Hello group, Does anyone have a source / part number / brand for the tiny lights on the SM 24V panel (used for the freezers, anchor lights, nav lights etc) ? Thanks for any

Curt, Languedoc looks to be in exceptional condition from the photos. If you happen to stop in Titusville, Florida on your way up, drop me a note at: Lokiyawl2 at aol.com. The marina basin is

Hello all. We are still offering our 1987 Maramu for sale. Languedoc is now in Stuart, Florida finishing upgrades and repairs after 4 years in the Caribbean. We will be moving up the coast

Jeff, Having just stayed at both, I would recommend Blue Haven if you were going to leave the boat unattended. At Turtle Cove we were side tied to a rather rough bulkhead. Not terrible, but the

Thank you all for your comments. I checked out the space and there may be enough to mount the drive in the opposite side of the electric one. I also though that pump could be mounted on the

Hello Jeff, Going to echo Mark. I stayed at Blue Haven Marina for 2.5 months, was only going to stay 2 to 3 weeks because of the price, but the marina was so nice, the only 5 star marina I stayed in

Jeff, You have twooptions. It depends on how much money you want to spend. The lower price optionis Turtle Cove at $0.85 per foot per day for the monthly rate or Blue Haven at $1.75per foot per

I am curious if there is anyone that has kept a log of engine turbo performance under way? My 54 has the Volvo D3-110 engine. I regret that in the past I have not recorded the turbo boost pressure at

Yes, I can confirm Martin is correct, it is a H6 Autoprop on the 54. Bob Gallivant Amel 54 #31 currently at St. James Island, USVI

Good Morning Amelians, I'm looking for recommendations on where to pick up a slip in Provenciales. I see there are a couple of options. I plan to slide down there in a month, and leave Spirit there

An interesting thing that either I forgot or was never told on our '55 visits, but which came up on this week's '55 demo to the Delos crew, is that Amel installs that boat's hydraulic autopilot pump

Thanks Martin. I put my pants on one leg at a time, too! The great thing about this group is the great willingness to help each other. This is of great value to us all. Thanks again, Martin Joel F.

Hello Everyone. I am far away from an Amel boat today and my failing memory cannot recall which model of Autoprop is on the Amel 54. Can anyone help me out with the Bruntons Autoprop Model Number

Jose, I have never put a hydraulic drive in a SM2K, but have installed and used them on other boats. They are easy to install, relatively. The key being they need to have someplace VERY strong to

Duane, Good question... I actually spread cement on the male connector, and then slide the hose on while the cement is still wet. double clamping immediately. It does take some time to dry, and

Bill, One last question on using contact cement to join the unbarbed connections. Do you spread it on both surfaces and allow it to become tacky before joining as usual? Usually contact cement bonds