Hi Kristy, Your comment is exactly why I had asked the assembled “gurus”… :-) Jean-Pierre Germain Sy Eleuthera, SM 007

The showerheads are problematical. The fittings on the hoses don't fit ordinary sink type shower heads . Kent SM243 Kristy

They are nothing special.... Equivalents are found in major plumbing shops...like Home Depot (US), Bunnings (AUS) ....just ordinary household stuff...I replaced the shower heads and tubings with

Looking to change my weathered shower heads and sink taps units for new ones. The original manufacturer does not answer my emails. Does anyone have an alternative? I would like to retain the

Super Maramu “Liebling” hull #207 is for sale - Pacific Coast waters of US / Mexico After eleven wonderful years of enjoying our wonderful boat "Liebling", we would like to offer her to a new

Good that the pins were long to accommodate the flange. On Mar 6, 2016 2:57 PM, "sailormon kimberlite@... [amelyachtowners]" <amelyachtowners@...> wrote:

Yes it does. Email ric@... Will call as well. Can deliver. Will send photos too. Ric Gottschalk Kitchen Magic Refacers, Inc Office 410-923-5800 Fax 410-923-5802 On Mar 6, 2016, at 2:04 PM,

Mine was cast stainless steel. I did not bother to measure it since it was a perfect fit. However from memory (I am not on the boat) it wasn’t 12 mm thick. Fair Winds Eric Kimberlite Amel Super

That is good. Did you get cast steel elbow with 12 mm thick flange? Vladimir SM 345 "Life is Good" On Mar 6, 2016 3:17 PM, "sailormon kimberlite@... [amelyachtowners]" <amelyachtowners@...> wrote:

Vladimir, The elbow I received from an eBay supplier was a perfect fit. I did not need to use and gasket sealer. Fair Winds Eric Kimberlite Amel Super Maramu #376

Ric, your last reply did not include a direct email address so please try to call me Sounds like you have what I need. My boat is at the Deltaville Boatyard and they can install it you canship it

Hi, Which is the manufacturer's recommended lub for the furling gear boxes and its thickness? my gearbox has cracked and I seep getting conflicting recommendations fro 'experts'.

Hi Eric, You are correct. That is also a solution. I will try to do that on Monday. I wrote my original email as a warning to those who has this cast elbow. It is not just simple replacement. Did

Why don’t you take the elbow to a machine ship and have them mill off 6 mm of the flange? Fair Winds Eric Kimberlite Amel Super Maramu #376

This is additional information on the thread related to cast stainless steel mixing elbow. Cast stainless mixing elbow is much better part at very good price. I was very happy when I bought one. But

---------- Von meinem iPhone gesendet

Hi Chris hope you are fine 👌 Just recently I found a girl promenading in Zurich with you t-shirt 😎 greetings from Switzerland Hanspeter Tamango 2 Von meinem iPhone gesendet

Hello Bill, Last year I purchase 20 from Amel (La Rochelle), they had them in stock. They were 0.10 Euro each, they call them: Bouchon plastique pour rail/Plastic plug for track Sincerely,

I recently replaced all of mine. I purchase replacement plugs from Amel. Send Maude a picture with the diameter shown as Amel has a couple of different sizes. With best regards, Mark

I bought a bag of them from Amel years ago. Fair Winds Eric Kimberlite Amel Super Maramu #376