Looks like an Eberspacher fuel pump Ian Ocean Hobo SN 96

I'm overdue for new standing rigging, can anybody give me a ballpark price. Steve / Forever Young / 53 Amel / 272

The Top picture looks like an electric fuel pump.. often used in diesel heaters. Chris Amarok SM285

Hi It looks like it is the vaccum sensor. If só, It triggers an alarm if/when the main seawater inlet is clogged. Em sex., 10 de dez. de 2021 às 13:37, Jarek Zemlo via groups.io

Hello, after organising my spares I found 2 items that previous owner did not described. Any ideas what it is? Thank you in advance Jarek SY NOA BLUE SM 201

In the same vein as Geovanni, I had a windlass cover made from super Sunbrella. Only removed when anchoring or lifting anchor and always reinstalled once at anchor. Jean-Pierre Germain, Eleuthera,

We placed cut-t0-size spun furnace filter material over the inlet. Low resistance and easy to clean with water. Air flow is very good. Avaiable in most hardware stores. We also replaced AC

Il 09/12/2021 15:31, Dan Carlson ha scritto:

I will try, but first I need to borrow an unused new gear from someone. Hoping I find one...I know there are several out there. Bill

Hi Bill We tried to email the Swiss guy 4 times with no reply. We would really appreciate it if you can have the furling gear fabricated by another source. We appreciate your efforts to assist with

Dan, Here are my thoughts: There is a possibility that it might be a friction spark. There is a possibility that it could be static electricity. It could even be a 230VAC item on your boat which is

Hello all, I'm looking for Anchor Windlass troubleshooting and tips. My anchor Windlass has sparked where the chain links bounce against the steel around the bow roller when raising or lowering

I have recently given out the contact information of the Swiss guy who owned the machine shop that made the genoa furler for Amel. Apparently, he has gotten greedy and is quoting outrageous prices for

Ditto to Geoff’s remarks Bill, thanks for this wonderful group you maintain and ardently support. We don’t YET own an Amel SM, but through your forum are learning so much. -- Rachael & Robin

FYI, the Raymarine rotary drive was a noise box when new. Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas 77550

Same back to you Bill from Down Under and sincere thanks for all that you and this site have offered this past year. All that you and this site provide, and the terrific contribution from members,

David, I feel your pain! I never ran into that particular problem in that place, but I have an idea or two for you. Rather than using the long version of the "EZ Out" try the shorter ones, usually

Hi Kevin, You can buy the gears from Raymarine. I carry a set on board. Jean-Pierre Germain, SY Eleuthera, SM 007, NZ

Hi Kevin, It’s not supposed to be that noisy. We had a similar issue, maybe not as noisy but still too noisy. It turned out that one the pin/axis of one of the planetary gears was slightly dislodged

Hey folks, I’m attempting to troubleshoot my secondary (backup) autopilot behind the helm station. It works but is noisy as all get out and believe it needs some loving.(Hopefully it’s not