If you are interested, please sendme a private e-mail and I

Porter, Insurance is something that changes like the wind. You might try Velos Insurance UK. UK Tel: + 44 20 7929 4058 Insurance"at"velosgroup.co.uk They'll be good for you, except not in US

This is really great information Thank you!: Especially since Jack Martin can only come up with one quote for our boat starting April: Pantaenius America. Its 10k we were paying 6k with Falvey

Yup it's "B" size on Elyse SM437....it has nothing to do with the Yanmar engine of course, its the diameter of the prop shaft from the C-drive that determines it's size. Most 54's don't have Yanmar

We are hopefully’owners to be’ :) Living in Greenland saving for the Super Maramu has a bigdisadvantage. It is quite difficult to go ‘boat-shopping’ from the arctic! Wehave planned an Easter

Please have them look up Kimberlite, They said it was a standard line cutter. It is for the shaft that goes with the Yanmar Engine. I am almost sure it is a “B” size I have rebuilt it at

On Feb 19, 2018, at 6:05 PM, Stephen Morrison steve_morrison@... [amelyachtowners] <amelyachtowners@...> wrote:

Hello all. I recently had Nance and Underwood install new standing rigging here in Florida and noticed that the height of the pole support on the shrouds varied noticeably. I was also on another Amel

Our VHF has a history of not working for completely inexplicable reasons. It will receive but will not send, even at very close ranges. It will work for a time and then not work for a time. Thank

Hi all, The depth reading on the FFD flashes "CAL" alternating with the depth readout. The manual says this will happen after a system reset or as a result of the internal battery is exhausted.

Miles, Sorry, I am not on my boat currently so I cannot provide the measurement that you need at this time. I did want to wish you luck with your plans to section your 10’ Falmouth Punt and try

Hello Bob, Here are my Spurs invoices. You will see the ship name and my name. You will also see 1.1/2” Type B. Complete unit May

Hi All, I received a personal email asking the name of the insurance company that disappointed us. It was Haven Knox Johnson, a Lloyds of London Company. The broker was The Marina Shop of Opua NZ and

Hello fellow Maramilians ! I’m in the process of building a 10ft grp dinghy. Sailing rowing and motor is the plan It’s for the kids really but I’m hoping we can use it almost exclusively

We are in the process of purchasing a spare Spurs Cutter. When we were in Turkey we had to pay (national distributor in Istanbul) about the same amount as an entire unit costs in the US. We have

I take all the chain out every year to clean the anchor locker and as has been noted on previous posts, the plywood ceiling is always mouldy. Does anybody know why the anchor locker is painted

Hi, yes, my box is where you described it, just beneath the TV and on the same level like the seatbench. Best Regards, Alex NO STRESS

Nice! How much do they charge weekly or monthly? Sincerely, Alexandre --------------------------------------------

Thanks, Jeff ... caveat emptor it is!