|
Re: [Amel Yacht Owners] One wire to many?
Thank you, you are right it has never worked so did not looked to close, but now it's rather obvious where it is, an other fault to (not to serious) to find out
Thanks
Paul on S/Y Kerpa SM#259
Thank you, you are right it has never worked so did not looked to close, but now it's rather obvious where it is, an other fault to (not to serious) to find out
Thanks
Paul on S/Y Kerpa SM#259
|
By
Paul Osterberg
·
#28423
·
|
|
Re: [Amel Yacht Owners] One wire to many?
Good morning Paul,
Our serial number are not far away…
On my 24 Volt Panel, I have a little white light right next to the Dirupter/breaker of the Fresh Water pump
Have a look:
Good morning Paul,
Our serial number are not far away…
On my 24 Volt Panel, I have a little white light right next to the Dirupter/breaker of the Fresh Water pump
Have a look:
|
By
Alexandre Uster von Baar
·
#28422
·
|
|
Re: [Amel Yacht Owners] One wire to many?
I have no light on my fresh water pump, only on the bilge pump
Paul Amel SM 259
I have no light on my fresh water pump, only on the bilge pump
Paul Amel SM 259
|
By
Paul Osterberg
·
#28421
·
|
|
Re: [Amel Yacht Owners] One wire to many?
Isn't it the one going to the light on the 24 Volt panel?
Sincerely, Alexandre
SM2K #289 NIKIMAT
Club Nautico de San Juan, Puerto Rico
--------------------------------------------
Isn't it the one going to the light on the 24 Volt panel?
Sincerely, Alexandre
SM2K #289 NIKIMAT
Club Nautico de San Juan, Puerto Rico
--------------------------------------------
|
By
Alexandre Uster von Baar
·
#28420
·
|
|
Re: [Amel Yacht Owners] One wire to many?
Hi
Could it be for the light on the switch panel to indicate the pump is on?
Andrew
Ronpische
SM 472
Canet-en-Roussillon
Hi
Could it be for the light on the switch panel to indicate the pump is on?
Andrew
Ronpische
SM 472
Canet-en-Roussillon
|
By
Andrew & Kate Lamb
·
#28428
·
|
|
One wire to many?
Today I change the original fresh water pump, with a Jabsco Par Max 4, not a big deal, but to my surprise there was three cables to the old pump, One blue negative one brown positive and a thin black
Today I change the original fresh water pump, with a Jabsco Par Max 4, not a big deal, but to my surprise there was three cables to the old pump, One blue negative one brown positive and a thin black
|
By
Paul Osterberg
·
#28419
·
|
|
Re: [Amel Yacht Owners] '81 Mango dinette cushion replacement
I can recommend North Beach Marine Canvas, in San Francisco. Not cheap, but she does excellent work.
I have no idea if she will work “remotely” but probably worth a phone call.
Bill Kinney
SM
I can recommend North Beach Marine Canvas, in San Francisco. Not cheap, but she does excellent work.
I have no idea if she will work “remotely” but probably worth a phone call.
Bill Kinney
SM
|
By
Bill Kinney <greatketch@...>
·
#28418
·
|
|
Re: [Amel Yacht Owners] Upgrading all electronics
Hello Kent, My Sterling is the Procharge N, only charger. It has been installed a lot time ago, but I have seen the problem only now, touching the mooring, wet of salt water while connected to the
Hello Kent, My Sterling is the Procharge N, only charger. It has been installed a lot time ago, but I have seen the problem only now, touching the mooring, wet of salt water while connected to the
|
By
rossienio@...
·
#28438
·
|
|
Re: Rollbar stability
Stefania and Dietmar,
Welcome. Your arch looks very neat. To reduce flexing you could easily add some braces inside the top corners. An easy way would be to use short lengths of matching
Stefania and Dietmar,
Welcome. Your arch looks very neat. To reduce flexing you could easily add some braces inside the top corners. An easy way would be to use short lengths of matching
|
By
jjjk12s@...
·
#28416
·
|
|
freight cost
Hi all,
I have had some success in finding a gearbox and gearbox parts for our main furler. Parts from Amel Carribes and a full gearbox from Riza at Emek.
However the freight from Riza to Fiji is
Hi all,
I have had some success in finding a gearbox and gearbox parts for our main furler. Parts from Amel Carribes and a full gearbox from Riza at Emek.
