Thank you, all clear now. Regards Jarek SY NOA BLUE SM 201

I replaced my standing rigg this spring. Wire from Kos (south Korea, one of the largest manufacturer of rigging wire, same spec as ACMO) Terminals from ACMO, and turnbuckles from Selden, price just

Steve, It is worth seeing Martinique again. And Gaeton and his team are hard to beat. They have more Amel experience that almost anyone else.

Steve, Correction in pricing. Caraibe Marine is currently 12,500 Euros including labor. This includes the 15% discount I negotiated with Caraibe for my clients. A client had a complete rigging change

Thanks Bill, and good to hear you again. Steve in Rio Dulce

Hey Dan- you are speculating on if there is a foot switch leak but that is knowable. Just open the windlass, inspect the switches and connections, and replace the gasket, which you can make

Dear Amelians, We have a SM built 1996 . no 158. with a Onan 6.5 KvA MDKDP Generator. We found a small fuel leak on the Onan fuel filter head. Tried to tighten the nylon screws (Check ball cap and

Amel Friends, I am replacing the standing rigging on my 2004 SM2K. I very much want to replace with Acmo, however due to shipping, COVID, lunar cycle, price of tea in China blah,blah,blah. Acmo is

Top photo is the fuel pump for the diesel heater Bottom photo is on Page 373 of the Amel Book for the Vacuum switch

Steve, You can order the kit from ACMO which includes everything and it is exactly cut. Because of the recent agreement signed by France and the US, you will need an EIN number. Shipping may be an

Looks like an Eberspacher fuel pump Ian Ocean Hobo SN 96

I'm overdue for new standing rigging, can anybody give me a ballpark price. Steve / Forever Young / 53 Amel / 272

The Top picture looks like an electric fuel pump.. often used in diesel heaters. Chris Amarok SM285

Hi It looks like it is the vaccum sensor. If só, It triggers an alarm if/when the main seawater inlet is clogged. Em sex., 10 de dez. de 2021 às 13:37, Jarek Zemlo via groups.io

Hello, after organising my spares I found 2 items that previous owner did not described. Any ideas what it is? Thank you in advance Jarek SY NOA BLUE SM 201

In the same vein as Geovanni, I had a windlass cover made from super Sunbrella. Only removed when anchoring or lifting anchor and always reinstalled once at anchor. Jean-Pierre Germain, Eleuthera,

We placed cut-t0-size spun furnace filter material over the inlet. Low resistance and easy to clean with water. Air flow is very good. Avaiable in most hardware stores. We also replaced AC

Il 09/12/2021 15:31, Dan Carlson ha scritto:

I will try, but first I need to borrow an unused new gear from someone. Hoping I find one...I know there are several out there. Bill

Hi Bill We tried to email the Swiss guy 4 times with no reply. We would really appreciate it if you can have the furling gear fabricated by another source. We appreciate your efforts to assist with