|
Re: Amel 55 Hardtop & Mainsheet question
You‘re welcome Bill. And I didn’t mean bingos (whatever that is). But bungee. The dangers of technology. Cheers Joerg
You‘re welcome Bill. And I didn’t mean bingos (whatever that is). But bungee. The dangers of technology. Cheers Joerg
|
By
Joerg Esdorn
·
#60234
·
|
|
Re: Gas struts for cockpit access
Ron,
I am working on installing gas struts. That cockpit floor is getting heavy.
I'll send you the specs of the struts I picked and the location (tried a couple of spots, did not work).
--
John
Ron,
I am working on installing gas struts. That cockpit floor is getting heavy.
I'll send you the specs of the struts I picked and the location (tried a couple of spots, did not work).
--
John
|
By
JB Duler
·
#60233
·
|
|
Re: B&G Sonic Speed sensors replacement
Gary, excellent description and encouraging, thanks. I too have been feeling nervous about tackling this job but your description is great and the above waterline cable exit is reassuring (I'd expect
Gary, excellent description and encouraging, thanks. I too have been feeling nervous about tackling this job but your description is great and the above waterline cable exit is reassuring (I'd expect
|
By
David Crisp
·
#60232
·
|
|
Re: Shore - Generator Switch-over box on A54
#solution
Hi Reudi;
I agree. I was just trying to point out that this chaining of inverter/charger approach has the possibility of almost matching the generator output with units that are manageable in size
Hi Reudi;
I agree. I was just trying to point out that this chaining of inverter/charger approach has the possibility of almost matching the generator output with units that are manageable in size
|
By
Mohammad Shirloo
·
#60231
·
|
|
Re: Shore - Generator Switch-over box on A54
#solution
Hi Ruedi,
Sorry to barge in like this but I actually installed the MV Mass Combi Ultra 24/3500 as well so maybe you want to know what I did as well.
In the later 54's the MV inverter is actually
Hi Ruedi,
Sorry to barge in like this but I actually installed the MV Mass Combi Ultra 24/3500 as well so maybe you want to know what I did as well.
In the later 54's the MV inverter is actually
|
By
Arno Luijten
·
#60230
·
|
|
10 photos uploaded
#photo-notice
The following photos have been uploaded to the Sonic Speed Sensor Replacement SM album of the main@AmelYachtOwners.groups.io group.
Sonic Speed Computer Cable Removal &
The following photos have been uploaded to the Sonic Speed Sensor Replacement SM album of the main@AmelYachtOwners.groups.io group.
Sonic Speed Computer Cable Removal &
|
By
main@AmelYachtOwners.groups.io Notification <noreply@...>
·
#60229
·
|
|
Re: B&G Sonic Speed sensors replacement
You can find the photos Gary mentioned at https://amelyachtowners.groups.io/g/main/album?id=268273
You can find the photos Gary mentioned at https://amelyachtowners.groups.io/g/main/album?id=268273
|
By
CW Bill Rouse
·
#60228
·
|
|
Re: Amel 55 Hardtop & Mainsheet question
Joerg, thanks for that
CW Bill Rouse
Joerg, thanks for that
CW Bill Rouse
|
By
CW Bill Rouse
·
#60227
·
|
|
Re: Tinkling Sound
Interesting factoid
As we get older we loose high frequency hearing, as this is often an assymetric our localisation skill for sound deteriorates.
A child or very young adult can often localize far
Interesting factoid
As we get older we loose high frequency hearing, as this is often an assymetric our localisation skill for sound deteriorates.