However the freight from Riza to Fiji is
|
By
Danny and Yvonne SIMMS
·
#28415
·
|
|
Re: [Amel Yacht Owners] Changing oil VP TMD22
I think that is pretty normal, we get 4-5 liters depending on the temperature of the oil.
/Ann-Sofie
S/Y Lady Annila SM232, 1998
Skickat från min iPad
7 aug. 2016 kl. 14:00 skrev osterberg.paul.l@...
I think that is pretty normal, we get 4-5 liters depending on the temperature of the oil.
/Ann-Sofie
S/Y Lady Annila SM232, 1998
Skickat från min iPad
7 aug. 2016 kl. 14:00 skrev osterberg.paul.l@...
|
By
Ann-Sofie Svanberg <kanalmamman@...>
·
#28413
·
|
|
Re: [Amel Yacht Owners] Changing oil VP TMD22
Similar for me Paul,
But I unscrew the oil plug “under” the engine block and am able to get a little more, therefore still not the entire 6 liters.
I am able to bring yogurt or sour cream can
Similar for me Paul,
But I unscrew the oil plug “under” the engine block and am able to get a little more, therefore still not the entire 6 liters.
I am able to bring yogurt or sour cream can
|
By
Alexandre Uster von Baar
·
#28412
·
|
|
Re: Rollbar stability
Wow! Intregated. Came out incredible. Shame it pivots but it can be fixed. Good luck.
Hull #33 Mango 83. Sarqui. Daniel
Wow! Intregated. Came out incredible. Shame it pivots but it can be fixed. Good luck.
Hull #33 Mango 83. Sarqui. Daniel
|
By
Dan
·
#28446
·
|
|
euploia roller photos
By
ste.dente
·
#28414
·
|
|
Re: [Amel Yacht Owners] Rollbar stability
Hello Stefania and Dietmar,
Welcome! There is much knowledge in this group and you will find answers to most of your questions.
We have an SM with 3 solar panels with 450W total capacity built atop a
Hello Stefania and Dietmar,
Welcome! There is much knowledge in this group and you will find answers to most of your questions.
We have an SM with 3 solar panels with 450W total capacity built atop a
|
By
Germain Jean-Pierre <jgermain@...>
·
#28417
·
|
|
Re: Rollbar stability
Haven't seen pics. But common with open fisherman. Bad design you should add 45 degree legs mounted inwards. Your deck bolts will end up ripping out. My humble ingnorant opinion.
Haven't seen pics. But common with open fisherman. Bad design you should add 45 degree legs mounted inwards. Your deck bolts will end up ripping out. My humble ingnorant opinion.
|
By
Dan
·
#28411
·
|
|
Re: [Amel Yacht Owners] Changing oil VP TMD22
Hello JP!
We will arrive to Marina bay Gibraltar 14 or 15 of August
Paul S/Y Kerpa SM#259
Hello JP!
We will arrive to Marina bay Gibraltar 14 or 15 of August
Paul S/Y Kerpa SM#259
|
By
Paul Osterberg
·
#28439
·
|
|
Rollbar stability
Hi guys! We're new in the group and we hope someone could help us.
We've a Santorini; we let doing a rollbar in order to hold 4 solar panels and a wind generator. Aesthetically it's very nice. But if
Hi guys! We're new in the group and we hope someone could help us.
We've a Santorini; we let doing a rollbar in order to hold 4 solar panels and a wind generator. Aesthetically it's very nice. But if
|
By
ste.dente
·
#28410
·
|
|
Re: [Amel Yacht Owners] Re: Upgrading all electronics
Enio,
It sounds like your galvanic isolator is connected correctly. In that case it will not cause nor will it fix this problem.
Not that long ago, Olivier posted an excellent summary of how battery
Enio,
It sounds like your galvanic isolator is connected correctly. In that case it will not cause nor will it fix this problem.
Not that long ago, Olivier posted an excellent summary of how battery
|
By
Bill Kinney <greatketch@...>
·
#28409
·
|
|
Re: [Amel Yacht Owners] Changing oil VP TMD22
Hi Paul,
Sorry to have missed you when you were in Palma… we were only 3 NM away in Portals Nous bay but had poor internet and could not communicate. We are headed west as well and expect to be in
Hi Paul,
Sorry to have missed you when you were in Palma… we were only 3 NM away in Portals Nous bay but had poor internet and could not communicate. We are headed west as well and expect to be in
|
By
Germain Jean-Pierre <jgermain@...>
·
#28408
·
|