I fear you will usually be disappointed with trying to “rub out” the faded spots on an Amel deck. The way these were made was the “brown” gel coat was brushed into the mold by hand, and then

Thanks, I will try it. Richard

Richard, I have seen acid or products with acid like On-OFF cause this to the colored Gelcoat faux teak. I think if that is the cause there is no reversing unless you can remove just the top surface

I have some spots where the color is gone from the faux deck, almost like drops of bleach hit it. Is there any stain that can be applied to restore the look? RichardDallett Mamba A54/68

It is a ploy to get clicks and generate advertising revenue, nothing more. They don't show you the cable running under the grass to power it. This video has been debunked many

These are just to collect views, somehow people catch on to these and generate views to the makers and makers get ad money. Sorry to ruin your hopes 🙂 -- Fair winds Ruslan Osmonov Phanthom, A54

Hi Sarah & Trev: The color is RAL 1013. It’s often called Oyster White but goes by other names as well. I hope this helps. Definitely try a test area first. Imay not match the other off-white on

good day to you, maramu owner did & do the cleaning once a year; set of scraper & brush on long wooden handle - I remove all suction hoses & replace. I also have the M32 socket welded on a steel tube

Thanks Richard, our boat's in Greece, when I read your message, this image flashed in my mind!! 🤣 Rachael & Robin Courtenay Pérdika SM232 Leros, Greece

My A 55 #63 from end 2017. I repainted all hatches this year plus different zones on masts . Envoyé de mon iPhone

Classic local corrosion . To be treated locally Envoyé de mon iPhone

Hi Ben. In my first attempt I reached your same conclusion: it is impossible. Then I found a way around and got it clean by using diapers and an extension gripper (you can buy it in a chinese

Another tip that works in the Northeast at least- the tiny gnats and biting flies dislike Catnip. Pet stores and Amazon carry Capt Kitty Catnip spray. We sprayed liberally on all exposed skin dusk and

Hi everyone, ‘’the refit of our Maramu #162 continues with the focus over winter having been inside, with headlining & insulation, soft furnishings, taps, anchor locker and a variety of other

It is relatively easy if you follow these instructions for a SM (Maramu will be a similar process). Obviously, if it has not been cleaned regularly it will be substantially more difficult. CW Bill

I have reviewed about 15 A55s and many more A54s. I can mostly answer your questions with some facts and some opinions. The facts stand for themselves, the opinions are mine.. Mast/spar paint

Hi Ben, I used a pressure washer; an essential tool in my opinion. Jean-Pierre Germain, ex Eleuthera, SM007

Thank you for your inputs. I am a bit surprised however that all 3 of you said it was easy to access.. Could it be that on a SM the access to the bildge keel bolt is different and easier than on the

I had an arch made for me in Grenada by Nick at Spice Island. I showed him the Emek design, we actually looked at one together on a SM. We shook it and it flexed a lot, so we discussed how to rectify

Dear all Thank you all so much for all the advice we’ve received. We’ll be busy using Mark and Stefan’s designs to make our own when we’re next back out on her. Good tip about the Deet for the