This is one of the things I like so much about this group. Lots of different solutions to the same issue. I'm looking at the rake of the bars on the Bimini and except for the aft one don't see but

Hi, my HP pump is a 2.5kw and will not start but can be made to run by removing cap from pump and start rotation by hand. There are 2 start capacitors, unfortunately details unreadable. I found

Hi all, been watching this thread. When we bought Ocean Pearl we extended the bimini to cover the full cockpit. We put a bar (SS tube) across behind the mizzen mast above the boom. It is fixed only at

Sorry, my fault forgetting to include my hull number. Also,I found a screen repair facility in the Boston area that is fixing this for pennies. Figured I'd ask to see what others have done. Bill It's

Kent Thank you! In the mean time I manage to get out enough with silicone to insert two new rivets, I will make a proper fix when convenient and enough rivets to fix it all, but I assume it will take

Hi Paul, Yes, there should be silicone injected into the hole before the rivet is installed. You'll raise the foil, and remove the old silicone. You may have to remove the fore stay to get at

When changing the rivets in the furler, can you change one at the time or do you need to take out all at the same time and disconnect the profile from the furler to get rid of the "rest" from the old

Hasn't the type of equipment changed over the years? Which model and seriel no are yours? /Ann-Sofie S/Y Lady Annila SM 232 Present in Sardinia Skickat från min iPad 5 aug 2015 kl. 17:16 skrev

Hi Alex, yes we installed a separate hose to the freshwater footpump and then to a whale faucet on the timber facing behind the sink. That the freshwater pressure system and footpump system are

Kent, Thanks- Fair Winds Eric

Kent, Besides Mystic seaport, I love Block Island, Nantucket, and Newport. When do you think you may be here in Huntington. If you can try to go up the east river at night. Sailing/Motoring along

Paul, Search "Bimini" in photos. Bill Rouse BeBe Amel 53 #387 Sent from my tablet +39 333 121 8115 Italy Mobile +1832-380-4970 USA Voice Mail On Aug 5, 2015 6:13 PM, "osterberg.paul.l@...

Hi Kent, Thanks for the welcome! I'm not sure how long I'll be in Charleston. I would like to sail on up the Coast a ways while it's still hot. But as much as I like Charleston, there's a real good

Good afternoon Kent, The end of the boom to the cockpit floor is 72 1/4” or 183.5 cm with the sheet pull down. and 73 1/8” or almost 186 cm with the sheet relaxed. I would be curious to know

Welcome to the group, Joe. I'll be in Charleston for a few days in October...maybe we can have a beer and compare our babies. Kent SM243 Kristy karkauai at yahoo dot com

Hi Eric, I own CloudStreet (that is still her name). I purchased her in December of last year. She is a 2001 Super Maramu 2000. Hull #331. Currently in Charleston, SC. Why do you ask? Joe

Hi Alexandre, I'm curious about the height of your boom over the cockpit. I have to pull down on the frame for the original cockpit cover (not a true Bimini like your added one) to get it aft without

Hi Paul, Yes, there are some photos of our bimini somewhere on the Amel owners photo section--try searching under Pen Azen. We, too, never sail anywhere with the bimini down. If I won the

Mystic seaport!! With a slice of heaven. Great museum. Ric Gottschalk Kitchen Magic Refacers, Inc Office 410-923-5800 Fax 410-923-5802 On Aug 5, 2015, at 1:11 PM, karkauai@... [amelyachtowners]

Good morning Paul, Congratulations on being the new owner of #259 I posted some picture of my biminis on http://nikimat.com/bimini.html In my opinion, the original Amel bimini is great for moderate