Thanks Jeremy, if it is the UK register maybe any SM owner who needs UK registration can use this figure instead of having to get the calculations done?? Kind Regards Danny SM 299 Ocean Pearl

Hi Bob and Alan, have to agree, very hard to get the three rings in. Last time I left it at two and months (a year maybe) later when a bit of seep happened I added the third. As the old saying goes

I have a fairly laid back attitude to the washing up routine. We wash dishes normally, I manually pump the bilge every couple of days. I can not go along with the idea of wiping down with paper

I was thinking of something like in this video https://replaceyourgarbagedisposal.com/why-you-need-it-restaurant-garbage-disposal/no-grease-trap-clogs-commercial-garbage-disposal/ -- Paul

Instead of exiting the galley sink with a thru hull, why not just have a fitting a few inches above the waterline like they have on all the early Amel‘s and lots of other boats? Ron

Paul , When we bought Pen Azen as a new boat we had Amel add a short length of stainless pipe to the hole where the forward drain spills into the bilge . That allows us to cover the end of the pipe

A lot of really helpful information has been written and shared about converting to lithium batteries and the benefits thereof (thank you all). Compared to my experience 20 years ago, when I lived

Has anyone considered interjecting something akin to a grease trap between the sink outlet and the drain pipe leading to the bilge? Inserting such a device could result in collecting food rescue etc

Hi Danny This looks very much like the carving format for the UK Shipping Register Part 1 - we recently registered our A50#42 and we were required to mark her as ON 180370 NT26.19 (the tonnage being a

Hi All, Has anyone used the Volvo impellor removal tool? I want to get one but FYBMarine in the UK list it as being for impellor p/n 21951352 whereas my impellor is 22307636, although it does have

We all have our own technique for dealing with the bilge. We clean every dish with paper towels before washing up, going through countless rolls of paper every season. Then I put 150 g of

😩 Verstuurd vanaf mijn iPad

I also need to replace the rudder packing on my Mango. Any fellow Mango owners that know what size they used?

Oh, and by the way, the moon loved it so much he came out especially to have a peek ! -- ian and judy jenkins penazen@...

Guys 'n Gals, Here are some more pics of our hard top. What they may not do justice to is the really neat rope bolt track all round the hard top, just in from the edge. You hardly know it's

NAPA Auto Parts in the USA sells a 5 gallon pail for about $75 US. That's about the same price as buying 9-10 liters/quarts. Best regards, Daniel Carlson on sv BeBe, SM #387.

Paul, The packing can be really tough to pull out, but with the right tool it can come out. A purpose made packing extractor is the best tool. like this: https://amzn.to/3BZQhAF Use the largest size

There is far better now as the Doradus 5.1 . Antenna on spreaders of the mizzen mast and internal antenna in the galley Envoyé de mon iPhone

Hi, do you have some pictures of how and where Amels places the pepwave and the antennas? Thanks! Joan Amel 55#05

Hi Drew, Thank you for your advise. Well appreciated. Will work with that, especially the preparation of the watermaker and the A/C units was good to know. Eric Opdeweegh sv Abayomi SM 158 currently