|
Re: [Amel Yacht Owners] Re: Intermittent bow thruster - Maramu
Hi Graham,
๐๐ Buon Anno etc.
On 3 Jan 2016, at 12:13, Graham Cresswell grahamjcresswell@... [amelyachtowners] <amelyachtowners@...> wrote:
Hi Graham,
๐๐ Buon Anno etc.
On 3 Jan 2016, at 12:13, Graham Cresswell grahamjcresswell@... [amelyachtowners] <amelyachtowners@...> wrote:
|
By
Jean-Pierre Germain <jgermain@...>
·
#24596
·
|
|
Re: [Amel Yacht Owners] Re: Intermittent bow thruster - Maramu
Graham, The Bison/Buffle series Amel bow thrusters were the very first generation of what was used later until the end of Super Maramu production. The thruster on the 54 and onwards is very different
Graham, The Bison/Buffle series Amel bow thrusters were the very first generation of what was used later until the end of Super Maramu production. The thruster on the 54 and onwards is very different
|
By
amelforme
·
#24595
·
|
|
Re: [Amel Yacht Owners] Intermittent bow thruster - Maramu
Thanks Andrew,
I'm beginning to wonder if, during the panic, I wrongly thought that the bow thruster motor was turning. If it wasn't then plainly the brushes move up the list of
Thanks Andrew,
I'm beginning to wonder if, during the panic, I wrongly thought that the bow thruster motor was turning. If it wasn't then plainly the brushes move up the list of
|
By
Graham Cresswell <grahamjcresswell@...>
·
#24594
·
|
|
Re: [Amel Yacht Owners] Re: Intermittent bow thruster - Maramu
Thanks Eric,
Mine is a Maramu and I'm given to understand that the bow thruster is different to the one on a SM and may be something called a BISON/BUFFLE. However, if there is a
Thanks Eric,
Mine is a Maramu and I'm given to understand that the bow thruster is different to the one on a SM and may be something called a BISON/BUFFLE. However, if there is a
|
By
Graham Cresswell <grahamjcresswell@...>
·
#24593
·
|
|
Re: [Amel Yacht Owners] Re: Intermittent bow thruster - Maramu
Jean Pierre,
It's definitely hull number 240 - it's a Maramu and not a Super Maramu but I agree with you that it behaves more like a long-keeler than a fin and skeg.
Amitiรฉ
Jean Pierre,
It's definitely hull number 240 - it's a Maramu and not a Super Maramu but I agree with you that it behaves more like a long-keeler than a fin and skeg.
Amitiรฉ
|
By
Graham Cresswell <grahamjcresswell@...>
·
#24592
·
|
|
Re: Amel Santorin 108 Vagabundo repaint mast and new rig
one note to my previous message, for fairness: painting the mast has been done in kusadasi by "Basar" with excellent quality, quality problems have been only with "Yakomoz".
If anyone plans to make
one note to my previous message, for fairness: painting the mast has been done in kusadasi by "Basar" with excellent quality, quality problems have been only with "Yakomoz".
If anyone plans to make
|
By
Herbert Lackner
·
#24591
·
|
|
Re: Amel Santorin 108 Vagabundo repaint mast and new rig
Hi herbert,
thank you for your info, my paint on the masts is no so bad, so I am thinking to sand only the broken parts repaint all the masts and boom manteining (where is ok) the old paint using a
Hi herbert,
thank you for your info, my paint on the masts is no so bad, so I am thinking to sand only the broken parts repaint all the masts and boom manteining (where is ok) the old paint using a
|
By
antonio scipioni
·
#24590
·
|
|
Re: Amel Santorin 108 Vagabundo repaint mast and new rig
Hi herbert,
thank you for your info, my paint on the masts is no so bad, so I am thinking to sand only the broken parts repaint all the masts and boom manteining (where is ok) the old paint using a
Hi herbert,
thank you for your info, my paint on the masts is no so bad, so I am thinking to sand only the broken parts repaint all the masts and boom manteining (where is ok) the old paint using a
|
By
antonio scipioni
·
#24589
·
|
|
Re: Amel Santorin 108 Vagabundo repaint mast and new rig
Hi Antonio,
we changed the standing rigging and painted the mast last winter in turkey. we bought the new rig from ACMO what seemed to be the best and cheapest solution, everything did fit perfect!
Hi Antonio,
we changed the standing rigging and painted the mast last winter in turkey. we bought the new rig from ACMO what seemed to be the best and cheapest solution, everything did fit perfect!
|
By
Herbert Lackner
·
#24588
·
|
|
Re: SM shower curtain size?
Russ,
Congratulations. The shower curtains are custom made and not off-the-shelf.
