Bill, I can do the conversion to metric but, as a reality check, would you happen to know how Europeans refer to that density? I am shopping in the south of France. Greg Shea Sharki 133 On May

Greg, I recommended foam density for interior cushions and mattresses. I really do not know much about outdoor wet or dry foam cushions. That said, if you were not going to allow them to get wet, I

Bill Rouse, I think I remember you making a recommendation about foam density for cockpit cushions but I can't find it. Do you have some thoughts on that subject? Greg Shea Sharki 133

Then hopefully the breaker indicated in the aft head will solve your issue... Sincerely, Alexandre --------------------------------------------

I remember a few yes ago someone posted pics of a beautiful deck paint job..,then posted a few months later that it was all peeling up. What was the mistake made on that

Using a striping tool with a striping paint wheel about 60% the size of the stripe, Judy painted ours in two days. Lightly sanded using sand paper wrapped around a cork block, wiped with thinner then

Kent, Your light breaker is on the DC panel...older boats, it is located in the aft head. You are not blind. Best, Bill BeBe 387 Currently di Ragusa, Sicily

Merci Olivier, glad to hear I'm not blind or (that) dumb. Kent On May 29, 2015, at 9:20 AM, Beaute Olivier atlanticyachtsurvey@... [amelyachtowners] <amelyachtowners@...> wrote:

Hi Mike. I'm talking abt the one for the aft cabin lites. Kent

Hello breakers chasers, the SM2K haven't got this breaker in the aft heads but at the 24V panel in galley. Have all a good day. Olivier. On Friday, May 29, 2015 3:06 PM, "'Mike Ondra'

Well, I see that the pasted in diagram did not transmit through yahoogroups. Sorry about that. I guess the words will have to do. Mike Ondra From:

On Hull #240 the 30 amp genset breaker is on the aft end of the Onan Control Panel as shown in the diagram from the service manual. Mike Ondra S/V Aletes SM#240 From:

Kent, I think on our model, it is located ont he 24 volt panel. I also looked and didn't find anything... But yes would love to see a picture too! Sincerely, Alexandre SM2K #289 NIKIMAT Grand

Can someone take a pic that shows where this breaker is? Either I'm blind or I don't have one. Kent SM 243 Kristy

Good morning Jim, Thanks for the update and most importantly to glad it was not due to a problem! Sincerely, Alexandre --------------------------------------------

Alexandre, Bill, Mike, Andrew and Mr. Olivier BEAUTE,Problem solved, thanks to each of you. Indeed Alexandre, it was the breaker on the aft end ofthe generator which tripped due to (my) user error

Use imron paint and pinstripe tool. Rolls on easily. Bali Hai SN24 Annapolis Ric Gottschalk Kitchen Magic Refacers, Inc Office 410-923-5800 Fax 410-923-5802 On May 28, 2015, at 5:14 PM, Stephanie

My summer project is to paint the brown stripes on the deck. We have SM hull 353. Can someone recommend the best paint to buy for this tedious project? Many thanks and Fair Winds! Stephanie