Hmmm.... interesting. Thank you. That is the name of one person that WAS recommended to me. Mike

Thank you all, I was able to get the halyard down to deck level by using the "two bowline" technique to attach the line extension and then sending someone up the mast. The thin line was indeed

Due to deteriorating health of wife I may consider selling my beloved Maramu, year 1988, hull #253. I am on my way back to Marseille from the Azores. Charles Macdonald

i have a 1983 Amel mango #33 located in north miami. wasn't thinking of selling her. but if your in the area your welcome to come by to take a look danny 305-609-3704.

Gary and Bill, Thanks for this, I was unaware of this adjustment option. I replaced my seals and hope that fixes the issue. I will b sure to check this at next haul out. With best

Thanks Bill! --------------------------------------------

I posted photos of the top of the bow thruster here: https://groups.yahoo.com/neo/groups/amelyachtowners/photos/albums/1587075684/lightbox/1880641546#zax/1880641546 and

I do not remember who had a problem with the fresh water pump cycling, but I had suggested the one-way valve as being one of the causes. I had a piece of trash lodge itself in the one-way valve

Alexandre Yes that looks the same – many thanks Andrew Ronpische SM2k 472 Canet en Roussillion, France

Good morning Andrew, On NIKIMAT (SM2K #289) the Gas light bulb is a: miniature light bulb 757 Since my vessel is older than yours, double check

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the amelyachtowners group. File : /Miscellaneous/BOW THRUSTER RIGGING HOW TO

My previous owner could only find 12V replacements and they burnt out very quickly... I found the same lamp in 24V from RS components, and 2 yrs on it is still working....and I have a

I replaced mine with an LED several years ago, Andrew, but it didn't last 24 hours. I'll try again when the current incandescent quits. Kent SM243 Kristy

Several comments have posited that the bulbs are burning out due to high voltage, which may well be the case. On our SN there is a Linear Fixed Voltage Regulator, which I believe was originally

Our GAS indicator panel light just stopped working – I am quite keen to change it for an LED indicator instead has anyone sourced a good replacement for this or if not know the diameter of the hole

Dereck, I have found that if you make the temporary bowline longer the two bowlines do not have to travel through the notch in the mast at the same time. Fair Winds Eric Kimberlite Amel Super

Good afternoon Mike, I purchased my Super Maramu 2000 in Martinique. I used Martial Barriel and was very happy with his services. Tel: 0590 28 14 41 - Mob : 069055 42

Hello Everyone, Is there anyone here who has purchased an Amel in Martinique and could recommend a good surveyor on the island? Thanks, Mike

Yes, I am a "green striper" as the result of following Gary's instructions and UV. I have had several people ask me where to buy the green. I have told them all the full story. We have only done

Hi Bill: You are great. I am off the boat now for 6 months and I looked to see if I had any stock photos that I could post. At first pass I can't see any. Thanks in advance for posting