Well done Eric. How often it is the simple answer Danny SM 299 ocean pearl Sent from my Vodafone Smart On Oct 25, 2016 4:23 PM, "'sailormon' kimberlite@... [amelyachtowners]" <amelyachtowners@...>

Hi Kent good to see your name up again. I was wondering where you were. Danny SM 299 ocean pearl Sent from my Vodafone Smart On Oct 25, 2016 4:45 PM, "Kent Robertson karkauai@... [amelyachtowners]"

Kent, Thanks Eric

What a sleuth! You da man! Kent Robertson S/V Kristy karkauai@... Panama cell: +507-61171896 USA cell: 828-234-6819 .

My MDKAV had numerous fault signals. My genset would run for 30 seconds and stop. First low oil pressure—changed sender— Now new fault code- no fuel- changed fuel pump- Another fault

Hello Trevor, On our Santorin we have a 6kw Northern Lights generator (we run it at 110v or you can run it at 4.8kw @ 220v). We also have a 110v, 18,000 Btu A/C. The Genset is just to port of the

Ooops, my bad. Typing before morning coffee... Dessalator says 1% Sodium bisulfite in 20% glycerine for storage and freeze protection.

For freeze protection Dessalator say 1% SMBS in 20% glycerine. Not glycol.

Do these products protect the system from freezing ? I need to store the boat on the hard for the winter , so I cannot flush it with fresh water weekly .I know people that use potable antifreeze . Is

Eric, Onan uses at least 10 different PCB boards and you need to look for the part number you need. BeBe #387 has Onan PCB board 300-5521. Your PCB may be different than mine. I checked ebay and there

James, to set the record straight I do not own a 55 however I've done a lot of miles as a captain. They Point high in the low 30's run will down wind. The relocation of the batteries, water tanks,

Thank you for the feedback much appericated it. Sent from Yahoo Mail. Get the app On Saturday, October 22, 2016 6:43 PM, "ofer magen ofermagen@... [amelyachtowners]" wrote:

Does anyone know of a source of a reasonably priced PCB board part number 327-1533 for an Onan generator model MDKAV ? Fair Winds Eric Kimberlite Amel Super Maramu #376

Yep, readily available from your local Home Brew Shop, cheers! Best Regards Barry & Robyn Tradewinds III SM 171

OK, Here's what I got from Dessalator... Dear Sir, Thank you for your message. For the sterilization we use Sodium metabisulphite HP (see specification sheet enclosed and procedure). You need

Installation of a bilge pump alarm was one of the first improvements that I implemented on my boat. That is very importent safety related improvment. It is ezy to implement and inexpensive. I just

Ofer, When Amel joins hoses in the pressurized fresh water system, they use not only some sort of glue, but also 2 clamps. You may know why they do this now. Regarding your gray water pump, I assume

Hi to all, A year ago when I was in Gocek turkey, I asked a carbon filter to be installed. In August on the way from Cyprus to Finike, the new hose that was installed has failed and we lost all the

Richards, I am very glad to hear that you are so happy with your Amel 55. While that boat is out of my cruising budget, it is great to know that Amel is still building boats that make owners

The new 55 AMEL is a wonderful sailing and live aboard yacht of the moderne era she's easy to in the sea way and comfortable on the hook. I know this as I've got over 1500 miles aboard doing and ocean