Hi again Eamonn, Did you ever get the correct sizes and threads for the boom track aluminum bolts? If not, I will take them out and try to get correct sizes for you. Kent SM243 Kristy

Hi Eamonn, Wandering around Cleopatra we spotted Travel Bug, looking well ! Are you able to tell me where you had her rerigged ? Did you use ACMO rigging ? Were you happy with the riggers

I replaced my gas valve and solonoid as the original was getting very hot when turned on. The new replacement seems to also get hot. Can anyone advise regarding this? Have I mixed the 24v

Hello Paul, Hope that you or another member can also give me some extra advise and helpI am looking firstly at putting 2 solar panels on our rear arch. Can you tell me how your 450w is set up? I have

Hanspeter It looks as you have very little faith in my knowledge about electricity, and you are probably right Physics and Electricity etc, was not a very strong point for me during my studies, but

Ian, Thanks for letting us know that it worked out. I am especially glad that nothing was broken in the process. It amazes me that a few owners like the previous owner of your boat let things like

Kent, they are in the same place on 387, BeBe. CW Bill Rouse, Admiral (Hon) Texas Navy Yacht BeBe +1832-380-4970 Global VoiceMail

Glad to hear it all worked out. Steve

Thanks for sharing Bill !!! Excellent work with the pictures!!! Alexandre --------------------------------------------

Thanks Steve, Bill, Mark and James (did I miss anyone? !). Last night we doused the underside of the collar and bolt holes with PB Blaster and WD40. This morning the marina machine shop fixed the the

Hey :). Looking for some input on what might be a smaller job but I want to see if it's been explored before. At the helm I felt a good sized 'click' in the wheel when making a large steering change.

Mine are on the port side under the berth attached to the aft side of the chain locker's watertight bulkhead. There is a small panel that separates them from the air conditioner. Kent SM243 Kristy

I just replaced the aft head ball-valve for the holding tank drain. The process is documented

European and most of the TVs made for the rest of the world do not work in the USA. When the USA changed to HD it adopted a format of ATSC broadcasting and therefore you need a TV with an ATSC tuner.

Your TV probably only receives the PAL system used in Europe and many other parts of the world. The USA uses NTSC 3.58, and to my knowledge, their is no converter available, and you will need a

Hi Ian, Sorry you are having all the problems with the bow thruster. I helped a good friend overhaul his bow thruster last winter in St Martin. In his case, it had not been serviced for who knows how

Thanks Bill To be fair on the engineer I had removed the lower and upper plates before I gave it to him - but it looks increasingly like the wires need to be moved through 90 degrees. Andrew

Hi Paul whow you can get 8.3 A continious during lets say 10 h in Greek with the Emek Solar installation. This is your calculation with 2.05 KWh/ day. and how you can dived kwh/day ??? Hours/day???

Vi säljer Lady Annila, Amel Super Maramu 1998 Vi säljer Lady Annila, Amel Super Maramu 1998 For English, se below the pictures. Vi har beslutat oss för att ta

I have a much older model than you, but my wires come out the port side of the motor. Bill Kinney SM#160 Harmonie Highlands, NJ