I bought the standard R5 "trim tab" anode and the bolt is pretty small compared to the present bolt - about 1/2" according to the diver. Can someone give me a source for a suitable

Vladimir, with your 75 H.P. engine, if you have a Max-Prop, that speed and RPM are about right, well within the range. If you have an Auto-Prop, the RPM are about 600 slower and that speed is a bit

Help Sorry to butt in on the wrong topic, but I can't log in to the Yahoo address any more. I have tried all the passwords I ever possessed. The only way Yahoo offers help is to send me a message on

Joel, Max RPM is 2900 at 8.2 kn speed. Is this OK?

The German supeyer SVB have this https://www.svb.de/de/aqua-signal-led-dreifarben-ankerlaterne-serie-34-schwarzes-gehaeuse.html#more_info Elja Sy Balu Super Maramu 222

Hi Gary, I tested the ability to use the "Imported from yahoo Group/Imported messages" board. I can read and search as a charm in the html format. When I try to access the PDF file I get an "Error

Danny, Thanks! This is very reassuring. Perhaps I’m over thinking this a little bit. One more question: do you remember what tool you used to separate the copper tube from the fiberglass

Hi Mark. It was on the tube from the toilet to the tank. Someone else had posted about replacing it and I used their advice. It was about 5 years ago so I don't recall the details except that I had to

Hi Attilio An unrelated question: are you staying in the new marina in Rhodes? We would like to stay there over winter next year. Thanks for any info. Gerhard Hoffmann Pepino SM381 Evia, Greece

Thanks Danny! Was your leak on the input side of the tank? Did you run into any issue with the fitting inside the tank? Also, removing the old copper fitting – how was this done? Twisting and

Hi Mark, I had same problem a few years ago. I was able to remove the copper pipe from the bottom of the tank. I found a plastic spear the right size fitting with a threaded end that was a tight fit.

Also NASA Marine, in Europe, has a product like this, see at http://www.nasamarine.com/proddetail.php?prod=Supernova, much less expensive. I have it, not fitted yet. Attilio & Maria Siviero Amel

As an afterthought on this, does anyone know if the holding tank is removable? With best regards, Mark Super Maramu 2000 Hull #275 www.creampuff.us Currently cruising: Green Turtle

Anybody have a copy of the manual they could upload to the forum for the Fakir Hobby S heater? Bill Maffei SM #195 It's all Good

Looking inside the tank, there is a U shaped hose attached to the inlet to push the waste upward. Does anyone know if this is the same copper tube (meaning the tube would be one piece and sleeved

SV Delos has made 3 youTube films about changing the rig. I have only seen the third (lack of internet.....) It is well worht seeing! Here is a URL to the third episode, the other two you can easily

Gary, Well done. Thanks for your efforts. Mike Neale

Hi Graham, If we go to the new board, it is a completely autonomous system so there will be no connectivity to Yahoo at all. A new registration altogether. The good thing is that the user names are

Gary, Do I make a completely new registration or do I use the username and password that I use for Yahoo groups? Regards Graham M240 "Jamesby"

Hi Mark, Yes, I've seen that too, but I'm sure the Manufacturer's specification of 10 to 28 volts is correct and the resellers have mistakenly posted it as 12 v through lack of familiarity with the