Hi Laurens, 1. Until today, we had no problems furling and unfurling the main and mizzen, no matter which angle to the wind the boat was facing and how strong the wind was. 2. We had these concerns

Hi Martin, Very interesting and many thanks that you made us aware of the way a sail can be build. I checked the website of Stade and almost sure I’m going to visit them soon to discuss the

Interesting. None of the 54s I have seen (probably 30-40) have battens this low. Everyone I have seen has battens in about the top 1/3rd to top 1/2 of the sail.

Hi, here a pic I made today. It shows the fourth of five battens of the main. I furled it to a position to demonstrate the slant of the batten. The top of the batten pocket has disapeared in the mast,

Thanks for the superfast response!! @ Ann-Sofie right now she's located in Gävle Sweden Kind Regards Peter Attinge Den ons 21 juli 2021 kl 18:12 skrev Ann-Sofie, S/Y Lady Annila <ann-sofie@...>:

Hej Pete Välkomnen till Amel familjen ◡̈ (Hi Peter, welcome to the Amel family) Take a better picture if the broken part and send it to Maude at sav@... and ask if they have it as a spare part.

Many thanks Bill!!! Helen

Email vikasa.vignando@... or phone Pierangelo Vignando +41 79 447 21 42 (French ONLY). Tell him that Bill Rouse gave you the contact info. He owned the company that made these for Amel. He has only 2

Helen, You may not need the "threaded rods" that Kent mentioned. Here is a translation: This, except use Nyloc nuts: Nyloc Nuts: Instead of these 4 bolts and nuts:

Hello al Amel friends! i have just payd the first 10% for a SM2K 2005. Son named S/Y TINTIN The gearbox for the jib is broken. the owner is willing to reduce the price for a repare and leave me to

Hi Kent and Iris, Thank you very much!! Bill just sent me a file which has a plan for the alignment tool so we will definitely get one made. We had asked Maud for one but they no longer stock

Hi Helen and Kosta, I replaced Kristy's drive several years ago. It was straightforward. If you don't have the alignment "tool" for aligning the engine with the drive, you should really have that.

Press and hold the Reset (or older model "Z") button on the chain counter to turn it off, or to turn off power to the chain counter turn off the toggle switch on the 24-12-volt converter marked

> > Dear all, > > We just received our brand new drive unit from Amel and are wondering if anyone else has replaced theirs and has any advice for us. We have a mechanical engineer to do the job

Helllo Richard, Our Unold induction cook plate has suction cups and is very secure on our Corian counter top during very heavy weather. Otherwise, it resides on top of the gas burners and stays well

Does anyone have a good wiring schematic for the original Pochon Chain counter. I have the factory drawings which are not decipherable even if you read French. I have 3 cables coming to the panel

We are contemplating osmosis treatment for our Mango. Unfortunately our boat seems to be a victim of the 'bad' resin catalyst used in the mid 80's. We have lots of large blisters (up to 40mm in

Hi All, yesterday we had some interaction with Orcas some 5-7 miles west of Tarifa, Spain. Some informations: - in our opinion they were a female adult and a juvenile. - The animals did not appear

Hi Randall, here some pics. The mizzen (2 pics) is unfurled completely. You can see the first batten is in a closer distance to the mast, the space between the next battens is larger. Its not to see

Hi Ralph, I replaced the Navnet 3D BB system with the latest Furuno gizmos. The good news is you don’t need a TZT3 plotter for in the cockpit. The TZ2BB can control 2 displays independently. So I