Hello, I got the B&G instruments, transducers and sensors and the Hydra 330 installed on my SM (build 1992). The processor does no longer work and after calling into B&G UK, I learned that there is no

Hi Olivier, Still looking at the bonding and came across the below. Do you know should there be a bilge strap on a Maramu 46. The keel is bolted so I presume it should be bonded. As far as I can

Hi Gary, I just received the same equipment as you have. I have sent emails via the wifi access point, and made calls with the phone, not using the access point. I haven't tried using the phone

Hello, I know this is off topic of our boats, but I am working with an Iridium 9575 (Extreme) and an Iridium Axcess Point router ((WiPipe) and they are giving me geek-fits tonight. Wondering if

Hello Mr. Romano, I apologize for my late reply. In the photos it is indeed the propellant that we installed on our boats. Can you tell me which parts you need, knowing that we cannot provide

Hi I have written to Amel Med for same reason. This is the reply. ================================================================================================ Bonjour Monsieur Romano,

Good afternoon James, bonding all the metallic items that are in touch with seawater helps fighting galvanic corrosion. This concerns mainly the items under waterline, but also the fuel tank and

Hi Bill, I should have known it would be practical… :-) I’ll do something similar… diving “sans” the entire kit is a blimey good idea. I too have a prob with junk in the carb.. made worse

JP, I went to a dive shop and told them that I wanted two things: A fifty foot hose that would attach to my dive tank regulator and a an air-jet nozzle that I could attach to the other end of the

Hi Bill, I wish to get an air line as you have. What did you use? Kind regards, Jean-Pierre Germain SY Eleuthera SM 007

Eric, Thanks, Your suggestion is what should be done if done 100%correctly. I cheated. I tried a shortcut (me?) that worked. I assumed that the blockage was probably at a ball valve and several pieces

Bill, My first thought is to follow the hot water line back to where it is somehow joined to the another hot water line that You know Is working and disconnect it at that point. I would then go to

Ground fault, not "group fault." Sorry for the typo. Bill BeBe 387

I should remind you what I forgot yesterday. When replacing the heating element on a Isotemp Basic 40, be sure to order a gasket. A gasket should come with the element, because it will certainly need

Go it. Thanks Bill

Eric, Yes I received the drawings. I have not looked at them yet because I do not have a large screen available for two more days. The grease seal on the manual main mast furler began leaking oil.

Thanks Oliver & Bill, Fantastic response but I think my question was a little missleading. I am not so concerned with lightning. (well I am concerned but am off the belief that if it is going

I was asking about the drink cozy and where did Bill put it. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Mark. That Furler is designed to drop off the Furler so you can manually furl with a winch handle. I've not taken it apart, but getting it off the foil shouldn't be a problem. There are quite a

Bill, I was saving this message. On the reread I do not understand it. Did you get the brake drawing and photo? Fair Winds Eric Kimberlite Amel Super Maramu #376