|
Re: Wiper at the bottom of the companionway slider.
Hi Eric,
The product is a belt weather stripping for auto side windows. I bought mine from JC Whitney ( now carparts.com), but I can't find it on their website. Mike (Aletes) bought a similar belt
Hi Eric,
The product is a belt weather stripping for auto side windows. I bought mine from JC Whitney ( now carparts.com), but I can't find it on their website. Mike (Aletes) bought a similar belt
|
By
karkauai
·
#60266
·
|
|
Test plug on a 54 Volvo 110 D3
Hello everyone
I have had an engine breakdown on my Volvo Penta 110 with an electrical engine fault message.
The technician on board doesn’t find where to plug his test device.
Could somebody tell
Hello everyone
I have had an engine breakdown on my Volvo Penta 110 with an electrical engine fault message.
The technician on board doesn’t find where to plug his test device.
Could somebody tell
|
By
Bertrand Quénot
·
#60265
·
|
|
Re: Wiper at the bottom of the companionway slider.
Eric
I kept a copy. It was from Mike Ondra SM 240:
CW Bill
Eric
I kept a copy. It was from Mike Ondra SM 240:
CW Bill
|
By
CW Bill Rouse
·
#60264
·
|
|
Re: Wiper at the bottom of the companionway slider.
Alban of Amel in Marin stocks the original companionway wiper stock.
Bill
Cloudstreet
Alban of Amel in Marin stocks the original companionway wiper stock.
Bill
Cloudstreet
|
By
william reynolds
·
#60263
·
|
|
Wiper at the bottom of the companionway slider.
Many years ago I bought the Renault rubber gasket that sits at the bottom of the companionway vertical door to keep water out. About 8 years ago I replaced it. I am aware that it is no longer
Many years ago I bought the Renault rubber gasket that sits at the bottom of the companionway vertical door to keep water out. About 8 years ago I replaced it. I am aware that it is no longer
|
By
eric freedman <kimberlite@...>
·
#60262
·
|
|
Re: Anchor winch turning itself on!
We once had the windlass kick on all by itself shortly after anchoring. Replacing those rubber switch covers or "boots" proactively is the key. If you can't source the boots, an inexpensive push
We once had the windlass kick on all by itself shortly after anchoring. Replacing those rubber switch covers or "boots" proactively is the key. If you can't source the boots, an inexpensive push
|
By
Mike Longcor (SV Trilogy)
·
#60261
·
|
|
Re: Anchor winch turning itself on!
On the 55, there are two separate feeds for the anchor winches: one controlled from the dashboard in the cockpit, which has separate switches for the port and starboard winches. The other is
On the 55, there are two separate feeds for the anchor winches: one controlled from the dashboard in the cockpit, which has separate switches for the port and starboard winches. The other is
|
By
Joerg Esdorn
·
#60260
·
|
|
Re: Anchor winch turning itself on!
Greetings!
We were underway last year from Chesapeake Bay to Antigua. When at 2:30 AM LT the windlass turned on and wanted to let chain out.
Our anchor pin was in so it prevented the anchor to drop
Greetings!
We were underway last year from Chesapeake Bay to Antigua. When at 2:30 AM LT the windlass turned on and wanted to let chain out.
Our anchor pin was in so it prevented the anchor to drop
|
By
Michael & Robyn
·
#60259
·
|
|
Re: Need help from a 54 owner in La Rochelle
Perfect. I'll send you a private email with the details.
Bill
Perfect. I'll send you a private email with the details.
Bill
|
By
CW Bill Rouse
·
#60258
·
|
|
Re: Need help from a 54 owner in La Rochelle
Hi Bill
I can help and want to let it make for me as well. We’re now sailing along the Brittany coast and will be ack in La Rochelle on Thursday.
Regards
Laurens
A54 - 92
Fun@Sea
Hi Bill
I can help and want to let it make for me as well. We’re now sailing along the Brittany coast and will be ack in La Rochelle on Thursday.
