|
Re: lithium battery warning
Hi
Here is a youtube video that tests the risk of Lithium batteries and fire:
https://www.youtube.com/watch?v=Qzt9RZ0FQyM&ab_channel=GWL
Does anyone know of a specific case of fire on a boat because
Hi
Here is a youtube video that tests the risk of Lithium batteries and fire:
https://www.youtube.com/watch?v=Qzt9RZ0FQyM&ab_channel=GWL
Does anyone know of a specific case of fire on a boat because
|
By
Lior Keydar
·
#60432
·
|
|
Re: SM2K Sail Drive Water Ingress (minor)
Rick,
Can you see where the water is coming from? or just that it is accumulating at the base of the C-Drive? Other sources of water are more likely, especially if the hose clamps are snug. It is a
Rick,
Can you see where the water is coming from? or just that it is accumulating at the base of the C-Drive? Other sources of water are more likely, especially if the hose clamps are snug. It is a
|
By
Bill Kinney
·
#60431
·
|
|
Re: What to do with LiFePO4 batteries when the boat is layed up?
Dean,
I have the benefit of the batteries being new, having the equipment in the box for battery monitoring and still being a land lubber with too much electrical test equipment on a work bench.
Dean,
I have the benefit of the batteries being new, having the equipment in the box for battery monitoring and still being a land lubber with too much electrical test equipment on a work bench.
|
By
Matt & Michelle
·
#60430
·
|
|
Re: Main Outhaul gearbox ware to buy
HelloThanks for the help
Kind Regards
Med Vänlig Hälsning
Peter Attinge
HelloThanks for the help
Kind Regards
Med Vänlig Hälsning
Peter Attinge
|
By
Peter Attinge
·
#60429
·
|
|
Re: AMFA bilge pump spare part
Oliver, that is good information, but not complete because there are more than 1 Bosch model at 24 volts on eBay.
Do you know which one?
5 results for bosch wiper motors for 24v
Save this
Oliver, that is good information, but not complete because there are more than 1 Bosch model at 24 volts on eBay.
Do you know which one?
5 results for bosch wiper motors for 24v
Save this
|
By
CW Bill Rouse
·
#60428
·
|
|
Re: SM2K Sail Drive Water Ingress (minor)
Hi Rick,
Sounds familiar, replacing the big hose clamps on the hose of the C-drive top: but still water collecting there.
In my case the water turned out to come from the aft shower drain.
In my case
Hi Rick,
Sounds familiar, replacing the big hose clamps on the hose of the C-drive top: but still water collecting there.
In my case the water turned out to come from the aft shower drain.
In my case
|
By
Stefan Jeukendrup
·
#60427
·
|
|
SM2K Sail Drive Water Ingress (minor)
Hey everyone we splashed last week after an extended stay on the hard and noticed a minor leak around the base of the sail drive, where the shaft passes through the hull. When I say minor leak, I mean
Hey everyone we splashed last week after an extended stay on the hard and noticed a minor leak around the base of the sail drive, where the shaft passes through the hull. When I say minor leak, I mean
|
By
Rick Stanley
·
#60426
·
|
|
Re: Opacmare - replacing sensor
Don’t know if my experiences can be of any help in this matter but sharing can’t do any harm. .
Our pasarella did also very strange, it was going in and out by itself without any reason or
Don’t know if my experiences can be of any help in this matter but sharing can’t do any harm. .
Our pasarella did also very strange, it was going in and out by itself without any reason or
|
By
Laurens Vos
·
#60425
·
|
|
Re: SM cockpit upholstery
#solution
Hello,
I have put my mainsail
boom 13 cm upper , with the welding of a new aluminium part . The technician stay in Greece, at Chalkida.
And now, it is very great to stay up below the bimini. The
Hello,
I have put my mainsail
boom 13 cm upper , with the welding of a new aluminium part . The technician stay in Greece, at Chalkida.
And now, it is very great to stay up below the bimini. The
|
By
André PETIT
·
#60424
·
|
|
Re: AMFA bilge pump spare part
Thanks, Jose ,
Can't beat the Italians for some of their engineering.
Many years ago on a non-Amel boat when a Simpson Lawrence anchor winch ( good Scottish make ) seized a bearing on the fourth
Thanks, Jose ,
Can't beat the Italians for some of their engineering.