A child or very young adult can often localize far
|
By
Paul Harries
·
#60226
·
|
|
Re: Lithium Battery BMS
Willem,
I know about the Chinese battery option which is extremely cheap compare to a more integrated solution. But since my boat is in the Caribbean at the moment I am looking for a solution I can
Willem,
I know about the Chinese battery option which is extremely cheap compare to a more integrated solution. But since my boat is in the Caribbean at the moment I am looking for a solution I can
|
By
Juan de Zulueta
·
#60225
·
|
|
Re: Tinkling Sound
Hi Kent and Iris. This is actually a common phenomenon. I’m am all but sure if you slack your jib halyard this resonance will disappear. This has happened to me and many others as well. If that
Hi Kent and Iris. This is actually a common phenomenon. I’m am all but sure if you slack your jib halyard this resonance will disappear. This has happened to me and many others as well. If that
|
By
amelforme
·
#60224
·
|
|
Re: LED under cabinet lighting
We added 24 volt single color LED’s with a dimmer. They are working great – as said before, a HUGE difference. I choose 36 LED per foot to avoid any shadowing. I used the adhesive back to mount
We added 24 volt single color LED’s with a dimmer. They are working great – as said before, a HUGE difference. I choose 36 LED per foot to avoid any shadowing. I used the adhesive back to mount
|
By
Mark & Debbie Mueller
·
#60223
·
|
|
Re: B&G Sonic Speed sensors replacement
Hi Michele:
I will echo what Jason Rutledge posted and perhaps amplify the procedure. I provided about a dozen photos to Bill and perhaps he will post them if he hasn't done so already.. Jason and
Hi Michele:
I will echo what Jason Rutledge posted and perhaps amplify the procedure. I provided about a dozen photos to Bill and perhaps he will post them if he hasn't done so already.. Jason and
|
By
Gary Silver
·
#60222
·
Edited
|
|
Gas struts for cockpit access
The gas struts that assist opening the cockpit floor and holding the hatch open are seriously deteriorated on my boat. Rather than reinvent the wheel, I was wondering if anyone has found a source and
The gas struts that assist opening the cockpit floor and holding the hatch open are seriously deteriorated on my boat. Rather than reinvent the wheel, I was wondering if anyone has found a source and
|
By
Ron Hynes
·
#60221
·
|
|
Re: Tinkling Sound
This sounds like a high frequency resonance issue.
With high frequency I would suspect a small component attached to something larger that catches the wind.
If you touch the offending item sound
This sounds like a high frequency resonance issue.
With high frequency I would suspect a small component attached to something larger that catches the wind.
If you touch the offending item sound
|
By
Paul Harries
·
#60220
·
Edited
|
|
Re: Amel 55 Hardtop & Mainsheet question
For what it’s worth, the boat I test sailed in 2015 had the main sheet go to the mizzen mast, as does my boat. There is a risk with that arrangement that the sheet will wrap around the corner of
For what it’s worth, the boat I test sailed in 2015 had the main sheet go to the mizzen mast, as does my boat. There is a risk with that arrangement that the sheet will wrap around the corner of
|
By
Joerg Esdorn
·
#60219
·
|
|
Tinkling Sound
OK, This is a bit difficult for me, as my ears are so bad that I can't hear it, but it's driving Iris to distraction. It just started a week or so ago, and nothing had changed except we anchored in
OK, This is a bit difficult for me, as my ears are so bad that I can't hear it, but it's driving Iris to distraction. It just started a week or so ago, and nothing had changed except we anchored in
|
By
karkauai
·
#60218
·
|
|
Re: Lithium Battery BMS
Juan,
I bought 8 Lithium Iron Phosphate batteries (LifePO4) of 100 Ah at 12V with built-in BMS modules from Shenzen Yinkai Power Technology Co., Ltd. Website: www.yinkaipower.com.
These batteries
Juan,
I bought 8 Lithium Iron Phosphate batteries (LifePO4) of 100 Ah at 12V with built-in BMS modules from Shenzen Yinkai Power Technology Co., Ltd. Website: www.yinkaipower.com.
These batteries
|
By
Willem Kroes
·
#60217
·
|
|
Re: Shore - Generator Switch-over box on A54
#solution
Hello Mohammad
This is a lot of Inverting power. You probably not need that much unless you want to run everything simultaneously in the boat 😉
Nevertheless, I ordered the MV MassCombiPro
Hello Mohammad
This is a lot of Inverting power. You probably not need that much unless you want to run everything simultaneously in the boat 😉
Nevertheless, I ordered the MV MassCombiPro
|
By
WASABI - Rudolf Waldispuehl
·
#60216
·
|
|
Re: B&G Sonic Speed sensors replacement
Dear Michele we did last year because our probe failed and I have tried with success to replace the older one instead to put a new probe for several reasons . We replaced ( my sailor man didi)
Dear Michele we did last year because our probe failed and I have tried with success to replace the older one instead to put a new probe for several reasons . We replaced ( my sailor man didi)
|
By
Marco Mancini
·
#60215
·
|