|
Re: D Marin Corfu (aka: Gouvia Marina)
Hey there, are you wintering ON the boat, or just a place to keep her in the water? We spent two excellent winters in Mandraki port, the tiny venetian harbor under the big castle, for pennies. As in
Hey there, are you wintering ON the boat, or just a place to keep her in the water? We spent two excellent winters in Mandraki port, the tiny venetian harbor under the big castle, for pennies. As in
|
By
Davi Rozgonyi
·
#64629
·
|
|
D Marin Corfu (aka: Gouvia Marina)
Hello all,
Can anyone comment on whether the D Marin in Corfu is a recommended place to winter a boat? Would anyone also have recommended contacts there? Are there any recommended alternatives in
Hello all,
Can anyone comment on whether the D Marin in Corfu is a recommended place to winter a boat? Would anyone also have recommended contacts there? Are there any recommended alternatives in
|
By
Paul & Christine Filgiano
·
#64628
·
|
|
Re: Black Oil in the Air-filter and housing
I had this once and it was seals in the turbo. It was a near new just still in warranty Volvo D 2 75 with only a few hours on it. After vigorous pushing from me Volvo replaced the turbo.
Kind
I had this once and it was seals in the turbo. It was a near new just still in warranty Volvo D 2 75 with only a few hours on it. After vigorous pushing from me Volvo replaced the turbo.
Kind
|
By
Danny and Yvonne SIMMS
·
#64627
·
|
|
Re: Looking for agent/surveyor in south of France (Med) [What percentage do negotiations tend to bring the down >>> [the] asking price ]
Dear Martijn ,
Just a recent experience.
We sold our Amel Kirk last winter for the price we paid 15(!) years ago. This was above our asking price.
We bought an Amel Sharki and paid the asking
Dear Martijn ,
Just a recent experience.
We sold our Amel Kirk last winter for the price we paid 15(!) years ago. This was above our asking price.
We bought an Amel Sharki and paid the asking
|
By
Sietske Cnossen
·
#64626
·
|
|
Re: Black Oil in the Air-filter and housing
Hi Ruedi,
After reading your email I had a quick look at the workshop manual for my D3 110A. I also had a look around the internet. I just thought that before you go and get an engineer you could do
Hi Ruedi,
After reading your email I had a quick look at the workshop manual for my D3 110A. I also had a look around the internet. I just thought that before you go and get an engineer you could do
|
By
Nick Newington
·
#64625
·
|
|
Re: Black Oil in the Air-filter and housing
Hi Nick,
Thank you for your advice. I will certainly do an Oil- and Filter change and clean the top cover.
What is the PCV Valve? Is this a specific part of the Oil-Filter top?
Ruedi
Von:
Hi Nick,
Thank you for your advice. I will certainly do an Oil- and Filter change and clean the top cover.
What is the PCV Valve? Is this a specific part of the Oil-Filter top?
Ruedi
Von:
|
By
WASABI - Rudolf Waldispuehl
·
#64624
·
|
|
Re: Black Oil in the Air-filter and housing
Ruedi, another quick thought. Take off the oil filter top and inspect it closely, maybe it is clogged. Could be you just need to give it a thorough clean, maybe in some solvent. Or blast it with
Ruedi, another quick thought. Take off the oil filter top and inspect it closely, maybe it is clogged. Could be you just need to give it a thorough clean, maybe in some solvent. Or blast it with
|
By
Nick Newington
·
#64623
·
|
|
Re: Black Oil in the Air-filter and housing
Hi Ruedi,
I am not a qualified Volvo mechanic either, but you must be getting some blow back. This could be caused by dirty engine oil clogging the oil lines or filter and/or a leaking Pressure
Hi Ruedi,
I am not a qualified Volvo mechanic either, but you must be getting some blow back. This could be caused by dirty engine oil clogging the oil lines or filter and/or a leaking Pressure
|
By
Nick Newington
·
#64622
·
|
|
Re: Bronze Gear
OK, remember there were 2 different brands of outhaul gearboxes installed on a SM. First, you need to determine the brand.
Bill
CW Bill Rouse Amel Owners Yacht School
+1 832-380-4970 |
OK, remember there were 2 different brands of outhaul gearboxes installed on a SM. First, you need to determine the brand.
Bill
CW Bill Rouse Amel Owners Yacht School
+1 832-380-4970 |
|
By
CW Bill Rouse
·
#64621
·
|
|
Re: Black Oil in the Air-filter and housing
Ruedi,
Like many issues, this can have multiple causes. The most serious cause is worn piston rings causing ignition blow-by. Other causes can be the timing is not correct because of a worn timing
Ruedi,
Like many issues, this can have multiple causes. The most serious cause is worn piston rings causing ignition blow-by. Other causes can be the timing is not correct because of a worn timing
|
By
CW Bill Rouse
·
#64620
·
|
|
Re: Looking for agent/surveyor in south of France (Med) [What percentage do negotiations tend to bring the down >>> [the] asking price ]
Just want to say thanks for the level of detail you have gone into here and on the other thread. Very helpful for a future prospective buyer.
