Thank you Alexandre Will report back, but hope we can postpone until lay up, we had the elbove cleaned a year ago in Turkey, will probably do as you buy a new one and keep the old as spare. Paul

...what a surprise ! Now we are at home, Lido, and the boat at Richard Bay South Africa. On next 7 January we fly back on board. We have days very very busy ....Christmas, spare

Good morning Paul, So glad to be useful on the forum !!! Here is the link: http://nikimat.com/onan_exhaust_elbow_replacement.html I need to work on my own web site one day, to make information

Alexandre I might have to fix my elbow as well, but can,t find the ilustration, as you ilustrations are of very pedagogical and high standard an my mechanical skills are limited it would be of great

Does anybody with a SM use a Parasailor from Istec and if yes what are the experiences, how often do you hoist it and what is the size? fair winds Robin ASM #56 GrosDoux www.gros-doux.com

Good morning Mark, Bill, Kent, John and Derick, Thank you for your prompt reply! As soon as the rain stops I will use a heat gun and razor blade, etc. Hope you have a great day, sincerely,

Great, Colin! Thanks! Kent Kent Robertson S/V Kristy karkauai@... Panama cell: +507-61171896 USA cell: 828-234-6819 On Dec 18, 2016, at 2:28 AM, SV Island Pearl II colin.d.streeter@...

Kent I'll send you a picture of the same unit I've just installed on Island Pearl II last week where you can clearly see how Quick have added this bypass valve and pipe to the standard Quick B3 units

Sorry guys, my mother tongue isn’t English and I chose the exact oposite wrong word inmy message yesterday. I need to replace my downwind sail and wanted to ask the forum forrecommendations. I

Like John Hayes, I found that a little solvent was useful after peeling off the old letters. I used ethanol to good effect (on the glue residue, not me). Without using the solvent I found that dirt

Ciao Giovanni, Sì, siamo nella Compagnia della Vela a San Giorgio Maggiore da un mese. E-mail: svperegrinus @ yahoo . com Peregrinus SM2K N. 350 Venice, Italy

Hi All, and Happy Holidays! I'm going to add a mixing valve to my 40L Quick Nautic Boiler B3 as described in earlier posts. I used some reinforced vinyl tubing as a temporary fix and want to replace

Hi all I am in the process of changing the name of my yacht from Baracca to Nga Waka Baracca was a vinyl lettering on metal boom and stern fibreglass I used a heat gun on low heat and a plastic

Hi Alex, it wasn't me. The paint underneath your lettering will not be sun-bleached like the surrounding paint. I chose to remove the old decal lettering with a razor blade, and used rubbing

If you have vinyl letters rather than paint, you should try a heat gun. Not too hot to burn the gelcoat. The gelcoat under the letters will appear a different color because the vinyl has blocked the

Alexandre, If the lettering is vinyl, you should be able to peel it off using a single edge razor to get a corner started. Wetting it as you peel will help. If it is painted on, oven cleaner

Good afternoon, Not really an Amel related question, but on my Amel… I am changing the “Port of Call” of the vessel, so need to remove the old lettering, Any advice? What product to use? I

Thanks Bill and Mark. I will ask Santa if he’ll put some under our tree, next year. With best regards, Mark Super Maramu 2000 Hull #275 www.creampuff.us Currently cruising:

Mark, Ours were from Qsails also. And ditto everything Mark Pitt said. There are several other SM owners that report the same. Tahsin Oge ships his sails worldwide and is the loft for Hood Sails.

Do you think Kent may have a long shaft outboard engine. If so, I do not believe it will fit Bill Rouse BeBe Amel 53 #387 Sent from my tablet +1832-380-4970 USA Voice Mail