Kent if you wish to hangout in Newport you can anchor just up stream from Goat Island and before the bridge. Fair Winds Smooth Sailing To All Capt Richard RP Yacht Brokerage Newport RI We list sell

Dear Ati and Mohammad, I can’t help with the technical issue (I’m sure others will be able to) but I do know that Emek Turkey have a spare Bamar 1.02 [which belongs to me] you could buy that as a

Ours is shaped as a cone. Take a broad screwdriver and a piece of wood to protect your hull and to give you a small angel. Gently push to lid upwards with the screwdriver from different locations. The

Andrew, Pinmar Supply in Barcelona sells this pump. Do you want me to ask them what needs to be replaced if the expansion tank fails? Maybe just the membrane? Bill Rouse BeBe Amel 53 #387 Sent from

Plus put something to pry against to protect the deck. Pry carefully. Bob KAIMI SM 429

Bill Many thanks - very helpful - I am now away from the boat for several weeks but will investigate further on my return. Andrew SM472 On 23 Aug 2015, at 16:03, 'Bill & Judy Rouse' yahoogroups@...

Kent, If you are still at Woods Hole, I am headed down there today to visit the family beach house. If you email me (derickgates "at" comcast "dot" net I would be happy to come and collect you and

Accumulator tanks can be purchased any shop that sells water pump systems for home and farm. If I were you, I'd buy one that is 4-6 liters, assuming you can find a place to mount it. Bill Rouse BeBe

OK, my mistake...I missed "when running water." The possibilities are no accumulation of pressure because the pressure membrane is leaking, or pressure switch failing. Assuming that you have a

Oh, and I assumed that you looked and could not find any running water from an open tap or line. Bill Rouse BeBe Amel 53 #387 Sent from my tablet +39 333 121 8115 Italy Mobile +1832-380-4970 USA

Andrew, All pressurized system water pumps have a one-way valve on the input side of the pump. This allows water into the pump, but keeps it from going back into the tank and the pressurized system

Alan Thanks - they are almost fully in but on the mizzen the last batten is so close to the clew that it is out of the mast - will try again paying more attention to tension. Andrew On 23 Aug 2015, at

Andrew, I can't find your original message.. I've had DV Hydranet sails with vertical battens for 2 years and not had any problems with furling them into the masts. The UV protection provided is

Hi Alan Thanks - sounds like the membrane as it doesn't cycle unless a tap is switched on. Andrew SM472 On 23 Aug 2015, at 12:58, divanz620@... [amelyachtowners] <amelyachtowners@...> wrote:

Hi Andrew, We don't have an expansion tank behind the hot water cylinder, just the one on the fresh water pump. My experience if the pump is cycling on and off is 1. there's a leak somewhere causing

Paul, Do you have a black deck plug ? If so, it will only be stuck, lever it out around the edge, it will come...there's nothing holding it in except friction. Cheers Alan Elyse SM437

We have an IDRO ECOINOX combined pump and water expansion tank unit installed – we don’t have the standard expansion tank fitted behind the hot water heater. We now have the water pump rapidly

Paul, I believe that there are several types of black water access ports on SM's. BeBe 387 simply unscrews and the piece that you unscrew looks similar to the fuel or water ports. Maybe a photo of

As a new owner I wonder how do one open the deck plug for the black water tank? mine looks as they newer have been opened and are stuck Paul on SYKerpa SM#259

Go to portsmouth Ric Gottschalk Kitchen Magic Refacers, Inc Office 410-923-5800 Fax 410-923-5802 On Aug 22, 2015, at 10:35 AM, karkauai@... [amelyachtowners] <amelyachtowners@...> wrote: