Good morning Joel, It is quite unusual I don’t use it for so long, but thanks so much for the advice !!! Learnt something else !!! Yes definitely red wire the engine key! Always thankful to your

Thanks Joel! I hadn't heard that one before. You da man! Kent

Alexandre, if you will not be using the boat for weeks or months. Place two heavy duty BLACK/NOT CLEAR garbage bags over the prop and secure them very tightly with some plastic wire ties on the space

I thought I should share this (beginner and little embarrassing) experience to help all the new owners like myself. Yesterday wanted to do an engine run, since I had not used it in a month. Once in

Hi Judi and Bill cogatulatiob to end your circumnavigation. Thank you for your knowledge In the Forum, and I,hope you share it for a long time Elja SY Baloo SM 222 Messolonghi-Greece

http://coxengineering.sharepoint.com/Pages/Sailsandrig.aspx Look here in the anchoring section... Huge information. I went 8 MM G70 grade; you will understand when you read... Jean-Pierre

I think that is not a option, the loss of diameter is partly abot 40%. But I will check the conversations to learn more about that. Thx Peter SY WILSON SM 003 La

Bill, We hope you will join the group in the future, too and give us a of good advice of your treasure trove of experience. We had the luck to meet you twice, in Fethiye and Lanzarote. And both times

Bill, In the short time we have owned our Amel, you have given us expert spot-on guidance many times saving us us untold hours. You will be greatly missed. Best wishes to you and Judy. Ben and

Looking forward to meet both of you next year. Sincerely, Alexandre SM2K #289 NIKIMAT Club Nautico de San Juan, Puerto Rico --------------------------------------------

I just changed the two membranes but on top of need to change the o rings, you may need to ask dessalator a spare tube connector ( a little pice of metal with 4 o rings). When I removed the heads, I

Bill, Really sad to read that you are swallowing your anchor, though we shouldn't be--rather we will remember the great joy that you have had from owning an Amel and the huge debt that the rest of

OK, I am fairly sure that your Dessalator 60 liter watermaker requires 2 each of the SW302521. That would be a dimension of 2.5" and 21" long. Maybe another owner with a 60 liter can verify that

All good, whew amazing what a bit of maintenance does especially after not being used for so long, TDS 187. Good reference information from this post just in case in the future. Thank you all Kind

Bill you have made an enormous contribution to the owners forum, we all owe you a huge debt of gratitude. Yvonne and I met you in Opua New Zealand when we were looking for a boat. Your enthusiasm for

I just changed my membranes, I confirm the model is sw30-2521 for the duo60 from FilmTec. Best regards.

Hi, I believe this is the correct size used for the Dessalator 60; http://www.lenntech.com/Data-sheets/Dow-Filmtec-SW30-2521.pdf BR Niels

Hi Dan and Lori, Congratulations! There will be many Amel owners in the Carib at the time you take ownership. Enjoy a wonderful boat. Fair Winds Eric Kimberlite Amel Super Maramu #376

I especially want to thank Bill and Judy for helping Lori and I become Amel owners. We were well on our way to buying an Amel when much to our surprise and delight we learned of the opportunity to

Yes I have tried to download the PDF but have access forbidden, from what I can see so far, the membrane is Membrane type 25.21 (30 to 100 L/H range) (100015) But not sure without contacting