Many years ago on a non-Amel boat when a Simpson Lawrence anchor winch ( good Scottish make ) seized a bearing on the fourth
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#60423
·
|
|
Re: AMFA bilge pump spare part
Hi
I bought 6 months ago a new pump and spare parts directly from:
TF MARINE SRL
Lucca – Italy
Tel & Fax: +39 0584 338238
website: www.tfmarine.it
email: info@...
José
Hi
I bought 6 months ago a new pump and spare parts directly from:
TF MARINE SRL
Lucca – Italy
Tel & Fax: +39 0584 338238
website: www.tfmarine.it
email: info@...
José
|
By
Jose Alegria
·
#60422
·
|
|
SM cockpit upholstery
#solution
Good morning Amelians,
Any suggestion for a comfortable and practical upholstery for the SM cockpit? I saw one Delos Chanel an interesting solution, but I cannot identify the type of material
Good morning Amelians,
Any suggestion for a comfortable and practical upholstery for the SM cockpit? I saw one Delos Chanel an interesting solution, but I cannot identify the type of material
|
By
JOSE PRIETO
·
#60421
·
|
|
Re: AMFA bilge pump spare part
Thank you to everyone for so many responses .
Who needs google when we have this site ?
Ian and Judy, Pen Azen , SM 302,
Leros
Thank you to everyone for so many responses .
Who needs google when we have this site ?
Ian and Judy, Pen Azen , SM 302,
Leros
|
By
ianjenkins1946 <ianjudyjenkins@hotmail.com>
·
#60420
·
|
|
Re: AMFA bilge pump spare part
Hi Ian,
You can check my earlier posts from a few years ago about repairing the plastic wheel - I had to repair it twice in 20 years, last time maybe 10 years ago - still working fine!
--
SN68
Hi Ian,
You can check my earlier posts from a few years ago about repairing the plastic wheel - I had to repair it twice in 20 years, last time maybe 10 years ago - still working fine!
--
SN68
|
By
Craig Briggs
·
#60419
·
|
|
Re: Companion way hatch door removal
Bernd,
On my SN I used a filet knife to cut the sealant of the windscreen/dodger, lifted it with a halyard enough to remove the hatch door. I replaced it with a plexiglass door - fantastic to brighten
Bernd,
On my SN I used a filet knife to cut the sealant of the windscreen/dodger, lifted it with a halyard enough to remove the hatch door. I replaced it with a plexiglass door - fantastic to brighten
|
By
Craig Briggs
·
#60418
·
|
|
Re: AMFA bilge pump spare part
Hi Ian,
I received one from Maud at Amel about 3 weeks ago. You might also consider getting the 2 flapper valves.
Fair Winds,
Eric
Hi Ian,
I received one from Maud at Amel about 3 weeks ago. You might also consider getting the 2 flapper valves.
Fair Winds,
Eric
|
By
eric freedman <kimberlite@...>
·
#60417
·
|
|
Re: AMFA bilge pump spare part
Hello, there are BOSCH wiper motors for 24V that work perfect to replace the original motor and gear. Just look at ebay. Cost about 50 euros plus shipping in Europe.
Oliver from Vela Nautica
A54#39
Hello, there are BOSCH wiper motors for 24V that work perfect to replace the original motor and gear. Just look at ebay. Cost about 50 euros plus shipping in Europe.
Oliver from Vela Nautica
A54#39
|
By
Oliver Henrichsen, SV Vela Nautica
·
#60416
·
|
|
Re: AMFA bilge pump spare part
About a year ago Maud had these.
Riza in Turkey at Emek Marin had the gear the last time I checked
Reya stopped making the Marina ZZ pump some time ago.
When Reya stopped production TF Pumps began
About a year ago Maud had these.
Riza in Turkey at Emek Marin had the gear the last time I checked
Reya stopped making the Marina ZZ pump some time ago.
When Reya stopped production TF Pumps began
|
By
CW Bill Rouse
·
#60415
·
|
|
Re: Installing membranes
The brine seal allows only 1-way insertion.
CW Bill Rouse
The brine seal allows only 1-way insertion.
CW Bill Rouse
|
By
CW Bill Rouse
·
#60414
·
|
|
Re: Companion way hatch door removal
I lifted my hatch 1/2 way, cut it in two horizontally, installed a piano hinge and voila! It take me 5 minutes to remove and reinstall my hatch. Pictures are on the Amel site but contact me and
I lifted my hatch 1/2 way, cut it in two horizontally, installed a piano hinge and voila! It take me 5 minutes to remove and reinstall my hatch. Pictures are on the Amel site but contact me and
|
By
william reynolds
·
#60413
·
|