Regards,
Rodney Aylmore
(3-4 years away from Amel
Just want to say thanks for the level of detail you have gone into here and on the other thread. Very helpful for a future prospective buyer.
Regards,
Rodney Aylmore
(3-4 years away from Amel
|
By
Rodney Aylmore
·
#64619
·
|
|
Re: Bronze Gear
Hello Steve
I got mine from Maude in Amel La Rochelle !
not at the boat so can’t tell you the price but cheaper than $700 !
--
Nicolas Klene
DarNico
SM2K # 471
In Marseille
Hello Steve
I got mine from Maude in Amel La Rochelle !
not at the boat so can’t tell you the price but cheaper than $700 !
--
Nicolas Klene
DarNico
SM2K # 471
In Marseille
|
By
Nicolas Klene
·
#64618
·
|
|
Re: Looking for agent/surveyor in south of France (Med) [What percentage do negotiations tend to bring the down >>> [the] asking price ]
From a potential buyers perspective I agree with most of the above.
A well known broker told me last year he had a waiting list of buyers for SMs.
I have seen no SNs for sale in Europe or North
From a potential buyers perspective I agree with most of the above.
A well known broker told me last year he had a waiting list of buyers for SMs.
I have seen no SNs for sale in Europe or North
|
By
Paul Harries
·
#64617
·
|
|
Re: Replace the Hailer - Horn
#order
Hi Ruedi
It could an Icom SP 37 external speaker.
In any case this Icom hailer should do the job.
Philippe
Hi Ruedi
It could an Icom SP 37 external speaker.
In any case this Icom hailer should do the job.
Philippe
|
By
Philippe Chatton
·
#64616
·
|
|
Re: Bronze Gear
Steeve,
Amel SAV
215 euros
Dominique
Irko
Steeve,
Amel SAV
215 euros
Dominique
Irko
|
By
Dominique Sery <dominiquesery@...>
·
#64615
·
|
|
Black Oil in the Air-filter and housing
Dear Amelia’s
I’m not a Diesel-Engine Mechanic or Engineer and therefore excuse my unqualified question. I have discovered Oil dropping out of the Air-Filter on my Volvo D3-110 iC and I’m not
Dear Amelia’s
I’m not a Diesel-Engine Mechanic or Engineer and therefore excuse my unqualified question. I have discovered Oil dropping out of the Air-Filter on my Volvo D3-110 iC and I’m not
|
By
WASABI - Rudolf Waldispuehl
·
#64614
·
|
|
Replace the Hailer - Horn
#order
Dear Amelia’s
On my A54 the Hailer - Horn gave up and I like to replace. The Horn was installed by AMEL originally and is connected to the Raymarine Ray240E VHV.
I was not able to find any Brand
Dear Amelia’s
On my A54 the Hailer - Horn gave up and I like to replace. The Horn was installed by AMEL originally and is connected to the Raymarine Ray240E VHV.
I was not able to find any Brand
|
By
WASABI - Rudolf Waldispuehl
·
#64613
·
|
|
Re: Another instruction on engine and c-drive mounts and vetus coupling alignment
Many thanks for your encouraging comments and feedback. As stated, I certainly didn’t invent anything, just followed a process that was already described in several posts by lots of people
Many thanks for your encouraging comments and feedback. As stated, I certainly didn’t invent anything, just followed a process that was already described in several posts by lots of people
|
By
Raul Schleier
·
#64612
·
|
|
Re: Looking for agent/surveyor in south of France (Med) [What percentage do negotiations tend to bring the down >>> [the] asking price ]
With regard to Amel yachts;
In my view it is a sellers market. There are a number of factors at play;
1. Not least the rising cost of manufacturing. The cost of resin is rising in line with oil
With regard to Amel yachts;
In my view it is a sellers market. There are a number of factors at play;
1. Not least the rising cost of manufacturing. The cost of resin is rising in line with oil
|
By
Nick Newington
·
#64611
·
|
|
Re: Spare parts availability in Galveston
Hi,
Thanks for all the replies. We’re actually going to be in Houston on a business related trip, the boat is in Grenada where we’re headed after Houston. I was just hoping that I may find these
Hi,
Thanks for all the replies. We’re actually going to be in Houston on a business related trip, the boat is in Grenada where we’re headed after Houston. I was just hoping that I may find these
|
By
Paul Dowd and Sharon Brown
·
#64610
·
|