Regards
Laurens
A54 - 92
Fun@Sea
|
By
Laurens Vos
·
#60257
·
|
|
Need help from a 54 owner in La Rochelle
Hopefully, there is a 54 owner in La Rochelle who can help me with a project. It involves allowing someone from SOFAMARIN to make some measurements in your engine room. I am attempting to have them
Hopefully, there is a 54 owner in La Rochelle who can help me with a project. It involves allowing someone from SOFAMARIN to make some measurements in your engine room. I am attempting to have them
|
By
CW Bill Rouse
·
#60256
·
|
|
Re: 2001 Super Maramu Headliner
Rick,
Regrettably fabrics, vinyl, and wallpaper styles, colors, and designs change annually. I know that Amel has not had any since before the end of the SM production because some of the last SMs has
Rick,
Regrettably fabrics, vinyl, and wallpaper styles, colors, and designs change annually. I know that Amel has not had any since before the end of the SM production because some of the last SMs has
|
By
CW Bill Rouse
·
#60255
·
|
|
Re: 2001 Super Maramu Headliner
Rick, Sailrite told me there is shortage of headliners but they have similar products.
If the headliner is not sagging, that PVC takes paint quite well and it does not crack.
--
John Bernard "JB"
Rick, Sailrite told me there is shortage of headliners but they have similar products.
If the headliner is not sagging, that PVC takes paint quite well and it does not crack.
--
John Bernard "JB"
|
By
JB Duler
·
#60254
·
|
|
2001 Super Maramu Headliner
Hey folks anyone know a source for the vinyl beige headliner material AMEL used to use? Maud says AMEL no longer carries it.
Thanks!!
Rick Stanley
S/V Althea
Rock Hall, MD
Hey folks anyone know a source for the vinyl beige headliner material AMEL used to use? Maud says AMEL no longer carries it.
Thanks!!
Rick Stanley
S/V Althea
Rock Hall, MD
|
By
Rick Stanley
·
#60253
·
|
|
Re: Gas struts for cockpit access
Thanks for the information.
Ron Hynes
954.319.0944
Thanks for the information.
Ron Hynes
954.319.0944
|
By
Ron Hynes
·
#60252
·
|
|
Re: Gas struts for cockpit access
The specs for the struts are:
A1A1N40-250-608/400N316L Stainless Steel
Meaning astroke of 250 mm with 608 mm overall
400 NMresistance
The stroke is 8mm
The Diameter ofthe cylinder is 19
The specs for the struts are:
A1A1N40-250-608/400N316L Stainless Steel
Meaning astroke of 250 mm with 608 mm overall
400 NMresistance
The stroke is 8mm
The Diameter ofthe cylinder is 19
|
By
Mark Erdos
·
#60251
·
|
|
Re: Anchor winch turning itself on!
Not an Amel story but I had a close call many years ago. My wife and I were running a charter yacht in the West indies. We had just had a full day to windward sailing from St Barts. I can not
Not an Amel story but I had a close call many years ago. My wife and I were running a charter yacht in the West indies. We had just had a full day to windward sailing from St Barts. I can not
|
By
Nick Newington
·
#60250
·
|
|
Re: Anchor winch turning itself on!
It is recommended to leave the circuit breaker off until you are about to drop anchor.
A friend was delivering a 60/70' motor yacht from San Francisco to Seattle, as you may know beating against the
It is recommended to leave the circuit breaker off until you are about to drop anchor.
A friend was delivering a 60/70' motor yacht from San Francisco to Seattle, as you may know beating against the
|
By
JB Duler
·
#60249
·
|
|
Re: Mainsail furler top seal
Bill,
please mention that the internal diameter of the seal is still the same - 45mm.
It was just the issue of the external diameter 60->58.
Bill,
please mention that the internal diameter of the seal is still the same - 45mm.
It was just the issue of the external diameter 60->58.
|
By
Gregory Dmitriev
·
#60248
·
|
|
Re: Anchor winch turning itself on!
I always open the circuit breaker when sailing i.o. to avoid unwanted windlass movement. Imagine it dropps the hook when sailing with 8 knots in waters not deeper then the chains length or even in
I always open the circuit breaker when sailing i.o. to avoid unwanted windlass movement. Imagine it dropps the hook when sailing with 8 knots in waters not deeper then the chains length or even in
|
By
Bernd Spanner
·
#60247
·
|