Sorry... forgot to tag that post... Gary W. S/V Adagio SM 209 Departing with the Salty Dawg Rally. Sent from my Verizon Wireless 4G LTE smartphone

I had a highly recommended surveyor ce to us, flew him in, put him up in a hotel and had high hopes. After purchase I found a few missed items, one of which was rather important so all in all I can

Ross, I have a SM from 1992. The water heater is in the engine room and the pump is below a deck plate in the galley. I do have the carpeting in all of the compartments. I wish I did not have the

Duane, Probably corroded for two reasons: Close Proximity (just below) the anti-siphon vent for the toilet pumps...probably gets a salt mist from time to time And dissimilar metals.between the valve

I guess that sums up the general opinion on surveyors...no recommendations.

Thanks for the reply Bill. I'm going to try the cleaning route and see how that goes first. Duane

Duane, If you go to this photo album: https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/1208267126 You will see 1 photo of the manifold after I cleaned it on BeBe 387. You will also

Hello all. I got a scratch in the gelcoat (right above the waterline) and look for a repair set with the right colour. Do we have some kind of a colour code or a recommended colour which will come

Should take about 12 days nonstop. I will join the group again when I am in Colombia. Fair winds, Eric SM 376 Kimberlite

I posted some photo's of the raw water header on Wanderer. I'm concerned about the corrosion on the valve and header. I plan on taking it apart and cleaning it up of course, but I'm wondering if I

Can anyone recommend one or more marine surveyors schooled in Amels (SM) for the mid-Atlantic? Specifically Maryland, Virginia, North Carolina. I hope to have the need of one in the next couple of

Good point... I was wondering about the water flow. --------------------------------------------

The cheaper versions of this strainer that cost teens of currency (dollar/euro/sterling) are brass. The cheapest bronze ones I've seen start around 30(dollar/euro/sterling). I know the Onan itself

Or a polypropylene strainer that's 1 1/4" for $28.80 with SS screen from Grainger. Keep in mind that the "20 Mesh" screen has an open area of 46% of the pipe diameter. The flow rate would be

You can find this in the Grainger Catalog in Bronze, 1" with SS screen: KECKLEY Strainer, 1 in., Threaded , 2.62 in. H Item #

Guys 'n gals , for anyone in the UK these can be bought online for £14.95 plus barbs which can't be more than a couple of quid each.... Ian and Judy, Pen Azen, SM 302, Greece To:

JP, I am afraid you are mistaken. The Amazon link that Alex posted is for a 1" brass filtered Y at $9.25 & FREE Shipping in the US. Again, the over-taxed Brussels minions are getting a much worse

Hi Everyone, The unit I priced with the barbs etc is €50 incl shipping and VAT. For once, us poor overly taxed Brussels minions are getting a better deal than the US. :-) Jean-Pierre Germain SY

Ben, OK, good luck. As I remember it, the universal pump simply bolted in place. But I also remember that the hose outlet orientation were adjustable by removing the screws from the pump halves and

Thanks, Alex Bill BeBe 387 On Wed, Oct 28, 2015 at 9:42 PM, Alexandre Uster von Baar uster@... [amelyachtowners] <amelyachtowners@...> wrote: