Ben, OK, you know how difficult it is to diagnose something by email, but, I will risk being wrong: Your problem is centered around the High Pressure pump motor. I am going to guess that the pair of

Do you know how much current the water maker is drawing just before it shuts down? Fair Winds Eric Kimberlite Amel Super Maramu #376

Dessalator 160 causes generator to shutdown but no breakers thrown. I can run all - 3 airs, charger, washer - simultaneity. But when Dessalator is turned on generator shuts down. No breakers on

Ian, Several years ago I bought a spare Actuator, Governor fir the Onan because I believe the only way to check if you have a problem is to replace it. If you were here, well you know!. Also, when

When did you last change the fuel filter on the ONAN ? That could be the problem..... Cheers Alan Elyse SM437

You can use a small hand pump with a small dia. tube to extract the oil via the filling cap. It takes 500 ml of 90 grade oil....there is a sight glass on the front of the windlass where you can see

Hi Ian, Windlass-You remove the fill cap and use a hand pump to remove the old oil. The oil is SAE 90-140, .5 liters as per the attached link.

I want to change the oil in my Lofrans. How can you drain the old oil ? How much to refill -- can you overfill the oil reservoir ? Ian and Judy, Pen Azen, SM 302, Greece

Hi all, My 7 KW Onan, reliable for 16 years with about 5,000 hours on it, has developed a fault with ( we think) the speed control. This is the part of the engine which governs the

Hi Bill, Thanks for the advice. I did use the halyards. One to support the furler extrusion and one to pull the mast forward. In the age of the iPhone I took some images to help with the reinstall. I

Hi Craig, Thanks for that. The wire in the railing goes through the tensioner…… :( I have it all off now and the furler is on the bench with the gearbox awaiting surgery…. Just need to get it

Hello Vladimir, There is an excellent source of information here... http://coxengineering dot sharepoint dot com/Pages/Anchoring.aspx Jean-Pierre Germain SY Eleuthera, SM 007

Thanks John. We will be at your shop on Thursday at 11am. Look forward to meeting you. Cheers, Warren and Zetta Sent: Monday, 30 May 2016 12:38 PM To: amelyachtowners@... Subject:

Eric has a Santorin, not sure of hull number. No air conditioners, so most likely the bow thruster. There are some good instructions on how to tweak the tension on the cable, I think in the files

Warren and Zetta, I am at sea on Tuesday but should be around on Wednesday to Friday between 9 and 3. I'm normally coming and going so the office can contact me and best if you give me some

Hi John. We missed you when we visited Port Douglas the other week. You were out sailing of all things. Wondering if there is a day this week that we could catch up with you and have a look over

Thanks Bill.

Vladimir, I may be wrong, but I think that you have two options that you may not have considered: Buy a new gypsy from Lofrans to match the 31mm pitch...I think that Lofrans makes 3 different 10mm

Eric, You may get better responses if you explain the year and model if your Amel and whether or not you have a bow thruster. AND, what you have investigated and eliminated. This is not the first

Please let know the year and model of your AMEL. Without it is hard to help you. Fair Winds Smooth Sailing To All Capt Richard RP Yacht Brokerage Newport RI We list sell and service fine yachts