The email address was removed by Yahoo. It is Christian Schabauer is theguy with the parts and is located in Austria. He only speaks German. His email is: office (at) schabauergmbh (dot) at

Alexandre, It is probably a good idea to unplug the unit from the outlet under the sink J We had an issue similar to yours. The heating element in the unit burned out or shorted. The unit

Good afternoon, 2 weeks ago, I used the Eumenia dishwasher, after the cycle was finished (and light off), I heard like a muffled explosion… I open the doors under the sink, didn’t see anything,

Congratulations to Bill and Judy on your award and your 10 year great adventure. A life well- lived. Ben and Gayle La Bella Vita SM #347

Yes, all holes at the edge of the zinc on a Max-Prop. Bill

Hmmm. On the MaxProp, all the holes are at the edge Kent

Great to know it works! Thanks, Bill. Kent

Kent and Bill, Good suggestion. One I had read about before and I have painted the area around the bolt holes with nail polish. The hole in the prop zinc is right dead center where

Kent, I have used Max-Props for almost 20 years. I'll second the comments of your diver about painting the bolt holes. One of the exciting things that can happen with these end cap zincs is for two

Congratulations from "Noa" as well! Kind regards, Walter (Noa, SM2K 436)

Interesting tip !!! Alexandre --------------------------------------------

Hi all, The design of the prop zincs is such that the thin zinc around the edges at the bolts erodes away at the same rate as the bulk of the anode. When the thin edge is gone, the bolts have nothing

Hi Bill, Your theory would certainly explain the facts. However, AMEL uses zinc prop anodes instead of the red plastic cap on the Amel 54 and I have not heard that the bonding system on the 54 is

Thanks Giovanni We did manage to source one from Quick's new Australian dealer here in Brisbane. Trust you are enjoying La Reunion and the Indian ocean islands. We hope to be there next year

thanks to all for your comments, I will order the 127mm from SVB, if they fit I will let you know, if not I will drill :-) herbert KALI MERA, SN120, Trinidad

Peggy and I join in the applause for Bill & Judy...well done! Duane Wanderer, SM#477

Interesting theory. Makes sense to me. That's why you're the sailor of the year! Kent Robertson karkauai@... 828-234-6819 voice/text On Sep 17, 2016, at 9:17 PM, 'Bill & Judy Rouse' yahoogroups@...

I have always believed that if you have multiple zincs connected in series, that the zinc closest to the protected items will be the first to dissolve. The zinc on the prop would be the closest zinc

Well done Bill and Judy...hearty congratulations !! Cheers Alan Elyse SM437

Here here! You are an inspiration to us all Cheers and congrats! With best regards, Mark and Cindy Super Maramu 2000 Hull #275 www.creampuff.us Currently cruising: Tampa Bay