Ahh but how to choose the one to carry the bucket and sponge? ;)

Mark Hanna, who owns Sharki #49 Marguerite, suggested to use “tooth paste” to remove scratches from the windshield and it worked very well for me! Sincerely, Alexandre SM2K #289 NIKIMAT Island

Hello Bill, I tried RainX with mixed results…. now I use lots of fresh water from the cockpit hose (to which I’ve added at least 4 meter extension) then gently hand rub the remaining crystals. My

I use PLEXUS plastic cleaner preservative. Seals all clear plastic and makes it easier to flush salt, bird giftings, and dirt from the dodger without scratching it. Great stuff. Expensive as great

How ever you solve it. The most important is that you use a LOT of water to rinse the salt crystals away. They make terrible scratches on the windows. We have a window cleaner with sponge and rubber,

Hi all, I am in the process of getting insurance for an Amel 54 and was wondering what owners were paying for this coverage for a 54. I read the older posts about pros and cons of different policies

Hi Bill, the previous owners of my boat fabricated a sponge on a stick apparatus for wiping the glass from inside the cockpit. Not glamorous i agree, but is helps. I am experimenting with the

Harmonie is the first boat I have sailed where the primary view from the helm forward is in under the dodger and through the windows. I do love the arrangement. The canvas part of our dodger easily

Thanks!

Ask for Ral, He is the head of the machine shop. He will tell you where to get it if he does not have some in his shop. Or possibly a flat piece of delrin. I think the fiberglass sheet stock would

Oh sure. What's a good place for that? Still FKG? Jacob Champness Maramu 202 - Lark St. Martin

After working on my self-steering gear failure, I thought I would put some info in the "Files" section. If you see anything I could improve on, or that is in error, please let me

Jacob, I would go with a solid piece of fiberglass , I am sure you can find a scrap in Cole Bay. Fair Winds Eric Kimberlite Amel Super Maramu #376

Thanks Eric. I think I'll make a replacement from a little block of plywood wrapped in glass and epoxy and sanded down to size. Either that or have one machined to match from aluminum over at FKG.

Hi Duane, I just replaced my S3G with a used X30 from Craigslist and it is working smoothly. The mounting holes are about 2cm closer together so you need to drill a new mountin hole. The bis for

On magazine articles of the era, the 54 is attributed to "Amel Design Team." It is great to have Joel's confirmation of the people who conformed the team! With regard to the 55, etc., here in Europe

Hi Willem, Yes they are industry standard, but I always try the Amel originals first. And yes, I am Dutch (live close to Rotterdam). We keep our SM in Pescara Italy, but wil move to Lefkas Greece this

Duane If I were you, I would buy the X30 from him and send him your S3G for repair. CW Bill Rouse Admiral, Texas Navy Commander Emeritus Amel School 720 Winnie St Galveston Island, TX 77550 +1(832)

Hello again Hanspeter . I believe it is very important that all the information we share on this useful group should be as correct as it can be. Below is part of the statement you made that I found to

Hi Bill, I guess I wasn't clear, I meant the Autopilot would not turn the wheel while on "Auto". The clutch engages but the Autopilot won't turn the wheel in response to "+10". I've been in contact