Is is possible that no one has ever had such problems on bow-thruster? May I have incorrectly fitted foam washers? Thanks for your help and greetings. enio rossi #SN122 EARENDIL ITALY

Mark, At Budget Marine, the AAA/10206 looks to be, and measures exactly the same as the Amel installed switch. It is made of marine brass and plastic and sells for about $24USD. The Trinidad Budget

Hi James, I've heard that attending to this should not be ignored, and thatthereafter regular maintenance every ? years to re-bed the railingsto minimise the chances for moisture ingress. Like the

Mark, If you only need the rubber cover of the push button try this ( 4,50 Euro) http://www.watski.de/Schalter-und-Schaltpaneele-111uy/1/n Hajo SM 150 Serafine Carloforte San Pietro Sardinien Von

Yep! Time to crank up the SailRite and make a cover. With best regards, Mark Super Maramu 2000 Hull #275 www.creampuff.us Currently cruising: Tampa Bay for hurricane season

Mark, I will post the info as soon as I get the intel from my contact at Vetus. Fair Winds Eric Kimberlite Amel Super Maramu #376

Ahh. Wish I had read this before thumbing through all 348 pages of the catalog J Thanks! With best regards, Mark Super Maramu 2000 Hull #275 www.creampuff.us Currently

Hi Eric, I see the deck mount foot button in the Vetus catalog. However, I do not see anything like these? With best regards, Mark Super Maramu 2000 Hull

If your budget is USD, you may be able to find an older Maramu that has been refitted for that price. ---In amelyachtowners@..., <mimtsqwbzz5xbfai4gco4otu3lpigperpq6qnatm@...> wrote : Hi we are

On our boat we almost never use the buttons on the windlass. The previous owner added a wired remote control made by Quick that lives in a holder on the bulkhead in the port side sail locker and

I just wrote him and will get back to the group as soon as he responds. Fair Winds Eric Kimberlite Amel Super Maramu #376 The contact at Vetus for the push buttons and caps is dbarrett@...

Eric...I just paged through the entire 346 page 2016 Vetus catalogue and couldn't find the buttons. Do you have a part number I could reference? Steve Aloha SM72

The contact at vetus for the push buttons and caps is dbarrett@... dave barrett. It is in stock but not in the catalog. Fair Winds Eric Kimberlite Amel Super Maramu #376

Thanks for sharing Francisco, You are no the first one mentionning the poor quality of these run dry impellers… Hope it was not too difficult to locate all the broken blades and remove them from

The windlass buttons are a stock item with Vetus. Fair Winds Eric Kimberlite Amel Super Maramu #376

Mark, One other thing. Since I added a windlass cover 6 years ago, I have not had a failure. Bill Rouse BeBe Amel 53 #387 Sent from my tablet +1832-380-4970 USA Voice Mail

Francisco, I posted similar results with Globe Run-Dry Impellers about a year ago. I contacted Globe and gave them an opportunity to inspect the impellers. They refused and also refused to replace

Hi Joe, Thanks for the info. I know Steve Leeds very well and will give him a call. Hopefully he has a local source. With best regards, Mark Super Maramu 2000 Hull

Hi Steve, I checked with Amel and Maud said they do not stock them anymore. They offer a replacement kit that includes a plastic adaptor (the threads have changed). They are 81.40 Euros per

Hi Mark, I got 2 spares from Amel Caribe back in April. They were either 65 euros each, or 65 for both. This was the switch with rubber cap attached. I keep a windlass cover on when possible to reduce