I would check with SAV"at"Amel.fr to see if they have any. The forward is different than the aft. You will probably
Russ,
Congratulations. The shower curtains are custom made and not off-the-shelf.
I would check with SAV"at"Amel.fr to see if they have any. The forward is different than the aft. You will probably
|
By
yahoogroups@...
·
#24587
·
|
|
Re: Bilge Pump on Super Maramu
There is a second pump. It is the manual pump. I have a spare electric gray water bilge pump. It is the exact "Marina" pump. I can swap pumps in about 10 minutes.
I hope this helps you with your
There is a second pump. It is the manual pump. I have a spare electric gray water bilge pump. It is the exact "Marina" pump. I can swap pumps in about 10 minutes.
I hope this helps you with your
|
By
yahoogroups@...
·
#24586
·
|
|
Amel 54 and Freezer # 1
This unit (the one in front of the stainless steel vertical door fridge) has lost all its "Cooling" liquid/material. (It is not Freon but something called R....).
To find the source of the leak, I
This unit (the one in front of the stainless steel vertical door fridge) has lost all its "Cooling" liquid/material. (It is not Freon but something called R....).
To find the source of the leak, I
|
By
galacsea2000 <no_reply@...>
·
#24585
·
|
|
Re: [Amel Yacht Owners] SM shower curtain size?
Hi Eric,
Stand in line at the back... Mine is 27 years old and still looks fantastic.
๐
Jean-Pierre Germain
SY Eleuthera, SM 007
Hi Eric,
Stand in line at the back... Mine is 27 years old and still looks fantastic.
๐
Jean-Pierre Germain
SY Eleuthera, SM 007
|
By
Germain Jean-Pierre <jgermain@...>
·
#24584
·
|
|
Bilge Pump on Super Maramu
I would like to know if somebody has installed a second bilge pump in a super Maramu.
If yes can you send me some pictures of the installation?
Many thanks in advance
Juan de Zulueta
SM year
I would like to know if somebody has installed a second bilge pump in a super Maramu.
If yes can you send me some pictures of the installation?
Many thanks in advance
Juan de Zulueta
SM year
|
By
Juan de Zulueta
·
#24583
·
|
|
Re: [Amel Yacht Owners] SM shower curtain size?
Congrats on your new beauty !!!
I would order it from Amel or at least the textile and the sliders.
I do not know what the curtains are made of. I have never had a boat where the curtain does not
Congrats on your new beauty !!!
I would order it from Amel or at least the textile and the sliders.
I do not know what the curtains are made of. I have never had a boat where the curtain does not
|
By
sailormon <kimberlite@...>
·
#24582
·
|
|
SM shower curtain size?
Does anyone know the size of the shower curtains for the Super Maramu? Are they a "standard" type curtain? We are away and can't take a measure.
We finally found "the boat" and closed on it a couple
Does anyone know the size of the shower curtains for the Super Maramu? Are they a "standard" type curtain? We are away and can't take a measure.
We finally found "the boat" and closed on it a couple
|
By
russ.roberts.va@...
·
#24581
·
|
|
Re: [Amel Yacht Owners] Yanmar Engine issue
Rick,
It sounds as though you are sucking in air somewhere. It you have a loose fitting or seal prior to the raw water pump, air is less resistant than water to move by the raw water pump. The raw
Rick,
It sounds as though you are sucking in air somewhere. It you have a loose fitting or seal prior to the raw water pump, air is less resistant than water to move by the raw water pump. The raw
|
By
Mark Erdos
·
#24580
·
|
|
Re: [Amel Yacht Owners] Re: Microwave dimensions
Alan,
Thanks-There is one available here that was mentioned on this site.
I hope mine is the same size as yours. I will order it and hope it fits.
Thanks
Fair Winds
Eric
Kimberlite Amel Super
Alan,
Thanks-There is one available here that was mentioned on this site.
I hope mine is the same size as yours. I will order it and hope it fits.
Thanks
Fair Winds
Eric
Kimberlite Amel Super
|
By
sailormon <kimberlite@...>
·
#24579
·
|
|
Re: Microwave dimensions
Hi Eric,
Ours is 525W x 310H x 414mmD
Happy New Year
Alan
Elyse
SM437
Hi Eric,
Ours is 525W x 310H x 414mmD
Happy New Year
Alan
Elyse
SM437
|
By
Alan Leslie
·
#24578
·
|
|
Re: Yanmar Engine issue
Thanks all for the quick and thoughtful responses to my engine woes! I have done only a few of the steps suggested. I will immediately begin to explore and test all the options and let you know when
Thanks all for the quick and thoughtful responses to my engine woes! I have done only a few of the steps suggested. I will immediately begin to explore and test all the options and let you know when
|
By
Rick Grimes
·
#24577
·
|