I'm looking for suggestions on how to put screens over the small portholes on the SM2000, for example the one over the stove/oven. Thanks, Duane Wanderer, SM#477

There are basically two types of P79, One is a direct connection to Hydra 2000 or Raymarine or....any analogue system, Any of these should work...just cut off the connector and wire directly. P79,

In a related thought on the second half of your post, although at first glance speed through water (STW) and speed over ground (SOG) might seem redundant they are not. Having both allows you to

For compatibility information on the P79 you might call Airmar directly. They have good tech support. I have a P79, but did not connect it to the Hydra. Bill Kinney SM160 Harmonie Ponce, PR

Hi Bill and others, Thanks for the information and idea's you provided. Just a question about the Airmar P79 depth only transducer. Which specific model do I need to connect this to the Hydra 2000

Thanks, Duane. Mine are white, so I'll replace them when I change my filters. I'll be prepping for a few years in the SPac and will buy spares for most everything, that's now on my list. Thanks

Hi email address is bazgrayson at hotmail.comThanks From: amelyachtowners@... on behalf of 'sailormon' kimberlite@... [amelyachtowners] Sent: Saturday, 18 March 2017 5:05:48 p.m. To:

Kent, I have the Duo 60 and recently replaced the filters. They were SW30-2521 from Air Water & Ice, 2.5 inches diameter by 21 inches in length. Another thing to check is the end caps for cracks.

Thanks everyone!!! Ordered and done. Bill SM #195 It's all Good

Thanks, Bill. I didn't know if the 160 just used more membranes, or different ones. Since they are all the same diameter, maybe the fittings and o-rings are the same? You are a veritable fount on

Lewmar Size 1 End Stops, sold in pairs. CW Bill Rouse Admiral, Texas Navy Commander Emeritus Galveston Island Sent using Google Fi +1(832) 380-4970

Gary, Did you go through the Hydra setup for the gauges? This is the process that assigns gauge "A" data "X"? Let me know. CW Bill Rouse Admiral, Texas Navy Commander Emeritus Galveston Island Sent

Kent, I know the answer to your question, but you probably want more. The answer is no, they are not the same. More: SW30 - stands for saltwater 30 series 2540 - is the measurements of the membrane

How did you balance the weight of 75 gallons (over 500 pounds) of diesel that far outboard on the port side? I ask because I am in a constant battle to keep Harmonie from heeling to port, and I have

Hi Eric, Should have been in the one I sent you privately. karkauai at yahoo dot com Thanks again! Kent S/V Kristy SM243

Sebastien, I know this boat. The gentleman that the present owner bought Languedoc from is a very experienced marine industry professional in the UK. In terms of systems, particularly the electrical,

Well, hesitated to write before I figured it out, but have an ongoing saga that just seems to beat the odds. The Boat Speed dial did not have a backlight ... dang it, I wanted a back light! So,

Hi, Please send me your email address. Fair Winds Eric Kimberlite Amel Super Maramu #376

Please send me your email address. Fair Winds Eric Kimberlite Amel Super Maramu #376

Bill, I just got mine off the rack at a marine store in Martinique. No clue what the part number was but it seemed readily available and fit just fine. Should be able to unscrew it and pocket it