Bonjour Drew, I also ordered directly from ACMO and asked Russo Yachting. They did a great job, very professional. You can call the owner Mr Duthoit at 0685340549 They are based in La

Hello Drew I know Seanergie un Hyeres . I will have my forestay replaced soon. I have selected Seanergie to Di the job. Regards Alain SM 146/Koriolys Gruissan / France Envoyé de mon iPhone

Does anyone have any experience/recommendations with getting an Amel SM2K re-rigged in either Antibes or Hyeres? I've ordered the rigging from ACMO but don't have a rigger. We're hoping to get this

Bill, I ordered a new 70" hose and SS. fittings from the link you sent me. Approx. $125 with shipping. Thanks, Pat

Pat, Zinc plated??? From

Ron, Thank You, but I just ordered a new hose from the company that Bill sent me a link to. They are in Philadelphia , maybe 75 miles and they will ship it. The more local outfit wanted $80 per

Pat, if I recall you’re on the East Coast of the US, correct? If so try a company by the strange name of Collilower. They have over 30 branches from New York down to Florida I believe. A few months

Bill, The two I have dealt with ,did not carry them in stock and I don't think they wanted to bother ordering them in for one small job, I will see if I provide the part ,they will crimp it on. Thanks

Any hydraulic hose fabricator (heavy equipment) may have them. My experience is at least half have the fittings in stainless steel. Maybe you buy the fittings and have the shop do the crimp-on.

Bill & Bill, Thanks for explaining the numbers and their meaning. I really could not understand how the prefilters could be "special" , according to the dealer,thus the reason I asked my team of

Pat, I can assure you that there is nothing at all "special" about the prefilters used for a watermater. A 5 micron rated filter will do fine. If you have dual filter housings in series, a 20 or 25

The 160 takes 2 each SW30-2540. SW = Saltwater 30 = Type 25 = 2.5" diameter 40 = 40" long Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galveston Island, Texas

Dear Bill Great deal. I may need to replace my genoa un a near future. Thank for all advices Best regards Alain SM 146 Koriolys Gruissan / France Envoyé de mon iPhone

Germain, They are about $20/each cheaper ,they also suggest membranes made by AMI in the US ,that are about $75./each cheaper, $183. and is a direct replacement for Filmtec SW 30-2540. Thanks, Pat SM

Pat, I use Water Anywhere for my Filmtec membranes Much cheaper… Jean-Pierre Germain, SM007, New Zealand

Dominique & Chuck , Thanks for the info , I will look up a Flimtec dealer. Thanks Again, Pat SM Shenanigans

As you all know, Incidence Sails is the supplier of sails to Amel. Incidence has a new policy regarding mainsail battens. The following is from Thierry MONGE at Incidence: We make the mainsails

Hi Bill, I see your point on the halyard tension. I will pay more attention to this fact when we mount the Genoa after hurricane season. The electrical winches are so powerful that a moment of looking

Hello Patrick, The filters sold by Dessalator are lengh 25 cm diameter 59 mm outside 29 mm inside. (5 and 25 microns). The membranes sold by Dessalator are Filmtec model SW30-2540 for the 160 liters

Hi Pat, I stock up on these 5 and 20 micron from Amazon. I have the same watermaker as you. All the best to Diane.